Question about Honda Passport

1 Answer

I hear noise coming from wheels when car is in motion. If car is lifted and tire is rotated noise can be heard. this is mostly in rear .

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Honda Master
  • 75,117 Answers

This noise you hear is likely a wheel bearing based on your description of the noise, in fact there is little else it can be. You have not given the year and model Honda but the repair is similar on all models so the following instructions should work to get the job done, it is a video. You can get the parts at a reduced price at the following web site. www.rockauto.com



http://www.wonderhowto.com/how-to-replace-honda-accord-wheel-bearings-377538/

Posted on May 25, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why am I hearing a roaring sound in my 2007 Lexus 350?


I am thinking that the noise is from a failed wheel bearing or possible cv joint failure
find yourself another service dealer as tire noise is either there or not there and rotation (if it is a faulty tyie ) would move to the new position
Here is a clue to consider
rotating tires is a ploy by the tire dealers to sell tires
have a wheel alignment done on the rear first and then the front and leave the tires alone
if it is a front wheel drive vehicle you will get 3 times the mileage out of the rear tires compared to the front drive tires and that is a big saving for you
next point -- radial tires continue to wear in the same pattern regardless of where they are put so how are you to know it it is a faulty tire construction or a need for a wheel alignment
third point --- many brands of tires are made as directional tires ( a directional arrow on the side wall) and cannot be rotated because they cannot be fitted on a wheel that rotates against the arrow
if they are the wear in pattern of the belts in the rubber is altered and may lead to tire failure ---the tread pattern is designed to remove maximum water and produce maximum grip in the direction of the arrow

Sep 26, 2015 | 2007 Lexus RX 350 FWD

1 Answer

Growling sound coming from rear when traveling on bumpy road


lift the car on lift end push/pull the wheel vertical. if find excessive play is your wheel bearing. run you hand on the tire back and for if you tire have bumps (every other thread) rotate tire across like X back to for.If the noise move to the front is the tire. Inspect you struts and suspention.

Mar 27, 2014 | 1999 Mazda Millenia

1 Answer

Wheel bearing


If grinding noise is heard coming from front side, lift up both the front wheels and rotate the wheels one by one to listen to the sound, if any. If a noise is heard, replace the front wheel bearings as a set.
If the front wheels do not produce any abnormal noise when rotated, lift down the front vehicle. Lock the front wheels with blocks, release the hand brake. lift up the rear wheels and try to listen to the abnormal noise. If the noise is heard, replace the differential bearings and seals. Top up the differential oil to the mark.

Dec 12, 2013 | 1998 Toyota Tacoma

1 Answer

I have 2002 honda civic with noise coming from rear sounds like a noisey wheel bearing have jacked up both sides and spun wheels with no sign of noise .


Check Tires for feather edge. Join your fingers together, move around the rear Tire from front to back and vice versa on both of the rear Tires and feel the smoothness. If the tread of the Tire resist the fingers in one direction and smooth on the other, then the Tires may be producing the abnormal noise.
Temporarily bring both the front Tires to the rear and rear Tires to the front on the same side, drive the car and watch the noise. If the noise begins to come from the front end, then the Tires are defective and need replacement. . If the noise still comes from the rear wheels then the rear wheel bearings need replacement.(You can also rotate the Tires in criss cross manner temporarily)
The bearings often vary noise with and without load. Be sure to troubleshoot the noise before spending money on costlier spares.

Feb 23, 2013 | 2002 Honda Civic

2 Answers

I have a 2005 gmc sierra 1500 what would cause a roaring sound coming from my truck?


Hi. the noise is likely because you now have tires with a more aggressive tread. The bumpier the tire, the more noise you will hear. Had the same issue with my Sierra.

Jul 23, 2012 | 1998 Pontiac Grand Prix

2 Answers

Noise from rear of 2001 Hyundai accent.


Take it to a different tire store, and ask them to look for a separated belt or an out-of-round tire. The store that balance your tires should have caught that. A bent wheel is another possibility

Or: On a lift, slowly rotate the tire, standing 6-8 feet behind the car and watch the edges of the tread -- see if they "wobble" from side to side. That's a bad tire.

Or: Rotate tires front to back and see if the problem shows up in the steering wheel.

Apr 18, 2017 | 2001 Hyundai Accent

1 Answer

2002 Dodge SX 2.0 I'm getting a howling or ( high frequency vibration of some type) noise from the front end when in motion. Lessens when steering is pointed left of center. No howling when at a...


The first thing I would check is for a bad wheel bearing. If the noise lessens when turning left than I would look at the left front first. Chalk the rear wheels or set the emergency brake. Put the transmission in neutral. Jack up the left side of the car. Grab the coil spring and rotate the tire by hand. If you can feel/hear the noise than your on the right track with the bad wheel bearing. I can give you instructions on how to replace if you need them.

May 26, 2011 | Dodge Neon Cars & Trucks

1 Answer

When I pass 25 - 30 mph my car suddenly sounds like an airplane. It makes no sound when at a stop, only when in motion going past 30. at times it feels like it may be vibrating.


Hi, sounds like a bad wheel bearing, possible tire noise, if you can identify or narrow down which end of the car (front or rear) its coming from you can rotate your tires(front to back) and test drive and see if the sound moves to opposite end now. If not you can use a stethoscope or long screw drivers and spin each wheel by hand (vehicle not running!) and listen for a humming grinding sound while tires are off ground via a lift or jack.

May 17, 2011 | 2003 Toyota Corolla

2 Answers

How do you remove the rear brake caliper on 1996 mercury grand marquis


Removal & Installation
  1. Raise and safely support the vehicle.
  2. Remove the rear wheel and tire assembly.
  3. Remove the brake fitting retaining bolt from the caliper and disconnect the flexible brake hose from the caliper. Plug the hose and the caliper fitting.
  4. Remove the caliper locating pins. Lift the caliper off the rotor and anchor plate using a rotating motion.

WARNING Do NOT pry directly against the plastic piston or damage to the piston will occur.



005ba8a.gif
Rear disc brake caliper removal


1aff680.gif
Rear disc brake caliper installation

To install:
  1. Position the caliper assembly above the rotor with the anti-rattle spring located on the lower adapter support arm. Install the caliper over the rotor with a rotating motion. Make sure the inner pad is properly positioned.
  2. Install the caliper locating pins and start them in the threads by hand. Tighten them to 19-26 ft. lbs. (26-35 Nm).
  3. Install the brake hose on the caliper with a new gasket on each side of the fitting outlet. Insert the retaining bolt and tighten to 30-40 ft. lbs. (40-54 Nm).
  4. Bleed the brake system, install the wheel and tire assembly and lower the vehicle.
  5. Pump the brake pedal prior to moving the vehicle to position the linings.
  6. Road test the vehicle.

May 23, 2010 | 1996 Mercury Grand Marquis

1 Answer

I have a 95 honda civic 2dr coup. when ever the car is in motion i hear squeeking/ grinding from the rear breaks. I don't know what could keep causing this. I just replaced the rear break pads, drum...


you may need a hub bearing. do you know which side? they're relatively easy to check; just jack up rear of car, release e-brake and rotate each wheel, listening for any noise or rumble; another way is to place your hand on the coil spring while spinning the wheel, as any rumbling that can't be heard will be felt in the spring. hope this helps.

Mar 07, 2010 | 1995 Honda Civic

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...