Question about 1986 Chrysler New Yorker

Open Question

Hi, the speedometer will not engage, 1986 chrysler new yorker electronic dash unit. I checked all grounds under the hood and trunk and cleeaned them. I changed out the pull out light switch, in the dash becuse it goes dim and turns off the radio light, I have to rotate the swithch to make it bright.. I even changed out the electronic dash unit. and still no speed reading. I changed the speed pick up unit in the transmission

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

short shadey
  • 421 Answers

SOURCE: Have a 1986 Chrysler New

you may try draining the fluid and replacing the filter check the pan for metal deposits and if none reinstall new fluid with Lucas transmission additive at a ratio of 50% it sounds like your valve body or internal pump is leaking pressure due to a worn seal and this lucas treatment should help for a while, if not you a least tried before sourcing a new or rebuilt trans axle good luck and please rate- Jeff

Posted on Sep 18, 2008

tripletauto
  • 1450 Answers

SOURCE: 1993 Chrysler New Yorker 5th Ave No Head lights

hope our chat fixes

Posted on Oct 03, 2008

  • 295 Answers

SOURCE: 1991 chrysler new yorker salon. transmission slipping

The over drive band is damage inside or the valve body has to be repaired, I would take to the transmission shop. The transmission is going to have to be repaired internally

Posted on Mar 22, 2009

yotaguy
  • 232 Answers

SOURCE: I have a 1986 chrysler

Space 12 is a 3 amp and 13 is a 5 amp,12 is for your dash lights

Posted on Apr 13, 2009

Hightower971
  • 183 Answers

SOURCE: 2005 Chrysler town & country touring won't turn over.

Sounds like you need a starter, or you have a loose wire somewhere under the hood.

Posted on Apr 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is ecu located


Hi Stacy:On 1992 Chrysler New Yorker 3.3L FI 6cyl the Engine Control Computer is located: under hood, driver side, front engine area, rear of headlight housing, mounted on fenderwell.
Hope this helps.

Mar 12, 2012 | 1992 Chrysler New Yorker

2 Answers

I have no brake lights in my 1989 chrysler new yorker but have every other lights whats the problem?


Check the stop light switch down by the brake pedal. there's 2 wires going to the switch. when the pedal is pressed the little button on the switch comes out and causes the brake lights to come on. Try unplugging it and putting a jumper wire in the plug to complete the circuit. Second guess: if the car is rusted, check the wires in the trunk above the wheels.

Dec 02, 2010 | 1989 Chrysler New Yorker

1 Answer

The dash vents in my Chrysler new yorker do not blow air - when i turn air or heat on lower and defrosters work fine but no air comes out of the vents on the dah boards


check the vacuum lines. plastic lines break. one line goes into the fire wall. then there are several lines coming from the control panel. sometimes the plug comes loose

Jun 14, 2010 | 1986 Chrysler New Yorker

1 Answer

2001 dodge caravan speedometer not working signal not working


Hello. I can assist you. Push in and hold the trip odometer in for over ten seconds until the dash begins to go through what appears to be a self test. This will reset the speedometer. Thanks for using fixya!

Nov 18, 2009 | 1986 Chrysler New Yorker

1 Answer

The electronic speedometer, fuel guage and odometer are not lighting up and all the fuses are good. They were all working until the battery went dead and the car had to be boosted. What could this be?


after a car is being jumped it could affect many sensitives electrical components. this battery jump might have blown out the l.e.d lights on the dashboard

Nov 05, 2009 | 1986 Chrysler New Yorker

1 Answer

Where is the voltage regulator on a 1986 new yorker 2.2 turbo i,ve checked all over under the hood with no luck should,nt it be on the passengers side wall,thanks in advance,gary.


chrystler had a rash of vechiles that they used the ecm as the voltage regulator, if this is the case and your new altenator is not charging then you can install a diode pack obtainable at your local parts store. it could also have an internally regulated altenator.

Oct 09, 2009 | 1986 Chrysler New Yorker

2 Answers

1990 Chrysler New Yorker cooling fan no power


Open the drivers door pull the end off of the dashboard and check fuses for heater fan

Apr 06, 2009 | 1990 Chrysler New Yorker

2 Answers

Cant find OBD port on a 1994 Chrysler Newyorker


it under the dash on drivers side right in front of the gas pedal its blue with 6 plug in ports its the only one there

Mar 17, 2009 | 1994 Chrysler New Yorker

3 Answers

Electrical glich in 1993 Chrysler New Yorker


Have your computer in the car checked. Happend to me in a 94 Corsica.

Jan 20, 2009 | 1993 Chrysler New Yorker

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...