Question about 2002 Chrysler Sebring

1 Answer

2002 Chrysler Sebring Limited. My check engine light is on and when I had it checked for codes, it came up with a P0605, Powertrain Module. Would you tell me what the problem is and can I drive it? Thank you.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 57 Answers

Hello Normally this means the PCM will need replacing. In the USA I've heard that they are guaranteed for 8 years. If it's just gone past the date try and ask for a discount from Chrysler it's always worth a try! It's worth checking for any bad earths first or loose wires. Also get the alternator checked out as it could be dumping AC voltage. It's hard to say if it's still worth driving as depending on the problem it could do more damage or put you in a dangerous situation.Please can you leave some feedback. Thanks

Posted on May 27, 2011

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How can I replace a bad fuel module o-ring 2002 Sebring 2.7L v6

sorry dont think you will be able to check this link out he's the chrysler expert
How to Replace Fuel Pump in Chrysler Sebring eHow

Mar 29, 2014 | 2002 Chrysler Sebring

1 Answer


You'll probably need a mechanic for this.
Code 605 is for a problem with the ignition module. The module fires the coil. The module and wiring would need to be tested.

Jun 09, 2013 | 2002 Chrysler Sebring

2 Answers

What is tcm internal memory error. Check engine came on. Code is p0605

Transmission Control module; It is monitored when the ignition key is on. In short, the software has failed and does not match a calculated value. This is an internal fault that requires TCM replacement.

Aug 29, 2011 | 2001 Chrysler Sebring

2 Answers

Code p0605. 2006 f 150

Powertrain Definition: Internal Control Module Read Only Memory (ROM) Error P0605 FORD Description The ECM consists of a microcomputer and connectors for signal input and output and for power supply. The ECM controls the engine.
Most common cause of this code is a defective ECM (Electronic Control Module), in your year the part is known as the PCM (Powertrain control module)

Jan 27, 2011 | 2006 Ford F-150

1 Answer

On my 1998 crysler sebring I am getting OBD II codes of 40 and 41,Transmission & engine module,any suggestions where to start? Thanks.

code 40-
Possible causes - 1/1 And 2/1 O2 sensors harness circuit shorted
- 1/1 And 2/1 O2 sensors harness circuit connectors (wrong connection)
- Faulty Powertrain Control Module (PCM) P0040 CHRYSLER Description At ignition on the Powertrain Control Module (PCM) checks the voltage on the ground side of the O2 sensor harness connector. If voltage is higher than two volts the P0040 code will set. code 41- Possible causes - 1/2 And 2/2 O2 sensors harness circuit shorted
- 1/2 And 2/2 O2 sensors harness circuit connectors (wrong connection)
- Faulty Powertrain Control Module (PCM) P0041 CHRYSLER Description At ignition on the Powertrain Control Module (PCM) checks the voltage on the ground side of the O2 sensor harness connector. If voltage is higher than two volts the P0041 code will set.

Dec 01, 2010 | 1998 Chrysler Sebring

1 Answer

I took my 2002 chrysler sebring in for a tune-up today after it began flashing engine light and stalling on me today. What does the code p1698 mean?

The 1698 code means either that there is no digital data communication from the the transmission controller OR from the body controller that is being received at the powertrain control module. An analyzer that read "hex" codes would distinguish which, the former being a 60 the latter a 61 hex code.

Jul 19, 2010 | 2002 Chrysler Sebring

1 Answer

Where is the PCM located on a 2002 chrysler sebring?

The PCM (Powertrain Control Module) is the aluminum box with fins that is behind the left headlight and toward the engine a bit. It's about 12" long 6" high and 2" thick and runs lenghwise from front to back. The box right behind the headlight that is about 6x6x2 and runs side to side, is the TCM ( Transmission control Module).

Oct 25, 2009 | 2002 Chrysler Sebring

3 Answers

2002 chrysler sebring trouble codes P0605 and P0700. Is in limp mode with Check Engine Light

There is a TSB for this issue: It is in "limp" mode. It is not unusual for the Sebring - Should be covered by Chrysler.

TSB Number: 0801505

NHTSA Number: 10013731

Sep 17, 2009 | 2002 Chrysler Sebring

2 Answers

Check enginie light is on code that comes up is p1698 i have no idea what that means and my car seems to be ok


May 01, 2009 | 2000 Chrysler Sebring

Not finding what you are looking for?
2002 Chrysler Sebring Logo

402 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides