Question about 2000 Toyota Camry

1 Answer

Wher are the scews to remove the cover on your back window of a 2000 camry ,because the lights are out

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Toyota Master
  • 2,044 Answers

Accessed through the Trunk

Posted on May 26, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Headlight assembly replacment on a 2000 toyota camry


the operators guide covers this"lost that", so does the FSM book.
why do you need a video? why search your self on youtube?
not the bulb , the whole thing, got you.

FSM, quotes. (alldata.com has this too, )
5 steps there with 1 photo.
  1. Before servicing the vehicle, refer to the precautions.
  2. Remove engine under cover.
  3. Remove front fender liner.
  4. Remove front bumper cover.
  5. Remove headlamp.assy.
  6. Remove the bolts. (2 screws in plain site)
  7. Disconnect the connectors.
  8. Pull out the headlight unit forward.
  9. Remove the headlight assembly.
buy the book, and not be helpless.
or login to alldata.com and look, at any time.

25308908-0vf2kckqkaixuxskxgql05cf-5-0.gif

why need a video, when all cars have books.?

Dec 05, 2014 | 2000 Toyota Camry

1 Answer

2000 toyota camry back window brake light is out how to change


Brake window light assembly just clicks off rear dash. IMPORTANT>Replace bulb from Toyota dealer or else brakelight warning light in dash will come on. Something to do with the proper ohms.

Nov 08, 2011 | 2000 Toyota Camry

1 Answer

Replace rear light bulbs in window 2000 camry


Pull the carpet back against the vertical right behind the light. There is wires going through the metal. There are 4 10mm nuts that have to be removed to gain access to the rear of the light. Once you remove those 4 nuts, pull the light out and replace the Specif Light you need.

Note: Test before re-installation

May 26, 2011 | 2000 Toyota Camry

1 Answer

Install motor/regulator to 2000 camry solara


It easy ! You need a philips2_bing.gif and flat screw driver,8" X 4" block of wood and a needle nose pliar.
Use flat screw driver and pry out the two or three dust covers for the arm rest screws then use philips and remove the screws. Next use the flat screw driver and pry out the black plastic mirror cover from the inside of the door. Pry out the switch panel ( aka master switch panel) with the flat screw driver and disconnect it. On the side of the door panel just above the striker is this plastic push pull typeof a hold in screw. Use flat screw driver to get it to move a little then pull it out with the needle nose. Depending on which door your doing if you have a map folder ( driver or front passenger door) in the door there are two more screw to remove on the bottom of the door.
Now the inside door handle is tricky it comes out in two pieces. Use philips and get the only hold down screw you see out.( you may have to pry out al ittle screw cover first) Now the handle cover is removed by placeing the flat screw driver on the rear of the outside of the cover top and on the outside rear bottom to release the tangs that are holding it onto the panel.Pry it out lightly you may have to place the screw driver over the top of the door release button and pry that way. Don't loose your cool its a pain but it will fall out. Once its removed unhook the panel.

Next lift the plastic cover and remove the six gold2_bing.gif bolts first(For motor and regulator) Then push the window down till you see the two bolts holding the window to the regulator .Remove them, BEFORE YOU PULL OUT THE MOTOR AND REGULATOR YOU WILL SEE TWO TANGS THAT HELP HOLD THE REGULATOR AND MOTOR TO THE DOOR MARK THE RELOCATION , NOW pull out the motor and regulator have an assistant hold up the glass while you place the two blocks of wood to hold up the window. Now order your regulator and installation is in reverse. Good luck kate. Keep me posted.
Comments:

Apr 21, 2010 | 2000 Toyota Camry Solara

1 Answer

Dash lights to speed odometer and a/c are out. check but could not find blown fuse. what could it be?


probably the light bulbs.the one in the heater control is extemely small,i had a hard time with the chevy dealer locating this bulb in his parts fish but it was there. the dash cluster will have to be removed to get at the dash light bulbs.the scews holding the dash cover on are not to difficult to locate. the upper ones are in the top kind of inside the area under the dash top pointing uppward the lower ones you may have to remove they cover under the botoom by pulling it toward you but look for scews allong the bottom of it.

Feb 19, 2010 | 2000 Chevrolet Silverado 1500

1 Answer

I have a 2000 Jeep Grand Cherokee. My problem is that when the engine is ON my left brake light WILL NOT light up when the brake is applied... BUT when the engine is OFF, and the brake is applied, the...


the only thing that should separate the right and left brake light is the turn signal switch i think if tis vehicle has seperate light bulbs for the turn signals and brake lights it will not involve the turn signal swicth. either way ther is a voltage loss somewhere. test with a voltmeter at the brake light switch with the engine on and off,if it is vastly deferent go back to the fuze and ceck both sides of that,then back to the ignition switch.you should probably locate a wiring diagram.if the brake light and turn signals are the same bulbs you will need to ceck the turn signal switcth.this is removeable after taking off the plastic cover behind the steering wheel and held on by two scews very small torx head scews.it is referd to as a combination switch.

Feb 19, 2010 | 2000 Jeep Grand Cherokee

1 Answer

On my 2000 camry the rear warning light came on. I checked the lights and they're working. What could be wrong?


3 things. 1st remove the bulb from the 3rd brake light and see if there is any black in the glass. If so, replace it. If not check your other stop lights bulbs for the same.
2nd. Check the wires on the drivers side trunk hinge to see if any are broken and repair if necessary
3rd. You may have a bad light warning module located in the trunk on the drivers side rear quarter panel behind the covering.

May 14, 2009 | 2000 Toyota Camry

1 Answer

How to reset rear light out indicator lamp


There is no "reset" for the rear lamp failure system. The light goes out automatically wehen all of the rear lamps (brake and tail) are working. Did you check the brake light in the lower part of the back window? Also note that the lamp sensor is very sensitive; it needs to see all the bulbs to be the same wattage. The wattages can vary from nfgr to mfgr. Let me know waht you find on the 3rd brake lamp in the back window.

Jan 11, 2009 | 2000 Toyota Camry

1 Answer

2000 olsmobile alero


open the door. look for securing screws that holds the door panel. usually in the handle bar, in the door opener and the clips at the bottom part of the panel. then the window riser if you have one, needs to come out first too. some scews are covered so look closely.

tnx 4 using fixya,

drcool

Oct 24, 2008 | 2003 Oldsmobile Alero

Not finding what you are looking for?
2000 Toyota Camry Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...