Question about 2003 GMC Sierra

2 Answers

Window fell into door

How do you get the panel off inside and is it hard to fix (put back on track)

Posted by on

  • davengail Nov 19, 2008

    Cold morning. Popped something cranking down window. Suspect some lever arm broken. How do I get off panel to repair/replace part? Dave G

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

Well if u wanna contact me ill walk u through how to get the panel off......and no u cant put it back on track....u have to replace the regulator. Its really easy.....u should buy the reg with the motor attached....its only like $20 more....and moving the motor from one reg to the other can be tricky

Posted on Jan 24, 2010

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Hi,
It is pretty easy to fix the panel. 
Doing it on your own with out any expertise may be tiresome. So, I would suggest, you take the car to a mechanic nearby.

Posted on Oct 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drivers window fell off the track. how do I put it back?


just remove the door card/panel , lower the regulator/winder and manipulate it back into position then secure it.
You may want to investigate why it came off.
h

Jun 14, 2015 | 2009 Cadillac CTS

2 Answers

The front passenger window in my 2004 freelander has dropped how do I fix it.


pull out the door panel and put it back on the track just the window up and then slid it back on the track and tighten the bolts on the track : )

Jan 15, 2013 | 2004 Land Rover FreeLander

1 Answer

How do I get window out of car door


got to take the door panel off to access the down window not a hard fix Chrysler Plymouth and Dodge all have that problem its a little plastic tab that break causing the window to fall you will need the window regulator.

Sep 21, 2012 | 2002 Dodge Caravan

1 Answer

My front driver window fell off the track or the clips fell apart. I got the interior panel off have realigned the glass...... Now what, is there a diagram of the window and track so that I could just put...


you should have adjustments along the bottom of the tracks, what you need to do, is get the window inside those glides, and squeeze the slides into the edges of the glass window, that should keep it in line and on track here watch this, it might give you a better idea, this is pretty much the same as with Most door glass http://www.youtube.com/watch?v=Uu3SiUyWo-8

Jul 19, 2011 | 2001 Lincoln LS

1 Answer

Passenger side window came off trac and is sitting in door


you have to remove the door panel..unbolt the tracking from inside the door..slide the windows back inside the track rails....push window all the way up..tape the window so that id does not fall back down or have someone hold window up while you rebolt the track to the door.replace door panel....the tracks move over time and that it why the window fell.

Jan 26, 2011 | 2004 Cadillac Deville

1 Answer

Hello my right power window is off track.how hard is it to dismantle and put window back on track.How do i get to the window/glass


You remove the door panel,to get to everything.
You may have to replace the window regulator or cable.
You don't just put it back on track,it broke.
Were long sleeves and thin gloves,to avoid cuts,while working inside the door panel

May 12, 2010 | 1998 Ford Expedition

1 Answer

The drivers side window just fell, but i can still hear the motor turn when i push the button....what happened and how do i fix it??


Your window came off the track. You need to take the door panel off the inside of the door. Once you get the panel off you will see how the window operates and the track that it sits inside normally. I suggest purchasing a repair manual. A repair manual for your specific vehicle will have pictures to aid you and will boost your confidence to attempt the fix yourself. Remember, something made your window come out of the track. You'll have to figure that out before you bother putting everything back in place. A lot of those parts are made of plastic and become brittle. Good Luck

Mar 24, 2010 | Mercury Cougar Cars & Trucks

1 Answer

How to put a window back on its track in a 02 mustang


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull off the weather seal and you can readjust the window from there

Oct 13, 2009 | 2000 Ford Mustang

1 Answer

99 ford ranger, electric windows, glass off track and fell inside door, can I fix it myself?


yes,

remove the door panel. typically it has to be pryed off. be careful when it pops off not to let it all to the ground because it will pull the wires out.
Once it is off there is a rail on both sides of the door. One of them has came loose. determine which one and put it back on the window and then make sure to tighten it back down. then put panel back togther. it will take about a half hour to an hour.

Oct 12, 2009 | 1999 Ford Ranger SuperCab

4 Answers

Door window on 2000 jaguar s type


take off inner door panel, lower track and put the window back in. If parts on track are broken buy new ones. Use urathain to reinstall window.

Jul 28, 2008 | 2000 Jaguar S-Type

Not finding what you are looking for?
2003 GMC Sierra Logo

495 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

67757 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22005 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...