Question about 2007 Dodge Charger SRT8 Sedan

2 Answers

2007 charger what do you call the plastic piece underneath the car? It starts at the bottom of the front bumper and runs back to about 1 to 2 feet.Ours got drug off when pulling into the driveway.It was on the right side.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Expert
  • 52 Answers

THE MORE SIMPLE TERMS ARE CALLED SPLASH GUARDS.

Posted on Oct 13, 2008

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 30 Answers

The plastic piece that starts by the bumper/fenders that runs along the bottom of the doors and side of the car Chrysler calls the Body Cladding (Left or right side), If you are refferring to the piece of plastic under the bumper and front of the engine compartment that protects the underneath of your engine compartment that is called the Belly Pan.

Posted on Aug 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to replace front bumper on a 2002 Dodge Stratus


Bumper is a complete assembly. Underneath bumper is bumper mounting bolts, usually 2 to a side. Remove and entire bumper should come off. Prior to removal check to see if there are any connectors to grille or fenders, sometimes these wrap-arounds have them. There is a book about the subject available in the reference section of your public library called "Chilton's Manual. Book can't be removed from library but pages can be copied. Check U-tube for a How-to-do video on subject.

Dec 05, 2014 | Cars & Trucks

1 Answer

W/shield washer reservoir replacement on 2007 Hyundai Accent


if the same design as 2004 Accent then just remove right front wheel, slide underneath, and start wrenching on it. should be 2 or 3 bolts

Feb 08, 2013 | 2007 Hyundai Accent GS Hatchback

1 Answer

The plastic piece underneath my fron bumper closest to the ground needs replaced, What is it called and where can I find that piece?


its called the front air dam or lower bumper spoiler depending on where you live(im in England)the finisher has NO bearing on the high speed airflow of the car,(unless your car can do 200mph)it just looks good,your local dealer will order up the part or you could try a bodyshop to see if someones wrecked a car lately

Sep 22, 2010 | 2004 Pontiac Grand Prix

2 Answers

How do you replace the fog light bulbs on a 2007 hyundai sonata


Look under the bumper and you will see two large phillips head screws right in front of the wheels. Take these two screws out and bend/move the plastice piece out of the way. Now you can easily get to the bulb. There is a cap that twists off that protects the wires and back of the bulb. Twist this off and then remove the plug portion from the back of the bulb. The bulb then turns 1/4 to 1/2 revolution to loosen and remove. Reverse steps for installation.

Dec 19, 2009 | 2007 Hyundai Sonata Limited Sedan

1 Answer

Front bumper damaged.


It's pretty easy to remove the front bumper.

  1. Remove the plastic "air dam" below the bumper by unscrewing and then popping out the four plastic connectors underneath, then two on the sides.
  2. If you have fog lights, disconnect them by reaching up and behind the bumper.
  3. Using an 18mm socket, remove the nuts that hold the bumper to the frame. They will be located immediately behind the tow hooks, if you have them, or the small bumps where the tow hooks would protrude.
  4. Slide the bumper off.
Here's a link to a writeup for installing an aftermarket bumper, but steps 1-11 explain how to remove the factory one, and it includes pictures.

May 06, 2009 | 2008 Jeep Wrangler

1 Answer

Remove right front fender on 2005 odyssey


NO 2 BOLTS ON TOP OF FENDER UNDER HOOD 1 BOLT BEHIND PLASTIC TRIM BY MIRROR PULL THIS PIECE BACK TOWARDS MIRROR OR IT WILL BREAK TABS OFF 1 BOLT UNDER ROCKER TRIM 1 SCREW INTO ROCKER AND 1 SCREW BEHIND PLASTIC SHROUD GOING INTO BUMPER FROM UNDER NEATH PULL BUMPER BACK SLIGHTY AND YOU WILL SEE A WHITE PLASTIC CLIP PULL BACK AND BEHIND THIS IS A BOLT REMOVE HEADLIGHT CLIP FROM FENDER AND LOSEN BOLT BY HINGE NOW FENDER SHOULD COME RIGHT OFF BOOK IS 2 HOURS TAKES 1 HOUR TO REMOVE BUT GOES ON IN ABOUT 30 NINUTES

Mar 16, 2009 | 2005 Honda Odyssey

1 Answer

Identify a part on the front bumper, 07 Pontiac Grand Prix


the is the radiator air dam it is also known as the front spoiler.

Feb 09, 2009 | 2007 Pontiac Grand Prix GXP Sedan

2 Answers

Cant find oil filter


is it a spin fillter probally located up high

Jan 04, 2009 | 2007 Volkswagen Jetta 2.5 Sedan

2 Answers

How to change the whole headlight assembly on a 05 Honda CRV


You have to remove the front bumper and grill etc

There are 5 bolts holding the headlight assembly in place. 2 at the top and 3 underneath.

Remove the plastic cross piece by prising out the clips and then the grille clips too then unbolt the bolts eithr side under the wheel arch. The bumper is still fastened using cips. Pull the bumper forward to unclip.

Dec 23, 2008 | 2005 Honda CR-V

1 Answer

2006 bmw x5


there are 2 of these bolts and they run vert through the bumber itself the bottom part of the plastic my be hiding it a little bit lay on your back looking up at the bumper you should see it

Aug 10, 2008 | 2006 BMW 5 Series

Not finding what you are looking for?
2007 Dodge Charger SRT8 Sedan Logo

Related Topics:

290 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...