Question about 1984 Ford Thunderbird

1 Answer

Need to remove door panel on 1984 thunderbird and this old man cant figure it out

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,510 Answers

To remove the door panel, remove any screws that are in the vicinity of pull handles and door pockets. These screws will be under little trim covers that you need to prise off to get to their heads. Look for the screws around the edge of the panel and also the screw in the latch release handle recess.
The lock knob, if there is one there, will have to be screwed off and then carefully work your way around the door, freeing the panel's clips from their holes in the door frame. (Doot panels are brittle and clip break out easily).
Finally the panel will probably have to be lifted out if the window slot. (If the panel does not come off, work out what is retaining it and remove that screw or slide it off the clip that is still holding the panel. Disconnect any electrical plugs behind the panel. Under the panel you will find a plastic dust sheet that is stuck to the door frame, remove this carefully, you will have to replace it before replacing the panel.

Posted on May 27, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

IM LOOKING FOR A IDLE SPEED SOLENOID FOR MY 1984 FORD THUNDERBIRD 5.0 LITER CAN YOU TELL ME WHERE I CAN FIND ONE A.S.A.P. THANK YOU


if you cant find one at a auto parts store or dealer. go to a local junk yard to see if they have one, its much cheaper then the dealer. but try a auto parts store first!

Aug 18, 2011 | 1984 Ford Thunderbird

1 Answer

Removing passenger side door panel on 2005 thunderbird


they are held in place with plastic push clips and simply remove the screws for the door handle inside the car as well as the window wires by popping out the panel and pull up from the bottom and remove just that way re-installation is reverse procedure you may need to use a pair of side cutters to remove any plastic clips that did not pop off with the panel and reinsert them into the proper holes

Sep 11, 2009 | 2005 Ford Thunderbird

1 Answer

Cant figure out how to remove the door panel to fix my door


After you have made sure that all the screws are out there are little christmas tree looking clips that hold the door paned on. Just pull out on the panel, then push up on the panel and release the top.

Jul 22, 2009 | 1990 Buick LeSabre

1 Answer

2003 ford thunderbird how do you remove inner door panel?


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Jun 12, 2009 | 2003 Ford Thunderbird

1 Answer

Accessing the speaker on driver side door panel.


You will have to remove the entire door cover. Remove any screws you can see, pop off the cover behind the door handle remove screws behind that, pop off the plastic that holds power window switches and unplug them, then you will have to pull the door panel upwards to remove.

Mar 27, 2009 | 1997 Ford Thunderbird LX

1 Answer

How to remove the door panel on a 96 Ford Thunderbird?


Carefully pull front door trim panel finish panel away from front door trim panel.
Disconnect wires from front door lock switches, outside rear view mirror controls and window regulator control switches, if equipped. Remove front door trim panel finish panel.
Remove front door trim panel retaining screw through front door trim panel finish panel opening.
Remove interior lamp lens cover.
Remove screw through interior lamp opening.
Slide front door trim panel upward to disengage hooks.
Rotate top of front door trim panel away from front door and lift bottom hooks from front door.
Disconnect window regulator jumper wire
Remove front door trim panel.

Feb 21, 2009 | 1996 Ford Thunderbird LX

1 Answer

Door panel 1984 camaro


Yes that whole plate needs to come off. Be careful as some of those torx heads are just for show and not actual screws. The door handle also needs to be removed. There are three screws for the handle, usually a torx head. The door panel will then unclip and with the window down you can push in and pull up gently on the upper door trim (hard plastic part) to release the door panel from the door.

Feb 09, 2009 | 1988 Toyota Pickup

1 Answer

How do you replace power window motor on a 1996 thunderbird?


Get to it and remove the door panel start at bottom popping the door panel loose with a flat blade working up both sides and remove screws in door handles some are hidden when all loose raise up on the door panel to release. then you will remove the plastic on the door and see the motor . it is rivited in so you will need a drill and some new rivets for replacement/

Jan 25, 2009 | 1996 Ford Thunderbird LX

1 Answer

1994 vw jetta drivers door window crank inside handle removal(man


You'll see a small ring on the inside of the crank where it meets the panel. That ring holds the crank in place. To remove the handle simple push the ring up and the handle will slide right off. Depending on the position of the crank the ring might have to be pushed up down or sideways. Hope that helps.

Jan 19, 2009 | 1997 Volkswagen Jetta

1 Answer

Door handle 1996 thunderbird


sounds like a plastic Sir clip of course you say external handel detached from door consider linkage clip has fallen down!

Dec 01, 2008 | 1996 Ford Thunderbird LX

Not finding what you are looking for?
Cars & Trucks Logo

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...