Question about 1999 Dodge Dakota
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
hi..the transaxle converter clutch . tcc. uses a solenoid -operated valve located in the automatic transaxle to mechanically couple the engine flywheel to the output shaft of the transmission through the torque converter.that reduces the slippage loss in the converter.reducing emissions.but check the vss first.which is called the vehicle speed sensor.they both work together .if the vss is not working right it wont call on the tcc.
check this out..
Posted on Mar 06, 2009
follow the upper radiator hose to the engine, drain about 1/2 gallon of coolant and then pull upper hose off at the engine, look inside the metal large nipple, that is the thermostat.
Posted on Apr 01, 2009
To change the sparks on a 2005 4.7L Dodge Dakota you will need the following:
Note you will have to remove the air intake located at the top of the engine, and will have to move some of the coolant lines out of the way.
At the top of the engine there are 4 sparks on each side. The coils are held in place with a 10mm bolt. Undo the 10mm bolt and unclip the coil. Next pull out the coil.
Insert the socket, with extension into the spark plug hole.
Remove spark plug.
Check the gap on new spark plug, it should match stock.
tighten to approximately 25ft.lbs. (check spark-plug packaging for exact torque requirements).
repeat this process with all other sparks.
be sure that no dirt gets into the spark plug holes.
Posted on May 11, 2009
I had the same code on my 2001 dodge 2500. The truck wouldn't shift from 3-4. I pulled the trans pan off and replaced a broken spring ($2.00). It is behind a thin plate with 3-4 small torq screws. You don't have to remove the valvebody. Only took me 45 minutes to fix.
I would like to give thanks to Jeff Russel from Teal automotive. He said this is a very common problem. He sells any part for any automatic Transmision and his prices are very affordable.
Here is a link to the website.
Hope this helps.
Posted on Jul 19, 2009
Tips for a great answer:
Feb 26, 2016 | Mercury Cars & Trucks
May 14, 2014 | 2004 Chevrolet TrailBlazer
Apr 08, 2013 | 1997 Dodge Dakota
Jul 23, 2010 | 2005 Dodge Dakota
Jun 19, 2010 | 1997 Dodge Dakota
May 30, 2010 | 2004 Dodge Dakota
May 04, 2010 | 1995 Chevrolet Beretta
Nov 22, 2009 | 2002 Dodge Neon
Oct 05, 2009 | 1997 Dodge Neon
Feb 26, 2009 | 1998 Dodge Dakota
357 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: