Question about 2006 Ford Mustang

1 Answer

Right tail stop light on 2006 mustang do not turn on when pressing pedal.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,116 Answers

You need to replace the bulb, it is burned out.

Posted on May 28, 2011

  • Gale Todd May 28, 2011

    Open the trunk and look to the side that the bulb is out and there is a cover with a torx screw through it. Remove the screw and the carefully pull the cover back and the socket is right there. Remove the plastic cover on the affected side. The plastic screws take a #20 Torx bit. The bulb socket will be exposed and you can twist it off.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 trailblazer, i have no: tail, plate, parking/ running lights.


The only thing I can think of is corrosion inside the lamp socket due to repeated condensation. Can you unscrew your tail light assembly as if you are going to replace the bulbs? Usually a push in, quarter turn to pull the bulb out, then inspect the inside socket. Use sand paper then paper towel to remove it. Some folks use lemon juice on the paper towel. Re-insert and have some press brake pedal. A whole new assembly is only $30 or so.
Search from over 10 Million Auto Parts

Nov 15, 2016 | 2006 Chevrolet Trailblazer

2 Answers

The brakes lights don't work. can't tell which fuse to replace, manual does not explain well enough


You have a high mount brake light. Press the brake pedal. If it doesn't come on, replace the brake switch at the brake pedal. If it does come on and the tail lights don't, replace the turn signal switch.

Sep 24, 2016 | 2006 Hyundai Tucson

1 Answer

2006 monte carlo lt tail lights not working


does the tail lights go on when you put on the head lights? with the head lights off and the brake pedal pressed does the light go on? if the light go on with head lights and not with the brake pedal it is a your brake light switch. it is located on the brake pedal

Feb 09, 2013 | 1995 Mitsubishi Galant

1 Answer

I have a 2006 F150 and all brake lights stopped working. Blinkers and tail lights work. I replaced the Brake light Switch and it did not fix the problem. Is there a relay somewhere? I do have the to...


Did you check the fuse for the stop lamps ? This is cab fuse panel F2 ( where the turn signal is fuse F13 ).

When you tested the old or new BPP ( Brake PEdal Position ) Switch, did you have power on the side from the fuse ( this is the light green w/ red stripe wire ) ?
When you pressed the brake pedal down, did you have power on the side towards the brake lamps ( this is the Light green wire ) ?

Oct 13, 2010 | 2006 Ford F-150

1 Answer

Keep blowing right rear tail light


You have a bad bulb socket. find where that sovket plugs to harness unplug and replace

Jul 15, 2010 | 2002 Jeep Grand Cherokee

1 Answer

No dash & tail lights


if your tail light's don't work it would be a stop switch it's right under the brake pedal.

May 05, 2010 | 1986 Ford Mustang

2 Answers

Brake lights stopped working 1998 mustang


Fuse panel is under the dash also as I have found with my own graceful daughter, there is a brake light switch that connects to the brake pedal itself. It is hard to get to and even harder to see but a lot of times these switches get bumped and they can not make connection when the brake pedal is depressed. Hope this helps

Feb 06, 2010 | 1998 Ford Mustang

1 Answer

Can left 2000 mustang tail light lamp be replaced


Call a different dealer I never heard of that on any left or right tail lamp.
center stop lights yes I have

Feb 04, 2010 | 2000 Ford Mustang

1 Answer

Only one tail light (on the right side) lights up


Check fuses at dash panel as well as any under hood in power distribution box, they all may be separate.

May 18, 2009 | 2006 Ford Mustang

Not finding what you are looking for?
2006 Ford Mustang Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...