Question about Ford Super Duty

3 Answers

No marker lights - Super Duty Ford Cars & Trucks

Posted by on

  • 1 more comment 
  • claigaie May 27, 2011

    2005 ford f550. all fuses good. i have tail lites, brake lites turn signals and cab clearence lites. no power to any of the marker lites on the body. factory chassis cab harness has no power from front to back.

  • claigaie May 28, 2011

    Doesn't work.

  • claigaie May 31, 2011

    didn't help.

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,386 Answers

Hello and welcome to FixYa!

As a first course of action, I strongly suggest that you remove the positive battery connector. Let it sit for atleast 5mins. then reconnect it again. This will reset the system and can get it back to it's normal operation.

If the problem still persists, i strongly suggest that you clean the negative battery terminal and connector. It can be corroded and loosing body ground.

Hope this helps and thank you for using FixYa! Have a good one!

Posted on May 28, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 17,970 Answers

Wires broke in some place; first try to jump directly from battery at harnesses, if this test work, you'll need to check all wires.

Posted on May 27, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,530 Answers

Welcome to Fixya
First thing you need to check/inspect if there are blown fuse for marker lights. Check also if the bulb is OK. Please provide the brand/model of the vehicle.
Thank you for using Fixya!

Posted on May 27, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why would only one out of 4 marker lights work?


you are right all marker lights come off of one fuse, inside instrument panel, number 29, a 10 amp fuse my manual does not give a lamp number, it has a chart, head lamps (high) lamp 9005 60 w type a, headlamp (low) 9006 51 w type b, front marker lamps 5w type d, for the rear it says to use a lamp 7443 21.5 w type d, I do not use these, I have special lights on mine, hope that it helps

Mar 28, 2015 | 2007 Scion tC

2 Answers

2004 H2 HUMMER exterior lighting


check lighting relay and replace if necessary

Jul 07, 2008 | 2004 Hummer H2

1 Answer

Replace rear side marker light


I had this message sent to me to solve....THIS IS MY QUESTION THAT I ASKED....LOL....SINCE THEN; I'VE BEEN INFORMED THAT YOU HAVE TO GO THROUGH THE OUTSIDE TAIL-LIGHTS TO GET TO THE MARKERS
DOES ANYONE ELSE KNOW ANOTHER WAY?
I have stainless steel covers over my tail-lights and will have to remove the "adhesive" on the covers to remove the tail-lights...HELP!

Jul 05, 2014 | 2007 Chevrolet Corvette Convertible

1 Answer

Marker light replacement


you have to remove head light housing to replace marker light.look in owners manual in glove compartment it will show you how to remove head light housing to replace head light or marker bulb.

Jun 19, 2013 | Cars & Trucks

2 Answers

My rear marker/ running lights are out and i need to know how to get to them


Signal and Marker Lights Removal & Installation To Remove:
  1. Remove or disconnect the following:
    • Screw from the side marker lamp.
    • Side marker lamp from the front and/or rear bumper fascia.
    • Bulb/socket from the side marker lamp.
    • Bulb from the socket.
To Install:
  1. Install or connect the following:
    • Bulb to the socket.
    • Bulb/socket to the side marker lamp.
    • Side marker lamp to the front and/or rear bumper fascia.
    • Screw to the side marker lamp. Tighten to 2 N.m (18 lb in ).
prev.gif next.gif

Jan 08, 2011 | 2002 Pontiac Sunfire

1 Answer

Replace side marker light on lexus rx300


Remove 3 - 4 screws on fender cover close to side marker light. Pull fender cover out a bit for you to use your other hand to reach side marker light. By twisting on one direction and here you go the light out. Replace new bulb and replace everything on reverse order.

Jul 25, 2009 | 2000 Lexus RX 300

1 Answer

Had a problem with a right, amber side marker on right side


Usually one of the holes in the marker light where screw goes in, has metal contact where screw meets light, but if not, and they are not push in wire connection type from behind, then just run your white wire up through hole in housing, and bare the end & tighten it up under screw holding light to body. White should be ground, brown should be power.

Jul 02, 2009 | 2004 Dodge Ram 2500

3 Answers

Replace parking/marker bulb front pass 98 Jeep Grand Cherokee


look in between the marker and headlights its a screw there screw it out

Apr 04, 2009 | 1998 Jeep Grand Cherokee

1 Answer

How to change front driver side 2004 g35 coupe marker light


Just pop out the side marker from where the marker meets the fender well and push outward on the side marker. It has a metal clip retaining it to the bumper.

This entry was in January, most likely you figured it out already.

Jan 19, 2009 | 2004 Infiniti G35 Sport Coupe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75824 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...