Question about 1997 Dodge Dakota

1 Answer

Gets gas gets spark but don't start. new fuel

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 722 Answers

1. does it turn over? if so, strong, or weak? 2. did you replace the fuel filter? 3. coil packs, or distributor (pack(s) can be tested) if distributed check cap and rotor, replace coil, but first check starter relay - 4. Check all ignition fuses, starter fuse - (along with relay{above}) 5. Check all connections from battery - positive, negative etc.
Please let me know if you need further assistance.
carsandcomps,
Guru, Premium Expert @ Fixya.com

Posted on May 26, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Replaced bad coil van cranks but wont start?


Sure the new coil is working? Did you check for spark?Is the fuel pump working? Fuel injectors? ECM?

Feb 21, 2016 | 2005 Chrysler Town & Country

2 Answers

I have a 1998 Jeep cherokee sport. Was driving today and it died. Now there is no spark and no power to fuel pump. Changed fuel pump today and it won't run. Recently replaced oxygen sensors too


U need to check the crankshaft position sensor. The fuel pump will only have power for 2 seconds I till it sees a crank signal. It' controls the asd relay which turns on your spark and fuel

Apr 19, 2013 | 1998 Jeep Cherokee

1 Answer

I have a 94 chrysler concorde. The problem is it won't start, I have replaced the fuel pump and the fuel pump relay fuse. And it still won't start. What should I do now?


check see if you getting spark if not.have vechicle code scan could have faulty ECM .faulty camshaft sensor and crankshaft sensor.make sure engine has been tuned up.replace fuel filter change spark plugs and wires. before engine can run need fuel and spark.either one not working car will not crank.

Jan 12, 2013 | Cars & Trucks

1 Answer

Help with 95 firebird 3.4 no start


you have fuel pressure but the fuel pressure regulator can be bad

Nov 23, 2012 | 1995 Pontiac Firebird

1 Answer

2000 318 ram van wont start new ecm sensors got spark gas


If you are getting spark to the plugs and fuel spray, and you have compression and the spark is at the right time, you should have explosion.
Is it possible the valve timing is off - timing chain issues ?
Are the new plugs fuel-fouled ?

Jul 06, 2012 | 1999 Dodge Ram

1 Answer

The engine turns over but the motor will not start. The van was running fine when it was cut off. It doesn't seem to be getting gas.


It's very likely your fuel pump has failed. Have somebody thump on the fuel tank while you're cranking the engine and see if it starts. If it does, replace the fuel pump. Otherwise get your fuel pressure checked, and check for spark. If no spark, check to make sure the distributor is turning(if applicable) If a 3.3 motor with no spark, suspect the crank sensor or cam sensor. Crank sensor is much easier to replace if experimenting.

Sep 05, 2011 | 1990 Dodge Caravan

1 Answer

I have a 2003 Kia sedona ran out of igas now wont start the code I get say crank posistioning sensor will that cut or cause the fuel pump not to work cause I get no humming from it the code is p0335


No this does not affect the fuel pump. It will affect the spark though. Hit the gas tank in the center a few times. If it starts then replace the fuel pump. Unfortunetly pumps with a few yaers on them will die when ran out of gas. If it doesn't start pull one of the spark plug wires, insert a screwdriver and put it close to the engine. crank the engine and watch for a spark. if there is no spark then replace the crank shaft sensor. before you replace the fuel pump.

Jul 01, 2011 | 2003 Kia Sedona

1 Answer

Motor turns but will not start


You need fuel, air, and fire to start the car. Make sure you check the fuel components. Make sure they work. Fuel pump, filter, lines, injectors, pump fuse/relay. Fuel goes from the pump to the filter, from the filter through the gas lines and then to the engine. Make sure gas is getting through. If the gas checks out, make sure you are getting spark. It could be spark plugs/coils, wires, coil pack, distributor, dist.cap, rotor, cam sensor, crank sensor, ecm. You need to do a spark test. Check your timing belt/chain. Anyone of these can cause your car not to start. I know it is a lot. That is why it is important to check for gas and spark. Make sure you check all your wires, connections, and hoses. Make sure there is no intake leaks. If you have any questions, please let me know.

Mar 06, 2011 | 1994 Buick Century

1 Answer

Cranks no start just died restarted a couple of times now nothing


Check to see if your fuel pump is kicking on. You should hear a buzzing sound for a second or two when you first turn the key. If you don't hear it, check your fuel pump fuse/relay or fuel reset if equipped. It could be a clogged fuel filter. You need to make sure gas is getting fuel to the engine. If it is, then you need to check for spark. It may be because of spark plugs/coils, wires, distributor, dist.cap, rotor, cam sensor, crank sensor, ecm. When you car doesn't start but cranks, there is many things that can cause that. You need to do a spark test and make sure that your getting good spark. It could be the timing belt. You need fuel and spark to start the car.

Mar 03, 2011 | 1996 Pontiac Grand Am

2 Answers

93 honda del sol will turn over but wont start. It has a new time belt, distrib, and the main relay works.


Is it not getting spark or gas? It needs both to run. Both main source. If no spark in any cylinder, then ignition module or crank sensor is likely faulty. If no gas, then fuel pressure regulator or fuel pump or fuel pump relay is bad.

Nov 11, 2009 | 1990 Honda CRX

Not finding what you are looking for?
1997 Dodge Dakota Logo

218 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...