Question about 2001 Ford Crown Victoria

2 Answers

All my gauges and even speedometer and odometer have stopped working on my 2001 crown victoria. Any advise? The kick panel above the brake pedal is loose and every now and then if I push up on the loose plate the gauges will respond momentarily but I cant find any loose or or disconnected wires.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 4,369 Answers

Sounds like an ignition switch issue. Radio out too? try rotating key back & forth a little when it's happening. report results.

Above the noise damper panel is you LCM, lighting control module. above steering column. But I don't think it affects gages & speedo.

The lighting control module (LCM) is a microprocessor based module that controls several vehicle subsystems. The LCM responds to electrical input signals from various switches, sensors, and external modules. The LCM is located under the LH side of the instrument panel. Subsystem functions of the LCM include headlamps with autolamps, turn signal lamps/hazard flasher lamps, cornering lamps, parking lamps, courtesy lamps, demand lamps, battery saver and control backlighting.

Posted on May 26, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 142 Answers

If you can kick the panel and it work, then there is a loose connection somewhere. Start at the fuse block and make sure you have a good connection there, then move forward.

Posted on May 26, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where where do i find the fuse for the speedometer on a 2001 Crown Vic


There are three fuse's for the instrument cluster , all located in the central junction box (fuse panel ) inside the vehicle ,under the dash !
Fuse # 14 a 10 amp , fuse # 23 15amp. and #6 15amp . Look behind right and left kick panel . But i don't think this is a fuse problem , gauge itself could be bad .

Dec 09, 2016 | 2001 Ford Crown Victoria

1 Answer

My 2001 ford crown victoria wont come out of park


Check your brake lights, if they don\'t work the interlocking system will not let you shift from park. If brake lights don\'t work probably the brake lamp switch on the pedal shaft. Check power in and out of switch when stepping on pedal, if nothing coming out, swi

May 25, 2014 | 1999 Ford Crown Victoria

1 Answer

How to change 2001 crown victoria brake pads


Jack up car, remove the wheels, take out the two retaing bolts on the brake caliber, slide caliber up off brake disc, remove old brake pad, use a C-Clamp or big pair of Channel locks to compress the piston in to the brake caliber, Insert new brake pads onto caliber, slide brake caliber back over brake disc, reinstall the 2 retaining bolts. put tire back on. Repeat this till you have replaced all pads that you are going to change. ***Caution.. Before putting the car in gear, crank it up and pump the brake pedal till you have a firm brake pedal. If you fell to do this you will have no brakes due to the pistons on the calibers are compressed and are not seated on the discs.

Jan 08, 2011 | 2001 Ford Crown Victoria

1 Answer

1992 crown victoria speedometer works odometer does not work .


This is an internal issue and the speedometer must be removed and repaired. There are people who still do this and can rebuild your old unit. Look in your area or there may be places to ship it to. Local salavage yards may have it if down time is an issue. Be sure to save the receipt in the car so that actuall mileage can be verified.

Nov 08, 2010 | 1992 Ford Crown Victoria

1 Answer

Looking for fuse box locations for 2001 crown victoria


Driver interior next to the brake pedal and under the hood next to the battery.

Aug 14, 2010 | 2001 Ford Crown Victoria

2 Answers

Insrument panel loses power periodically


this is just a loose fuse or connector wiggle the connector of the lighting control module just above you gas pedal under the dash.turn lights on try to kick slightly the module(black metal box).Sometimes you need to open it and re apply heat and solder on the relay terminals fixed on the board.

Feb 01, 2010 | 2006 Ford Crown Victoria

1 Answer

Speedometer runs but odometer dont; on 1993 Crown Victoria


Sounds like the speedometer head itself has failed or is in the process of doing so. While it may be possible to obtain just a speedometer head it would be far easier and probably cheaper to go down to the local salvage yard and get yourself a whole new instrument cluster. Many times they will come with instructions for resetting the mileage to match your car, if it doesn't, just attach a drill to the connection point for the speedometer cable and run the drill until it has the right mileage.

Oct 10, 2009 | 1992 Ford Crown Victoria

1 Answer

ODOMETER CEASED WORKING ABOUT A MONTH AGO (66,667) MILES SPEEDOMETER IS W0RKING FINE. WHAT REPAIR WORK DO I NEED.? DOUG 1992 CROWN VICTORIA


U will need to pull the speedo head out and send it in for repair, there are no parts availiable to the consumer, only authorized Ford repair stations, that is not the dealer, check the internet, I use DNA speedometers.com

Mar 25, 2009 | 1992 Ford Crown Victoria

2 Answers

2001 crown victoria


You need a new BRAKE PEDAL SWITCH

Aug 10, 2008 | 2001 Ford Crown Victoria

Not finding what you are looking for?
2001 Ford Crown Victoria Logo

417 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...