Question about 2008 Scion Xb

Open Question

2008 scion xb. Drivers side headlight is out. I replaced the bulb and it still is NOT working. Where is the fuse for the headlight?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
geniusguy
  • 103 Answers

SOURCE: I need catalyst type and DOT numbers on the headlights

Hi

Sorry for yesterday...my laptop got jammed....

Here are a few specifications:

Model Year: 2008
Make: Scion
Model: xB
Style: 4dr Wagon (2.4L 4cyl 4A)
Base Price: $15,650
Price as Tested: $19,721
Drive Type: Front-wheel drive
Transmission Type: 4-speed automatic
Engine Type: inline-4
Displacement (cc / cu-in): 2362cc (144 cu-in)
Valvetrain: double overhead camshaft
Compression Ratio: 9.8
Horsepower (hp @ rpm): 158 @ 6,000
Torque (lb-ft @ rpm): 162 @ 4,000
Brake Type (front): Front ventilated disc - Rear disc
Brake Type (rear): disc
Steering System: Electric power steering
Suspension Type (front): MacPherson strut
Suspension Type (rear): Torsion beam

Posted on Nov 14, 2008

Ad
  • 2 Answers

SOURCE: HEADLIGHT REPLACEMENT

needed: flathead screwdriver. 10mm socket and wrench, and about 15minutes


You remove the three clips on the grill with a flathead screwdriver. then just pull straight up on the grill to remove. This will expose the bolts for removal of your front bumper. there are also screws on either side of the wheelwell where the bumper meets the fender....all of these are 10mm... then pull out one side of the bumper and the whole thing will come off easily. Also if you have the factory foglights you will need to remove the harnesses from the lights before removing the bumper.....Once the bumper is off the 4 bolts for the headlight are right there for you to see....one under the grillside one one the fender side and 2 on top all of which are 10mm as well....once the headlight is out remove the wiring harnesses and reinstall the new light in exctly the same way but reversed....hope this helps

Posted on Mar 07, 2009

yankstorm02
  • 145 Answers

SOURCE: 2004 scion xb bulb stuck

There is a black locking ring holding the bulb in. After disconnecting the electrical connector turn the lock ring approx. 45-90 degrees counter clockwise, remove the lock ring then pull out the bulb.

Posted on Oct 01, 2009

Testimonial: "provided me with a very quick response and insight on the problem."

villalovos
  • 20 Answers

SOURCE: Drivers side headlight does not work on low beam

You have to trace the wire back to power. You need a volt meter with a continuity tester. Get one that makes a nosie when it makes continuity. You can look on youtube to see how to do this. Good luck.

Posted on Nov 06, 2009

  • 61 Answers

SOURCE: 2008 HHR LS can't get to drivers side headlight bu...

The procedure is in the owners manual, but it is not easy. You need to turn the wheels in (to right for drivers side) and then shut car off. Then you will need to loosen the inside front wheel well, which is plastic, until you can bend it out of the way enough to reach inside to the bulb. The bulb twists out with a 1/4 turn to the left and then unplugs. Just a hint, make sure that the gasket comes out with the bulb and that you only use one when you reinstall the new bulb. Since you have an LS you don't have fog lights, but that bulb is replaced the same way.

Posted on Jun 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the lighter fuse on a Scion xB 2008


Check you drivers manual it will show where the fuse is located and give the correct fuse to replace.
Posted on Dec 03, 2015

Feb 26, 2015 | 2008 Scion Xb

1 Answer

SCION Xb 2008,I WAS installing a radio and now i have no power coming from ignition key or radio or windows


Hate to state the obvious, but have you checked fuses and fuseable links? Was neg. bat. term. disconnected when you were working on this? Reconnected?

May 11, 2014 | 2008 Scion Xb

1 Answer

Headlight fault


You may have blown a fuse, check fuses first then before you try to replace the bulb again check for broken wires or the correct bulb

Oct 25, 2017 | 2008 Kia Pro-ceed 1.6

1 Answer

Left side blinkers wont work 2006 scion tc


There are no fuses in that circuit, so the clicks in the dash indicate that the flasher relay is working. The turn signal switch may be defective, especially if the right side is OK. The replacement flasher relay could be defective

Sep 28, 2012 | 2006 Scion xB

1 Answer

I can not find the 50 amp heater fuse on my 2008 Scion XB


its one of the big square ones. or its missing.

Aug 03, 2012 | 2008 Scion Xb

1 Answer

Back up lights on my 2004 scion xb stop working


first check to see if bulbs are good, next look for fuse to lights, check owners manual, it will tell you where fuse is, could be as simple as a bad fuse

Mar 24, 2012 | 2008 Scion Xb

1 Answer

2004 scion xb bulb stuck


There is a black locking ring holding the bulb in. After disconnecting the electrical connector turn the lock ring approx. 45-90 degrees counter clockwise, remove the lock ring then pull out the bulb.

Oct 01, 2009 | 2005 Scion xB

3 Answers

My driver side window switch stop working scion xb 08


my xb scion 2005 back window wont work cod it be the fuse where is it.

Jul 09, 2009 | 2008 Scion Xb

1 Answer

Cigarette lighter is not working on a 2006 scion xb.


There is a little cubby by the drivers left knee pull the cubby out a fuse pannel is located behind that cubby, change the "ACC" fuse which should be a 15 amp fuse

Mar 31, 2009 | 2008 Scion Xb

1 Answer

Radio & lighter blew on 2004 scion xa


there is a fuse under the dash (on the driver side) behind the little cubby hole by your left knee the cubby pulls out and fuses are located behind replace the "ACC" fuse it is a 15 amp fuse.

Feb 16, 2009 | 2008 Scion Xb

Not finding what you are looking for?
2008 Scion Xb Logo

Related Topics:

203 people viewed this question

Ask a Question

Usually answered in minutes!

Top Scion Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Brad Brown

Level 3 Expert

16194 Answers

Are you a Scion Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...