Question about Jeep Grand Cherokee

1 Answer

On my 2000 jeep grand cherokee information center is displaying perform service i would like to know what i have to do to fix it

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Jeep Master
  • 5,332 Answers

The perform service message tells you when you need to change oil. To reset it turn the key on and press the step button until miles to service is displayed (it should say 0 underneath). Then press and hold the reset button until it changes from 0 to 3,000 miles. Then start the vehicle. The message should no longer be displayed.

Posted on May 27, 2011

  • Sam Evans Feb 14, 2013

    My perform service light comes on every time I start my 2000 Jeep Grand Cherokee. Even though I have reset the service miles several times I can not figure out what is wrong. Does anyone have a different solution?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace heater climate control box on 2000 jeep grand Cherokee


working blind, no FSM sounds like it? factory service manual.
easter egg hunts,

climate control box.
the panel (control)
  1. Disconnect and isolate the negative battery cable.
  2. Remove the center bezel from the instrument panel and place it on a workbench.
  3. Remove the screws that secure the electronic vehicle information center (EVIC) control and the A/C-heater control to the center bezel and remove the controls.

or
the automatic control zone module, option? AXC its called
The AXCM it it.

you scanned it and the DTC logs prove it bad.
FSM qoutes
The AZC control module is capable of three different
types of self-diagnostic tests, as follows:
² Fault Code Tests
² Input Circuit Tests
² Output Circuit/Actuator Tests
The information that follows describes:
² How to read the self-diagnostic display
² How to enter the AZC control module self-diagnostic
test mode
² How to select the self-diagnostic test types
² How to perform the different tests
and
To enter the AZC self-diagnostic mode, perform the
following:
(1) Depress the A/C and Recirc buttons at the
same time and hold. Rotate the left temperature control
knob clockwise (CW) one detent.
(2) If you continue to hold the A/C and Recirc buttons
depressed, the AZC control module will perform
a Segment Test of the vacuum fluorescent (VF) display.
In the Segment Test you should see all of the
display segments illuminate as long as both buttons
are held. If a display segment fails to illuminate, the
vacuum fluorescent display is faulty and the heater-
A/C control must be replaced.
(3) After viewing the Segment Test, release the
A/C and Recirc buttons and the display will clear
momentarily. If a 0 is displayed, then no faults
are set in the system.

remove
find it,
unplug it
unscrew it
its out.


is it not inside this part?
http://www.ebay.ca/itm/99-02-Grand-Cherokee-WJ-AZC-Automatic-Zone-Control-Digital-Climate-AC-Heater-J/331385209420?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20140620075055%26meid%3Dc65ed9b0ea294f58ab9db96ebd916c19%26pid%3D100011%26rk%3D4%26rkt%3D10%26sd%3D321318868998

Mar 15, 2015 | 2000 Jeep Grand Cherokee Limited

1 Answer

What do i need to do when my jeep says perform service. i dont know what kind of service?


Usually means just an oil change. All other services are determined by the manual as far as transmission, transfer case and differential service intervals.

Jan 03, 2012 | 2000 Jeep Grand Cherokee

1 Answer

How do I re-set the "Perform Service" on my diagnostic center of my '94 Jeep Grand Cherokee?


Switch ignition on
Press and release lower button/right of display
Press and HOLD top button for at least 2 seconds
Switch ignition off

Feb 28, 2010 | 1998 Jeep Grand Cherokee

1 Answer

I cannot find the fuse box for the heated seats in my Jeep Grand Cherokee 2000. Also the "thing" that tells me when I need an oil change, which direction I'm going, etc. is no longer changing when I push...


The heated seat fuse is located in the junction block behind the left side of the dash. It is fuse number 20, a 10amp fuse. As for the driver information center not changing the display when you push the button, I believe this is a single unit and a relatively common issue ( I have a Grand Cherokee in my shop, for a different problem, and it is doing the same thing). My guess is that the entire info center needs to be replaced to fix the issue. Good luck!!

Jan 27, 2010 | 2000 Jeep Grand Cherokee

1 Answer

I am looking for a 1999 jeep grand cherokee owners manual to download


Jeep Grand Cherokee 1999-2004 also called WJ, about this model can check the information there: Jeep WJ 2000 Electrocnic Service Manual

Other details find in:
- Jeep Grand Cherokee WJ 2002 (all sections / spanish)
- WJ Jeep (several tips and DIY)

Good luck (remember rated this help).

Sep 02, 2009 | 1994 Jeep Grand Cherokee

1 Answer

The service 4wd switch light shows on the display sometimes


Check the information about VIC (Vehicle Information Center)in here: ZJ-Secc-8E-Instrument-Cluster-and-Gauges (Section 8E Page 11 and next)

Maybe is an reminder about service or maintenace time.

Good luck!!!

Jun 02, 2009 | 1994 Jeep Grand Cherokee

1 Answer

2001 jeep grand cherokee center console beeps perform service


You have to manually reset it. Press the step button until miles to service comes up, then press and hold reset.

May 07, 2009 | 2001 Jeep Grand Cherokee

1 Answer

Service 4wd switch


I have the same problem the switch is on the transfer case! what your talking about is your vehicale information center. the stupid thing sucks I also replaced it but it only comes on some times now. dont know!

Sep 10, 2008 | 1993 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

347 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...