Question about 1999 Daewoo Nubira

1 Answer

Key ingnition wont turn how to take out barrell from steering

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

Try turning the wheel and key at the same time

Posted on Aug 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The key wont unlock the steering wheel?


Take the barrel out usually a small hole in side of ignition barrel case push a pin screwdriver in and check that no bits have broken off the barrel inside the housing or have you tried pulling the steering to the side as turning the key sometimes they jam rock the wheel as you turn key hope that helps

Nov 09, 2016 | Cars & Trucks

1 Answer

Steering wheel is in locked position but the ingnition works fine.


Most probably something broken internally in the key barrel which keeps the column locked.

Nov 22, 2013 | 2002 Jeep Grand Cherokee

2 Answers

Key wont turn while in ignition


Change ignition barrel or get a new key cut try spraying lubricating oil down the barrel

Apr 20, 2013 | 2001 Buick Century

1 Answer

The key wont turn


With this year model it is most likely the key and lock barrel are both worn so they don't match anymore. Take the key to an auto locksmith and explain. He can cut another key with a little extra metal on the profile to get started, but most likely you will then need a new barrel and key fitted.

Jun 06, 2012 | 2001 Ford Ranger Regular Cab

1 Answer

KEY WONT TURN IN IGNITION


OK, obvious first: turn it the other way. Don't laugh, I've done this.

Otherwise, barrel is jammed. Get a new barrel, dismantle the steering column and replace the existing one. You'll now need two keys: one to unlock the car and one for the ignition. You won't be the first.

Apr 06, 2012 | 2001 Oldsmobile Intrigue

1 Answer

I have an Isuzu Rodeo and the key is stuck in the ignition any idea how to get it out? Year 2000


replace the whole ignition barrel with new key and get key programmed by dealer
can remove barrel and key by removing steering column covers turn ignition to on position and with small shank screw driver push in hole in outer top rear section of barrel assembly then pull out ignition lock barrel with key in it. fit new lock barrel and key, program new key into system and can get door lock barrels coded to suit new key or get code for old key and cut new key so it fits mechanical locks on the rest of the vehicle (just wont turn in ignition) 2 keys for vehicle.

Jun 13, 2010 | 2000 Isuzu Rodeo

1 Answer

How do you get a stearing colum unlock and the


hi if the problem is that the lock has locked and wont free when you try and turn the ignition on then what you should try is turning the steering wheel from left to right as hard as you can whilst you try turning the key, the problem is usually that the lock is under pressure from the tyres trying to turn the steering wheel so with this pressure on the lock the key just wont turn so you need to try and release this pressure so that the key will turn and unlock the lock.

so hold the steering wheel tight and turn it left using a bit of pressure whilst you keep trying to turn the key dont hold the key in the same possition as this wont free the lock keep turning the key on and off so that it resets and this should then allow the lock to free and you should be able to start your car, if turning the steering wheel left dont work then try right and repeat with the key on and off until the lock is off and the steering is free.

now it is going to be tight so you will need some force to turn the steering wheel as the force from the tyres will be quite alot so you will need to use force to work the steering wheel left and right whilst turning the key.

now if this still dont work then this will either mean you have a problem with the key or the actual ignition barrel has got a fault if this is the case then your going to need to get a new igniton barrel, the part the key goes into before the lock will free itself, all you need to do to remove the barrel is to remove the cover from the steering wheel surround and then you will see how the barrel comes out of its surround but dont do this until you have a new lock in case you forget how you got it apart.

the chances are the lock is just stuck and working the steering wheel left then right as far as you can will free it up if it dont then you can also try jacking the 2 front wheels off the floor like put the car on stands then try turning the steering left and right to unlock the ignition doing it this way releases the pressure from the tyres and should make it easier to unlock the steering.

let me know how you get on or if you need further assistance ok

May 23, 2010 | 1996 GMC Jimmy

1 Answer

The ingnition won't turn and the sterring wheel is not locked. what can i do?


ive had that happen before and usally if you move the steering wheel a little or flip the key over and try again it usally works the steering lock sometimes dosent line up and the key wont turn

Oct 24, 2009 | 2001 Toyota Corolla

1 Answer

How can I change the ingnition key cylinder on a 96 olds ciera?


You have to pull the steering wheel off, (with a steering wheel puller/installer) loosen the signal light control, and remove the lock screw that hold the ignition tumbler in. It is probably a torx head screw, and it will have a long unthreaded part below the threads .

Feb 22, 2009 | 1991 Oldsmobile Cutlass Ciera

1 Answer

Key stuck in ignition


Take the steering column cover off and tap/hit the ignition barrel with suitable tool (small hammer)while twisting on key.It may be enough to loosen it so key comes out.You will have to remove steering column cover to swap with replacment barrel anyway .Get someone to turn steering wheel while tapping/hitting barrel as it could be the steering column lock pin thats jamming.good luck.

Oct 31, 2008 | 1996 Ford Crown Victoria

Not finding what you are looking for?
1999 Daewoo Nubira Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...