Question about 2007 Ford Freestar Limited Minivan

1 Answer

How to change the #3 coil pak in a 2007 ford freestar

Posted by on

1 Answer

You unplug the coils wire connector

Remove 1 bolt holding the coil
Should be 7mm or close to that

The coil should be about $70.00
at parts store

Only change it ,if you got a PO303
Code. The last # is the cylinder

Don't be supprised if that isn't the bad
coil. If you have problems I will walk you
thru how to move a new coil to the bad
cyl ,without all the test equip the pros have

Usually the #3 will be on the engines right
or pass side at the back,on a V6

If your engine is transverse it will be
next to the dash or firewall. I don't
have all that off the top of my head

Posted on May 26, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change plugs and coil pack on 2005 ford freestar 3.9 engine


The coil is in the rear of the engine and the plug wires are all connected through a plastic housing in the front of the engine

Oct 15, 2014 | 2007 Ford Freestar Limited Minivan

1 Answer

Where is the location of the coil pack on a 2007 freestar van


It should be on top of the engine, and you should be able to follow the plug wires.

Mar 08, 2013 | 2007 Ford Freestar Limited Minivan

1 Answer

2004 f0rd freestar 3.9 engine it still runs slugish... i have changed 1. spark plugs 2. ignition wires 3. ignition coil 4. sprayed wire dry on harnesses and ignition wires and coil the van still...


O2 sensors get changed at 100,000 miles
Has that been done?

Has the TPS Sensor been tested with a scan tool
or oscilloscope?

Have you cleaned the MAF Sensor

All these items should be part of your preventative
maintenance,just as spark plugs

There is no need what so ever to change wires or coil,
unless they are tested & fail a test

Sep 20, 2011 | 2004 Ford Freestar

1 Answer

I have a 2007 ford freestar minivan. My van is chugging I changed the spark plugs, fuel filter, air filter, oil change and its still chugging. The engine light went on that said to change spark plug #2,...


I have the same problem few days ago and found my solution on Fixya Expert Sources website. Here you will get all the top sources of your problem. All the sources of this site provided by top Fixya Gurus. Have a good look at the sources of the page. Go through the sources to find your solution. Hope it will help.


View Count:2

Aug 11, 2011 | 2007 Ford Freestar Limited Minivan

2 Answers

Replace spark plugs on a ford freestar


I have a 2004 ford freestar and it's missing a lot I changed the spark plugs and fuel filter. what else can I do ?

Apr 02, 2010 | 2004 Ford Freestar

1 Answer

Fuel filter repacement 2007 freestar


  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02 .
  1. Release the fuel system pressure. For additional information, refer to Section 310-00 .
  1. Disconnect the battery ground cable. For additional information, refer to Section 414-01 .
  1. Disconnect the 3 fuel tube-to-fuel filter quick connect couplings. For additional information, refer to Section 310-00 .
Disconnect the quick connect coupling from the tube.
  • Press the quick connect coupling release button and separate the quick connect coupling from the tube.
  1. Remove the 2 fuel filter shield pin-type retainers and the fuel filter shield.
  1. Remove the fuel filter assembly.
  1. To install, reverse the removal procedure.

Apr 08, 2009 | 2007 Ford Freestar Limited Minivan

Not finding what you are looking for?
2007 Ford Freestar Limited Minivan Logo

243 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...