Question about 1994 Chevrolet Corsica

1 Answer

How to install a serpentine belt for a 1994 chevy corsica

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 100 Answers

Hi, to replace the serpentine belt is a bit of work, but not really that hard. You will need to take off the right front tire. Once the tire is off, you will see a "panel" with screws on it..4 or 5 i think. You will need to remove this. You will need to unhook the cables from your battery, then loosen up your alternator. You will need to take off the top motor mount. There are 2 bolts holding it to the right fender well at right top. and I beleive 3 bolts holding it to the motor mount support. You will notice a bracket right under your alternator. 2 bolts you can reach from the top, 1 bolt you will need to go up under from the bottom. There should be a "window" just to the back of where your tire goes where you can reach through to get the last bolt to the bracket. Use a wrench to raise the tension bar up, and then the belt will slip right off.

Posted on May 26, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Can I bypass the AC unit on my 1991 Chevy Corsica by putting a serpentine belt on for the car without AC?

they do not make a separate belt for NON AC belt, there is just one belt, the cars without the AC have a AC bypass pulley installed where the AC pump sits, u can buy a bypass pulley from a company called DORMAN, they sell their parts through most better retail auto parts stores like Napa and Carquest.

Oct 29, 2010 | 1991 Chevrolet Corsica

1 Answer

I'm replacing the drive belt "fan belt" on a 1995 chevy. corsica and need to adjust the tension

Apply tension to the belt until it is snug and has a live spring action when stuck with the hand dead center. For a more accurate deflection measure the distance from pulley to pulley and use 1/64th inch deflection per inch of belt length. For instance a 32" belt would require a deflection of 32/64" or 1/2". But saying all this I am confused. Your 1995 Corsica does not have a fan belt. The fan is electric. You car also has a serpentine belt which is self tensioning and not adjustable.

Oct 05, 2010 | 1995 Chevrolet Corsica

2 Answers

How do i install sepintine belt on a 3.1 chvy

no just slide it inward toward the block on the adjusting rail,after loosening the bolts.

May 31, 2010 | 1995 Chevrolet Corsica

1 Answer

Need a fan belt diagram for a 1994 Chevy 3500 pickup

WikiAnswers says you should be able to obtain a diagram from your local parts store.

Mar 23, 2010 | 1994 Chevrolet C/K 3500

1 Answer

Routing diagram for a Chevy G20 serpentine belt?

Okay, there are a few engines that come in this van, lucky there the same except,they come with or without ac or airpump, so i will give you all of them and you choose the right one.a613984.gif492790a.giffd1ae03.gif47b4a5f.gif

Mar 14, 2010 | 1994 Chevrolet G20

2 Answers

How do you change alternator on 1991 chevy corsica?

You have to take the serpentine belt off first, and then its just a bolt here and there and you'll have the old one out. They're a pain.

Jan 11, 2010 | 1991 Chevrolet Corsica

1 Answer

Looking for a diagram for serpentine belt placement for 1989 chevy corsica 2.0 liter

Go to the web site below. (copy and paste the address into your browser).!OpenDocument

Above the photo are 2 PDF documents. The first - Routing Guide gives you the diagram code for the car and engine. See page 30 for the 89 CHEV Corsica 2 liter.
There are 2 belts - one for the air conditioned equipped engine (diagram 6-3) and one without the aircon (diagram 5.3).

Next go to the second document - Illustration guide PDF document - for those 2 belt diagrams.

- Voluntary contributor.

Dec 15, 2009 | 1989 Chevrolet Corsica

1 Answer

Installing water pump for 1994 chevy van g20

remove serpentine belt,basically remove every thing in the way, WHAT ENGINE?

Sep 19, 2009 | 1994 Chevrolet G20

1 Answer

Serpentine belt replacement 1994 chevt silverado 5.7 lt

call your local autozone and the will tell you over the phone or fax you a copy

Feb 14, 2009 | 1990 Chevrolet K1500

Not finding what you are looking for?
1994 Chevrolet Corsica Logo

421 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides