Question about 2003 Mitsubishi Galant

2 Answers

We lost the remolt control and now the alarm is going off,ihad to disconnect the battery,now every time i connect the battery the alarm is going off

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How much is the alarm

Posted on May 27, 2015

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 131 Answers

You need to find the remote. Once you do,you can use it to turn off the alarm by pressing the unlock button. You can also try pressing the unlock button on the door panel but, I don't know if that will work. You might have to have another remote programed for the vehicle. You can also try putting the key in the door lock and unlocking it.

Posted on May 27, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want to locate the fuse for the alarm on my 2002 streetka. It has run down the battery and I cannot charge it without the alarm going off when I connect the battery chargers. Help please !! Thx


Turn the alarm off with the remote. The alarm is programmed to go on when power is restored, if power was lost (dead battery, disconnecting cables, etc.).

Feb 06, 2016 | Cars & Trucks

2 Answers

92 Toyota 4runner truck was running perfectly fine Later in the day went to start and the alarm just started going off and wouldn't turn off. Truck won't start even with keys turned in igniti


The alarm system somehow got activated , this is usually because the battery becomes discharged or disconnected try doing this:
Remove the key from the ignition
disconnect the negative battery terminal
put the key back in and turn to ON
exit the truck and leave door open
reconnect the battery terminal
get in and leave door open, if the alarm horn stays off it should start.

Dec 07, 2012 | 1992 Toyota 4Runner

1 Answer

My alarm keeps goin off when i connect my battery on my corsa sport r reg


When yo disconnected the battery, it set the alarm. If you have a remote control key fob, go ahead and connect the battery. Using the key fob, turn the alarm on then off. If that doesn't work, use the ignition key in the drivers door lock, turn the key all the way to the left, then all the way to the right. This should shut the alarm off. If it still won't go off, look for a reset button under the driver side dash. Hold the button down until the alarm beeps once. If you can't find a reset button, and nothing you've tried will turn the alarm off, you will need to seek help from a dealership, or a shop that specializes in alarms.

Feb 10, 2011 | Ford Escort Cars & Trucks

1 Answer

I lost the keyless remotes for a 1994 xj6. The battery died. Have charged the the battery. The Alarm activates as soon as the battery is connected. Turning the security switch in the off position and...


If the engine will start, and the car is drivable, find the alarm and disconnect it until such time as you can get to a repair shop. If disconnecting the alarm kills the engine, then use a jumper wire to bypass it. If the car won't start because of the security system, I'm afraid you will have to have it towed to a dealership or repair facility to disarm it.

Jan 03, 2011 | 1994 Jaguar XJ6

1 Answer

Can i by bypass my car alram


The car alarm on your 2000 Windstar minivan is wired into your van's battery. When you are making a repair to your car such as a battery change out your alarm can go off. You can easily disable the Windstar's car alarm by disconnecting the battery from the alarm. The battery is connected to the Windstar battery's negative terminal. Disconnecting the terminal from the battery will disable the alarm.

  • Socket wrench
  1. 1 Raise the hood of the Windstar to gain access to the battery.
  2. 2 Loosen the negative battery terminal labeled with a "-" with a socket wrench.
  3. 3 Disconnect the terminal from the battery to disable the alarm system.



Dec 12, 2010 | 1999 Ford Windstar

1 Answer

I installed a new battery on my 95 vw golf, however when I connect the terminals the alarm sounds on the car. How do I install it without the alarm sounding?


just connect the terminals,and wait till the alarm stops(30secs)then UNLOCK/HOLD KEY OVER 30 secs,windows go down.then lock/hold key over,windows go up.then press remote unlock button for 30 secs,you have just reset the alarm system/central locking/window comfort facility.....has to be done EVERY time you disconnect battery........

Nov 08, 2010 | 1995 Volkswagen Golf

2 Answers

I have a 1993 Toyota 4Runner. I changed the bulb in the headlight and disconnected the battery. When I reconnected the battery the alarm went off. I do not have the alarm remote to disarm the system. ...


look in the fuse box and if iam not mistaken you can remove a fuse which will shut it up on these older vehicles,or re connect battery and try to open and close door three times then put the key in ignition quickmanother trick i done with my jag when the fob fell of the keyring ans i thought i had lost it was to put the key in ignition and turn ignition on and after third attempt to start the alarm stopped and car started after it recognised the chipp in the key

Aug 29, 2010 | Toyota 4Runner Cars & Trucks

1 Answer

Remote not working after disconnecting battery


If car Convenience Control Module(module that control key remote) lose power- remote adaptation to the car will be lost. This apply to some Audi models.
What you can try to do is:
1. Disarm alarm manually by opening door lock with the key
2. Put key into ignition and turn to on position (don't start the car)
3. Press few times remote button (with the ignition in on position)
Depends on your year model it my work (works on the newer models), if not you have to go to the dealership to program your keys.
Good luck!
Grzesiek

May 11, 2009 | 2003 Audi A4 Cabriolet

2 Answers

After market auto alarm will not reset


Hi..
Is there 2 options to replace the Battery in your vehicle.
If you Don't have the REMOTE CONTROL.

1-- try to locate the VALET Switch. is used to activate and deactivate the Alarm.
Normally is located Near the Fuse box panel Inside of the car.
and some times on Left kick panel.
If you found the switch. Connect the new Battery and go inside of the car Turn the Key to ON position and Push ( Move the lever up or down) of the VALET switch.
Them try to start.

2-- Just With the BATTERY disconnected .
Go inside of the car And turn the Ignition Key to ON position leave it.
Now connect the Battery and the Alrm will NOT activate.
Go inside and try to start.
And Letme know.

I hope this help on your problem.
Thank you for use fixya...

Sep 15, 2008 | 1997 Chevrolet K1500

Not finding what you are looking for?
2003 Mitsubishi Galant Logo

319 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...