Question about 1987 Chevrolet R30

Open Question

Remove r30 brake caliper on 87 chevy rv - 1987 Chevrolet R30

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
sledge1863
  • 149 Answers

SOURCE: chevy s10 brake caliper

Hey zach, no they are not reverse thread. They are most likely just very tight from the heat and cool cycles they go thru. Put your wrench on them and give it a few sharp raps with a ball peen hammer. That should break them loose enough to finish with the wrench.

Posted on Mar 02, 2009

Ad
  • 2 Answers

SOURCE: what size wrench is needed to remove the caliper

10mm, if I'm not mistaken.

Posted on Jul 17, 2009

  • 198 Answers

SOURCE: removing chevy venture caliper

Yes it's the right direction but because of so much heating and cooling those bolts get really tight.Spray alot of penetrating oil (WD-40) on and around the bolts.You may even want to tap the wrench on the bolts in the opposite direction slightly (tighten) to help loosen their adherence,then try the right way to losen them.Dont use a torch! It'll melt the "O" ring on the caliper piston.Take your time

Posted on Sep 14, 2009

  • 7353 Answers

SOURCE: caliper pins for brakes on 2003 chevy t50 is to small t55 to big

yes torx.

Posted on Sep 23, 2009

john631068
  • 172 Answers

SOURCE: how take off pins not bolts on caliper 87 Ford Ranger front brake

The pins / wedges just tap out use a scewdriver on the metal edge of the pin just tap it out to the rear and when putting them back in just tap them back in from the front. You will see they are diamond shape and metal cased around rubber very easy to do just take your time.

Posted on Nov 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What size allen needed to remove break pads


Allen wrenches usually come in a set, try 3/8.

Apr 30, 2016 | 2008 Chevrolet Chevrolet Impala LS

1 Answer

Replace rear brake pads 2006 Chevy Impala


Hello, to replace the rear brake pads follow the following steps:

1. Lift the Chevy Impala with the jack and place it on jack stands.
2. Remove the wheels with a lug-nut wrench and set them aside. The lug-nut wrench can be found in the trunk of your Chevy Impala.
3. Remove the caliper with a ratchet and use a bungee cord to hang the caliper. Do not let the caliper hang from the brake hose, as the hose might break and cause fluid to leak.

4. Remove the brake caliper bracket from the steering knuckle with a ratchet. Set it aside.

5. Remove the break rotor from the hub. The rotor might require force to be removed; if it does, use a hammer to hit the rotor in the center, where the lug studs are located. Take care not to hit the studs.

6. Remove the new rotor from its packaging and use brake cleaner to remove the grease from the rotor. Grease is applied on the rotor in the factory to inhibit rust during storage.

7. Install the new rotor onto the hub.

8. Install the caliper bracket with new brake pads onto the rotor and fasten it to the steering knuckle. Use a ratchet to tighten the bolts.
9. Open the master cylinder reservoir so you don't break a seal while compressing the brake caliper.

10. Compress the brake caliper with a C-clamp, so that the caliper can fit over the new brake pads. Install the caliper by securing it to the brake caliper bracket with a ratchet.

Thanks


























Jul 19, 2010 | 2006 Chevrolet Impala

2 Answers

Removed two bolts from caliper on chevy venture


Here's a great video that will show you exactly how to remove the rotors from your Chevy Venture.">

Apr 06, 2010 | 2001 Chevrolet Venture

1 Answer

How to replace front brakes on 2000 chevy 2500hd 4x4


jack up support truck remove wheel remove two bolts on back of brake caliper lift off caliper use a c clamp and one of the old brake pads slowly compress brake piston flush replace brake pads and reassemble

Oct 19, 2009 | 2000 Chevrolet Silverado

1 Answer

How do you release the anti-lock brake system to replace the rear brake rotors on a 2001 Chevy Impala?


I assume you want to take the caliper off first. Remove caliper bolts & using a pry common screwdriver pry piston on caliper back in a bit or enough to allow the caliper's removal. After this, remove rotor. I hope this helps!

Oct 03, 2009 | 2001 Chevrolet Impala

1 Answer

Need to know how to remove the front rotors off of a 1987 chevy k-5 blazer?


remove tire remove both bolts from caliper remove caliper and secure out of way dont let hang by brake line remove both bolts from brake caliper mount bracket located on backing plate remove and slide rotor over hub

Sep 28, 2009 | 1987 Chevrolet Blazer

2 Answers

How do i remove front pads from 89 probe?


the caliper has 2 bolts holding it in.remove the bolts.slide off the caliper and replace the pads.you need to put a lubricant on the pads,and compress the pistons in all the way with a caliper piston tool,costs about 10 dollars.,or the new pads which are much thicker will not go on.also lube the bolts,known as slider pins or they can jam up.if there is brake pulsation you need to turn the rotors.to remove the rotors ,you need to remove the bracket that the caliper bolts to.there are 2 bolts holding on the bracket.then the rotor can come off to be turned.if the rotors are not thick enough after turning,,they need to be replaced

Jul 13, 2009 | 1994 Ford Probe

1 Answer

87 chevy r30 trans doesn't want to shift and slips


Change the coolant temperature sensor.
Report.
Vitally

Jun 02, 2009 | 1987 Chevrolet R30

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...