Question about 2008 Dodge Charger

1 Answer

I have an SLR chip for my 6.1 HEMI but I can't identify the wires I need to connect it to. Only two wires are involved; air tempurature and mass air.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,702 Answers

You need the dark blue/ light green wire at the air temperature sensor it is pin # 31 at the PCM ( power control module ) and there is no mass air flow sensor on the 6.1L it has a MAP ( manifold absolute pressure ) sensor and you will need the violet/brown wire at the sensor pin #23 at the PCM.

let me know if there is any thing else you need.

Posted on May 26, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mass airflow sensor location on Chrysler Aspen 2008 hemi 5.7L


That should be in the intake air right after the air filter box in tube to throttle body. Has wires attached to it's connector.

May 20, 2017 | Chrysler Cars & Trucks

1 Answer

I have a 2008 Pontiac G5 I was wanting to install a performance chip to it. It says to connect it to the IAT senor which has 5wires witch wires are for the IAT


The other three wires are for the Mass air flow sensor . That's a new one for me , performance chips or turners are used through the DLC . You program the engine computer . I have no idea what they can do from the intake air temp. sensor .The tan an lit blue wires are for the IAT sensor !

Oct 15, 2015 | Pontiac Cars & Trucks

1 Answer

04 DODGE Ram hemi cylinder 3 misfire


Check engine compression and compare. then test running engine compression most engines have about 130-170 cranking compression and about 90-110 running compression. OR bring that cylinder to its Top Dead Center compression stroke apply air to the cylinder and check to see where the air is going open throttle plate bad intake valve, from exhaust pipe bad exhaust valve, from oil cap piston rings.

Mar 23, 2014 | 2004 Dodge Ram 1500

1 Answer

Location of IAT/ MAF Sensor on 1998 5.9 Dodge Ram 4x4 and wire color code


the chip system from Gforce is more then just a resister...it is a programmable chip and resistors and Diodes and more...they have come along way since the first ones they built...

Jul 16, 2012 | 1998 Dodge Ram 1500 4WD

1 Answer

I have a 2000 VW GTI VR6.I'm trying to connect a performince chip


do not cut into these wires. any real performance programmer will not require you to do this. these ones that tell you to cut into the IAT will ruin a $700 mass air flow meter, and do not do anything. all they do is try to trick the computer into thinking it is colder then it actually is, and to richen the fuel mixture, which will actually HURT performance and emissions because the air density does not match what the temp sensor is reading. the temp sensor is there for a reason!

Jun 05, 2010 | 2000 Volkswagen GTI

1 Answer

IAT sensor on 2001 chevy silvrado 2500hd 6.0 L need location


The iat looks like the mass air flow its a hard plastic cylinder that connects to the intake tube after the air cleaner

Sep 20, 2009 | 2003 Ford Ranger Regular Cab

3 Answers

Which 2 wires is The IAT on 2007 Silverado


The intake air temp sensor is the one that is not the mass air flow. It should be a little 2 wire sensor in the inlet tube. The mass air flow is near the air cleaner, and is inline with the air inlet tube.

Jul 22, 2009 | 2004 Chevrolet Silverado 1500 Crew Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...