Question about 1997 Hyundai Elantra

1 Answer

1997 Hyundai Elantra - in storage over winter. Can't put into gear when running. Can put into gear when turned off - can then start, clutch depressed, can release clutch and drive but can't shift up or into neutral - no service near by - northern cottage country - must fix myself - clutch replaced about 3 years ago - worked fine last season.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Clutch &pressure plate must have got moisture on it & forze together put car in gear & turn car over it should brake free had it hapen to me

Posted on Jun 08, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Got a hyundai fx coupe 97 and I put my foot on the clutch it moves about 2-3 inches and that's it. its hydolic clutch


My friend it is a serious matter either your gear plate is jamed so please go to the servise center of hyundai fx......................

Sep 22, 2014 | Hyundai Motor 1997 Tiburon

3 Answers

I have a 2001 elantra. What would make it stay in reverse and 1st gear.it is a manual transmission


when you put it in reverse,first thing you feel a spring.after tthat you lift,
a security plate,this plate prevent you from going reverse into 1 gear.
cause the axel turn a little further when you allreddy has stop the car.
this takes two sec.thats why when putting it in reverse after you feel the spring you wait two seconds,then puch al the way in reverse.

Jul 26, 2014 | 2001 Hyundai Elantra

1 Answer

I just put a new clutch in my 04 elantra and its stuck into gear wot do i do


clutch is not disengauging when the motor is running could have put clutch plate in wrong way do you have a good clutch pedal,did you clean of new pressure plate might have had a sticky coating on it

Dec 27, 2012 | 2004 Hyundai Elantra

1 Answer

Ok so i have a 2000 elantra and the clutch keeps slipping. the issue started after i got the car figured it needed a clutch so i had one put in. to my surprise i get a call saying that the clutch was...


It might be the flywheel make sure there are no oil leaks and clutch isn't contaminated does the gearbox select gears ok when it starts to slip before you re-bleed it?

Aug 12, 2012 | 2000 Hyundai Elantra

1 Answer

My 2000 hyundai elantra is automatic it has a code p0734. which the mechanic explained me that i have to get the speen sensor replace and get new clutch because the 4 gear ratio is bad. pls advice what 2...


P0734=A/T 4th gear incorrect ratio. This has nothing to do with the speed sensor. If the speed sensor was faulty, it would also set OTHER gear incorrect ratio codes. My experience tells me the 4th gear incorrect ration indicates the torque converter clutch (TCC) is slipping and nothing more. Unless there was a speed sensor DTC (Diagnostic Trouble Code), the sensor is not the issue (yet). The fact P0734 was set (trust the computer), the TCC is slipping (out of range). Question: Maintenance history may indicate the wrong transmission fluid may have been introduced. Hyundai's Transmission fluid is strictly SPIII... there is no substitute. The incorrect fluid will cause 4th gear slippage. Now, having said that, it doesn't mean the 4th gear (lock-up) clutch isn't worn out. Have a qualified/certified Hyundai Service Technician properly diagnose this issue.

Sep 08, 2011 | 2000 Hyundai Elantra

1 Answer

My 97 Elantra won't start. It's a manual transmission and I have to depress the clutch to start it. The battery is fine. Today I kept pressing on the clutch and it finally started.


do you mean it wont turn over until you push the clutch pedal in, then after several attempts it finally did turnover and run???? clutch switch may be going bad.

Sep 17, 2009 | 1997 Hyundai Elantra

2 Answers

KEY WONT TURN.


have tried to steer it a little while you turning the key? because some the steering lock was stuck.

Jun 02, 2009 | 1997 Hyundai Elantra

Not finding what you are looking for?
1997 Hyundai Elantra Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...