Question about Chrysler PT Cruiser

1 Answer

What is the indicator light on a 2003 PT Cruiser between the image of a gas tank and the air bag. It is constantly on.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 1,975 Answers

I believe the one you are talking about is the one i posted below for you. If this is the light you are talking about, you can take it to most of your local auto parts stores and they will run a scan for you at no cost to let you know what your computer is trying to tell you is wrong with you vehicle, Once this light stays on it stores a code in your computer in the vehicle. In most cases it has to do with a sensor of some sort having to do with the emissions like an O2 sensor or others. It also stores codes for transmission sensors as well. At least if you had it scanned it would point you in the right direction as to where the problem is. I hope this is what you are asking about and I hope i was able to help some. good luck.


what is the indicator light - clifford224_563.gif

Posted on May 26, 2011

Testimonial: "Thank you, so very much!!!!!!!!!!! The illustration of the Malfunction Indicator Light was very helpful. I will highly recommend this site!"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Air bag light stays on 2005 pt cruiser


Hi

the airbag light needs a diagnostic tool to reset it to switch it off


you can buy them from ebay depending on the make model and year of your vehicle

25718651-extj4arg1t42xbh3l3byl5v2-3-0.jpg


make sure the tool you select has the airbag feature to reset your air bag

cheers

May 29, 2015 | 2005 Chrysler PT Cruiser

1 Answer

Procedure for turning off warning bell on air bag light sensor on pt cruiser 2004 model


You need to take your motor to a Garage where they can put a diag machine on it.

Apr 29, 2014 | 2004 Chrysler PT Cruiser

1 Answer

Engine codes po325 po442 and air bag light


Determine what the code descriptions of errors are. Then check and replace as needed.
Airbag light indicates problem with airbag system. You must visit the dealer to have analyzed and diagnoses given. Do not attemp to fix yourself. The airbag system, can cause severe injury or death.

Jan 21, 2013 | 2003 Chrysler PT Cruiser

1 Answer

Air bag light and chime are now constant. they will not stop every 30-45 seconds. is there something i can replace or do myself? 2002 pt cruiser


You probably need to get your vehicle tested to discover what component of the airbag system has defected. Most likely it is the mass sensor.

Feb 05, 2011 | Chrysler PT Cruiser Cars & Trucks

1 Answer

B1C2FB this is a code that was read as a problem on my pt cruiser


You can go to any chrysler dealer and they should give you the results, but generally this is a fault code for a bad air bag sensor and or controller.

Jul 30, 2010 | 2002 Chrysler PT Cruiser

1 Answer

My 2003 PT cruiser's engine light came on, then the car started running extremely rough. It became so bad, I had to pull over. Sitting idle, it seems to idle a little rough, but when I gas it gas, it would...


Find your air mass flow sensor in the stiff collar of the air ducting immediately after the air filter. Have the engine running and disconnect the plug to the MAF. If this makes the car run evenly again you need to replace the broken MAF. The misfire on plug 4 I think is a downstream event of the MAF not sending the right info to the ECU and consequently not providing the right fuel / air mix to the engine

Jun 07, 2010 | 2003 Chrysler PT Cruiser

1 Answer

Ongoing P0441 purge code on 2003 PT Cruiser GT. I


if you have replace the purge solenoid the problem is either the vaccum supply hose is loosing vaccum or the purge side is hose is either blocked or cracked.

Apr 21, 2010 | 2003 Chrysler PT Cruiser

2 Answers

2005 Pt Cruiser idles rough at stop lights/ poor gas mileage.


i hav a 2003 pt cruiser 2.2 crd touring it wont go over 3000 revs engine light cums on. error code p0243 i hav replaced wastegate solenoids cleaned egr valve cud it be the mass air flow sensor that has a problem thanx

Sep 18, 2009 | 2005 Chrysler PT Cruiser

1 Answer

Codes on my 03' pt cruiser # p1687, p1681 and p0462


need a new sensor, part costs around 200.00 and three hundred for labour costs, they have to take the car apart for it. Would recommend going to dealership for this reason only..

Mar 17, 2009 | 2003 Chrysler PT Cruiser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8589 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...