Question about 1990 Ford Escort

1 Answer

This is more embarassing then a problem. I was a truck driver up till Apr 2006. however, in 2005 I bought a CONNEX 3300 HP. After My accident in 2006 i had put it up in the original box. But no manual. So here goes. How do i check the swr's? I havent used the radio in almost six years and forgot which knobs, buttons. or what ever. I know to check it on chnl 40, 1 and i usually did 20 to see the difference. Help!!!! just one more thing, the band for regular CB is high side D?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 22,219 Answers

American is AM uk is FM ,but havent a clue as to what side bands to use or whatever i have a superstar 360 on my boat and i havent used it for so long i have forgotton how to obtain the UK frequencys ,i can skip to truck drivers in teh US but ??? comes with old age ,anyway the way i do it is to use a swr meter but another way is to key up on channel 1 and watch meter and then 40 and whichever way the needles doesnt show full you adjust length of aerial accordingly .do hope this has refreshed your memory a bit .Best of british with it anyway

Posted on May 25, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1997 Ranchero Outback, 4.0i inline 6 engine. Where can I get color coded diagram?


diagram showing spark plug wires to Coil pack? - Ford Truck ...

www.ford-trucks.com > ... > Small Chassis Trucks > Aerostar
Apr 8, 2014 - now I cannot find a diagram for the Driver's Side wire positions at the Coil... (the Passenger side wires are 1-2-3, starting from the front of the engine, simple enough); The Coil pack ... But the Driver's Side wires are not in a Sequence of 4-5-6, instead ... 1997 Ford Aerostar 4.0L RWD (purchased May 2012) Camshaft Position Sensor (CMP) wiring pigtail replacement
May 8, 2012
Help! 1994 4.0L Ranger misfiring & hesitating under load?
Oct 31, 2011
1994 F150 starter wires
Jul 16, 2011
Coolant Loss - 4.0L OHV Lower Intake Gasket
Apr 21, 2004
More results from www.ford-trucks.com

Sep 30, 2015 | Ford Cars & Trucks

1 Answer

Vw Passat 03 dti.when i accelerate i hit a flat spot


Thread: passat 1.9tdi 115bhp 2000 model excesive flat spots - VW ...

www.vwaudiforum.co.uk/.../21982-passat-1-9tdi-115bhp-2000-model-e...
Apr 8, 2015 - Hi everyone I'm new to this forum stuff so if I'm posting in the wrong place about the wrong thing ,pm me and let me know.I've just bought 1.9 tdi passat 115 bhp ... Thread: 1.9 tdi smoking under acceleration
Apr 9, 2015
Thread: 2004 1.9TDI white smoke
Apr 7, 2015
Thread: Audi a3 2.0 tdi flat spot sluggish
Jan 7, 2013
Flat spots in acceleration when less than 60mph in 6th? 2006 TDi ...
Dec 6, 2010
More results from www.vwaudiforum.co.uk

Sep 28, 2015 | Cars & Trucks

1 Answer

Static noise coming from the dashboard of 2005 Buick lacrossr


Automotive Recalls and Technical Service Bulletins for 2005 ...

www.alldatadiy.com > Factory Service Bulletins and Recall Titles
Automotive Recalls and Technical Service Bulletins for 2005 Buick LaCrosse V6-3.6L VIN 7. ... PIP5191 APR 14 Engine - Ticking Noise on Cold Start Up. PI1217 APR ... 03-08-44-005L APR 12 Audio - Poor Radio Reception/Static Interference.

Aug 30, 2015 | Buick Cars & Trucks

1 Answer

I have a consistent clicking noise from the front driver side on my 2009 honda civic ideas?


Is it when your wheels are turned left on take off? sounds like drive shaft. check cv boot for split. if you know a mechanic they will know if it is the drive shaft as soon as they drive it. If it is a crook drive shaft theoreticly it can not come apart but very annoying & embarassing.

Jun 04, 2012 | 2009 Honda Civic

1 Answer

Transmission is slipping in a 2005 ford tarus sel


Just had same prob $3300 later fixed with new trans car had 84k on it no adv notice now every time start car in AM rough till warms up then runs fine

Apr 11, 2010 | 2005 Ford Taurus

1 Answer

My rack and pinion moves to the sides for my 1999 dodge caravan


check the rack for loose mounting bolts or missing bushings would suggest not driving till fixed to avoid accidents.till fixed

Jan 24, 2010 | 2005 Dodge Caravan

1 Answer

Transmission will not shift before 3300 rpm


I would check the shift cable at the throttle body. It may have slipped. You can adjust the shift point by using a screw driver and press on the plastic lock. Only move it a cpuple clicks at a time till you get it where you want it.....I had the same prob with a Monte Carlo....

Dec 29, 2009 | Chevrolet C1500 Cars & Trucks

1 Answer

Power steering gushed out from under car on the


Sounds like one of your power steering lines burst from pressure, or the pump itself went/is going bad, you need to take it into the nearest repair shop and have them repair/replace it.

And I highly suggest you do not drive the vehicle till it is fixed as that's an easy way to cause an accident.

Jul 19, 2009 | 2000 Chevrolet Impala

2 Answers

2003 mitsubishi eclipse wiring diagram


I own a 2003 mitsubishi spyder eclipse GT and my alarm fob broke off its key chain so I havent been using it lately (waiting for replacement). Today I went to use my car (unlocked and opened the door with the key) and the alarm activated. The car still starts but I have to wait till the alarm gos through its cycle before I drive anywhere (embarassment of course). How do I disengauge the alarm system till I get the new fob?

Feb 01, 2009 | 2003 Mitsubishi Eclipse Spyder

Not finding what you are looking for?
1990 Ford Escort Logo

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...