Question about Nissan Pickup

Open Question

I am chasing a Nissan Patrol RD28 (2.8 TD) Engine - Factory Service Manual. I specifically want the headbolt tension and tightening sequence.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 341 Answers

SOURCE: i need headbolt tightening sequence

Most head torque sequences start in the middle and work in a circle to the outside edges.The reason for this is because it keeps the head flat because most warpage starts in the center and gets worse on both ends or vise versa.Torque the head in three sucessive steps. It gives the gasket a chance to compress evenly and the bolts to stretch preventing fatigue.

Posted on Dec 01, 2008

  • 158 Answers

SOURCE: nissan patrol

1 st stage tension is 59 nm

2 nd stage tension is 108nm

hope this helps you out

Posted on Mar 08, 2009

  • 34 Answers

SOURCE: Cyl. head tightening torque and sequence for a

The online manuals are a super help. I use them all the time. http://www.autozone.com/autozone/myzone/profile/membershipBenefits.jsp

Posted on Oct 14, 2009

MNfisherman
  • 11896 Answers

SOURCE: Replacing the Cylinder head on a QR20 engine

Hello. I can help you out. Just need to know if it is 2x4 or 4x4 and what liter size is this engine?
You can go to autozone.com and register for free and you will get full free online repair manual.
Just let me know.

Posted on Nov 15, 2009

Autodarwin
  • 54 Answers

SOURCE: I want to know the torque tension settings for a

I would not trust anyone but the manual on this one got to your local parts store and get a Haynes or Chiltons

Posted on May 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have changed cylinder head gasket and need the torque settings for the zd30 nissan engine


try this head torgue link.. that wont highlight

http://www.cylinderheadsaustralia.com.au/torque-settings

the ZD30 is listed half way down the list
and picture of tension sequence

HEAD BOLT TIGHTENING SEQUENCE.
• STEP ONE: 102Nm
• STEP TWO: Loosen All Bolts.
• STEP THREE: 44Nm
• STEP FOUR: +90*
• STEP FIVE: +90*
• IMPORTANT: ALL BOLT THREADS, BOLTHEADS AND WASHERS MUST BE LIGHTLY OILED.
• USING AN OLD HEADBOLT WITH GROOVE CUT DOWN THREAD, CLEAN THE BLOCK HEADBOLT THREADS.




why are these torque setting and sequence
numbers no longer on the VRS head gasket packaging

Oct 28, 2016 | Nissan Cars & Trucks

2 Answers

Gmc 2003 yukon xl denali 6.0 v8 head cylinder bolts torque


Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
· Tighten the cylinder head bolts.
Tighten
1.Tighten the M11 cylinder head bolts a first pass in sequence to 30 N·m (22 lb ft).
2.Tighten the M11 cylinder head bolts a second pass in sequence to 90 degrees .
3.Tighten the M11 cylinder head bolts (1, 2, 3, 4, 5, 6, 7, 8) to 90 degrees and the M11 cylinder head bolts (9 and 10) to 50 degrees a final pass in sequence Tighten the M8 cylinder head bolts (11, 12, 13, 14, 15) to 30 N·m (22 lb ft). Begin with the center bolt (11) and alternating side-to-side, work outward tightening all of the bolts.

25713066-cke0xeuuw3cel0i3clrurogv-4-0_0.gif

May 25, 2015 | 2003 GMC Yukon Denali

1 Answer

I would like to replace the injector oil seals in my ZD30 Y61 2001 Nissan Patrol and I am chasing an engine rebuild manual to help me out. Is there any such manual or information available???


ok if you want to do it yourself you can try by disconnecting the battery cable, then release the fuel pressure by removing the gas cap, then remove the fuel lines from the fuel rail, and the fuel rail holding bolts, then carefully remove the injectors from the rail, then remove the seals,and when replacing the seals wet them with some brake fluid and instal them you need them to slip in smoothly

Feb 24, 2015 | Nissan Cars & Trucks

1 Answer

Cylinder head torque settings


Thread Head bolt torque and sequence
Read the threads, but it states:
According to my manual the removal and the replacement sequence are different. Removal (looking from the cam sprockets )
headbolt 1-3-9-5-7 are on the left and 2-4-10-9-8 are on the right. Remove in that progression.
Instillation 9-5-1-3-7 are on the left and 10-6-2-4-8 are on the right tighten in that order.
Tighten to 25Nm or 18 ft/lb. and retighten the cyl hd blt 70 deg plus 70 deg plus 50 deg using the angular torque guage KM-470-B.
Hope this helps. Might help to make a sketch and label the 5 headbolts on each side.

Sep 03, 2014 | 2005 Chevrolet Aveo

1 Answer

Workshop manual for a 1994 nissan serena


Cylinder head bolt torque sequence
The Rod Bearing Cap Torque
The Main Bearing Cap Torque 38 Foot pounds (Final torque)


Step 1: Torque 10-12 Ft/LbsStep 2: Torque 17-21 Ft/Lbs


Note :
Torque sequence ------------------------
' 11 '
front ' 13 9 3 1 6 8 '
of ' '
engine ' 14 7 5 2 4 10 '
' 12 15 '
------------------------
Step 1: Torque all bolts in sequence 22 Ft/Lbs
Step 2: Torque all bolts in sequence 47 Ft/Lbs
Step 3: Loosen all bolts in reverse sequence
Step 4: Retorque all bolts in sequence 22 Ft/Lbs
Step 5: Retorque all bolts in sequence 43-51 Ft/Lbs
Step 6: Retorque bolts 11 thru 15 in sequence an
additional 4-6 Ft/Lbs
** CAUTION ** This engine uses 2 different length head
bolts. "#1" Is the long bolt, while remaining bolts
are short. **Do not confuse location of these bolts**
recheck final torque in sequence

Dec 06, 2012 | Cars & Trucks

1 Answer

I need the headbolt torque specifications on a 1987 cheverolet cavalier with a 2.0 litre engine


My Chilton manual tells me 65-75 ft.lbs. I cn't send pics so this is the best I can do with tightening sequence.

push rods
engine 9 5 1 3 7 flywheel
front 10 6 2 4 8

Hope this helps.

Aug 23, 2011 | Chevrolet Cavalier Cars & Trucks

1 Answer

Nissan patrol


1 st stage tension is 59 nm

2 nd stage tension is 108nm

hope this helps you out

Oct 26, 2008 | 1990 Nissan Pathfinder

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...