Question about Honda Accord
Posted on May 27, 2011
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: headlight assembly
you will have to remove the front bumper cover to get to 2 bolts and also the grille to get another bolt off also there are are a total of 5 bolts that hold it in. be careful taking it out as you can crack the mounting brackets for the assembly just be patiece it will come out.
Posted on Dec 09, 2008
SOURCE: Radio code for 95 Honda accord
Hey that is suppose to be a free service, Make sure it is not in your glove box somewhere first. Then call a different dealership and ask to speak to the parts manager. I'd let them know that you expect them to help. If you do not get satisfaction go over his head.
Posted on Dec 17, 2008
SOURCE: vss for honda accord 95
there is a ten millimeter bolt holding it in remove this then depending if you have a factory or afterrmarket replacement you may have to remove the three tourqe scews fom sensor and replace just the electrical portion of the swith and reuse the shaft. Be sure to lubricate the shafts oring before reinstalling and double check to makesure the sensor is seated before installing the ten millimeter bolt. this can some times be tricky because the gear on the sensor doesnt mesh eith the gear in the diff just rotate the sensor side to side if this happens until it bottoms out
Posted on Feb 01, 2009
Detach the cable from the negative terminal of the battery. Caution: If you have an anti-theft radio, make sure you have the activation code before disconnecting the battery.
Clearly label, then disconnect the wires from the terminals on the starter motor solenoid (the smaller cylinder attached to the starter). Disconnect any clips securing the wiring to the starter.
Remove the mounting bolts (2) and detach the starter (pull it gently out of its housing).
Reverse this procedure for installation.
Hope this helps you.
Posted on Jan 08, 2010
Tips for a great answer:
Mar 25, 2012 | 1994 Honda Accord
Dec 15, 2010 | 1995 Honda Accord
Feb 10, 2010 | 1995 Honda Accord
Dec 29, 2009 | 1995 Honda Accord
Dec 26, 2009 | 1998 Honda Accord
Aug 20, 2009 | 1995 Honda Accord
Jul 08, 2009 | 1995 Honda Accord
Jun 17, 2009 | 1985 Honda Accord
Sep 08, 2008 | 1995 Honda Accord
80 people viewed this question
Usually answered in minutes!