Question about Toyota Land Cruiser

2 Answers

Trying to turn motor over has been under water for 3 days. Than has been standing at a yard for a further 2 months. Is there any tips or ideas on how to crank it over. I have removed glow plugs and tryed to pull with a second vehical to work the motor.There was about 10 litres of water in the sump.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 106 Answers

Bad luck... Try:
1. Dry all electrical connections, fuses, sensors
2. Change all engine fluids (oil, coolant)
3. Spray some oil (50ml) to each cylinder
4. Pull the your car with other vehicle
5. Reinsert spark plugs
6. Try to start it

Think the main problem would be not the engine itself, but all electronics (especially sensors like maf and ECU)

Posted on May 26, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Toyota Master
  • 1,049 Answers

Here are some technical informations,hope that can help you.

Posted on May 26, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Compression


The head on the motor you bought is bad; or the head gasket is leaking; or the rings in the 2 center pistons are bad. 30 lbs is far too low of a compression, and 5 lbs is garbage. They should be closer to 80 or 90 psi and not have more that 5% variance between the cylinders.
The first thing you will have to do is pull the head off and check it. Or you can take it back to the salvage yard you got it from, show them the results from the compression test and either get another motor, or have them refund your money.

Mar 08, 2015 | 2006 Chevrolet Malibu

Tip

Replacing a blower motor in a 04-08 Suzuki Forenza


After experiencing the cold this winter because of my blower motor giving out i thought i would share how to replace it.
mine went out gradually, worked a few day then stopped and progressively got worse.

you will need a mid sized, short star (Phillips) head screw driver (especially for the back), needle nose pliers, utility knife, patience

you will find the blower motor under the passenger side dash to the right, unless you are flexible feel for a round 5 inch cylinder, you can use a large mirror with a stand, you will need to pull the carpet down, to the left of the cylinder you will find a rectangle "seat" this where the blower locks into place, to the right is the connection cable, evenly around the cylinder are your 5 hex head screws, they are brass in color so not hard to spot, (you can use a ratchet drive for the front 3) loosen and remove each screw, along the fire wall under the blower motor is rubber insulation, you will see a 6 inch bump, using your utility knife cut along the top and notch down both sides of the first cut, this will help with removal and replacement of the motor, pull down on the blower motor and slid it out, this may take a little careful wiggling, once out use your pliers to squeeze the side and pull the connecting cable from the socket, the connection are angled like ' - so this no way to mess up reconnecting the replacement motor, I bought mine from the wreaking yard for $32 (had them pull it for $10 included in the price) new costs $75 and $160, your choice, the wreaking yard bench tested it for me so i know it works but here you can check for your self if in fact the blower motor is the problem.
connect the cable to the replacement motor, turn on your ignition and turn on your fan, if your fan spins you are good to go.
replacing the blower motor is a reverse of the above.

Have fun

on Feb 10, 2015 | Suzuki Cars & Trucks

1 Answer

2004 F150 5.4L lot of water in oil and water leaks from back passenger side of engine. Can't see exactly where since there is no room to see back there.


Some of those big Ford engines take up so much room it is necessary to climb into the bay (with power off, of course) to get a good look. It may be necessary to put your truck on a lift to locate the source of the leak.

Jan 17, 2014 | 2006 Ford F-150

4 Answers

I swamped my toyota in water and now wont even turn over theres no water in oil or intake or distributor.


starter motor fault ?? power to the starter on the thin wire from the ignition switch

Nov 25, 2010 | 1988 Toyota 4Runner

1 Answer

Power steering failing repeatedly on 2005 Chevy Cobalt


the steering motor is located on the colum under the dash,poor design.I bought one at a salvage yard for 150 bucks.took about 2 hours to replace it.you cant just replace the motor,it all comes together

Jan 31, 2010 | 2005 Chevrolet Cobalt

2 Answers

Drivers side window (electric) has stopped rolling up. Any ideas on how expensive that will be to fix? And how long it should take to fix?


Yea..switch should be checked first for power in and power out. If switch about $80-$150. If switch OK then probably window motor/regulator & that's about $200-300

Sep 23, 2009 | 1996 GMC Jimmy

1 Answer

Looking for this part from Panasonic CD or DVD player: PPN13KA12C


Is your Lexus 2/3 generation Navigation system not working? Famous 'No disk detected' message?
I was lucky a month ago and got a used one motor. Repaired my DVD and the GPS works fine. Then I wanted to buy couple more motors in case my wife's Navi goes bad and to have some spare ones. I bet I was searching under both PPN13KA12C and PPN-13KA12C (proper designation) for over a month every day, couple of times a day, and nothing, until today. Google PPN-13KA12C and go to SMC Electronics - CD and DVD Repair Parts to buy them for $6.50 plus shipping. Hurry, they won't last.

Apr 03, 2009 | 2002 Lexus RX 300

1 Answer

2007 0-3 Florida flood damage


Dan-
I am here in Melbourne FL with you. I own and operate Strictly Saab and would be able to take a look at your 9-3 and any concerns you may have with flooding. From the flood, I ended up with foure vehicles which had their complete interiors removed and cleaned, some with mechanical issues, and some with strange electrical issues. Feel free to contact me at 321.432.2034. Have a nice week.
Justin Duthie

Aug 28, 2008 | 2007 Saab 9-3 Aero Convertible

1 Answer

Water leaking in


did you replace windshield?
do you have a sunroof?
these are the only places water could leak.
it could also be the condensation from the dehumidifier of the AC. maybe they forgot to reconnect the hose to expell the water.

Jul 08, 2008 | 2004 Audi A4

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...