Question about Chevrolet Beretta

1 Answer

It will start and drive no prob but if its sits for a couple hours and u go to start it it wont start

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 2,194 Answers

Depending on the year make and model, you might want to look into the security system. These things are known for failing and leaving the car stranded. They disable starters and/or injectors. Might be your problem. Here is a link on this subject http://vatspasslockpasskeysecurityhelp.yolasite.com/

Posted on May 25, 2011

  • 1 more comment 
  • hostilequ152 May 25, 2011

    ITS A 1996 CHEVY BERETTA ITS LIKE THE CAR IS POSSESSED IT STARTS ONLY WHEN IT WANTS TO

  • Joe Taylor
    Joe Taylor May 25, 2011

    You know, I'm not sure if they have antitheft on berettas. Might look into the starter or ignition itself. Do you have a little black chip in the shaft of you key? If so, then you do have an antitheft

  • hostilequ152 May 25, 2011

    NO IT DOESNT HAVE ANTI THEFT

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

95 pathfinder starts when cold drives for a while fine, turn off ,wont restart,let it sit for a couple hours will restart.


If you mean it wont turn over after driven then the starter is going bad.if you mean it turns over fine but wont start it is something else.is the check engine light on?if so get the codes pulled.

Aug 05, 2017 | Cars & Trucks

1 Answer

Truck wont start after driving


Sounds as if you need to recondition your engine.

Nov 19, 2013 | 2004 Ford Ranger

1 Answer

My jeep wont start It use to turn on and just shut off after a couple hrs of driving but now i cant get it off my drive way the lights and radio turn on when i try too start it but the car wont even crank...


the starter sounds like ur problem for starting the jeep since u changed the battery the computer really did not have to be changed and for the car only running for a couple hrs u might have a clog in ur fuel filter located by the gas tank under the car very easy to change once u locate it. it doe not sound like ur fuel pump cause the car does run for a couple of hours if it was the fuel pump problem it would not even run for more then 10 mins if that.

May 11, 2011 | 1997 Jeep Grand Cherokee

2 Answers

My 1999 yukon wont start i changed master air flow


Fuel pumps are real common to go out on those vehicles

Mar 15, 2010 | 1999 GMC Yukon

1 Answer

I have a '97 Jeep Grand Cherokee. What happens is I can get it to start maost of the time every now and again it wont start. When I do get it to start I can drive for about 5 miles until it stalls and wont...


i would say start with the fuel lot of times if you have rubber hoses they can what you call "vapor lock" causing the fuel to not flow, mite be your prob! Hope this helps!

Oct 12, 2009 | 1993 Honda Accord

1 Answer

1993 toyota previa. car starts when cold,but if i drive car 4 a while and turn it off it wont start until i let it sit 4 a couple of hours.


Corroded positive battery terminal. Clean both the terminal and the battery post and tighten clamp bolt. Don't just tighten bolts. There's a layer of corrosion that conducts when cold/damp and gets warm during starting and charging, dries out, and then won't conduct.

Sep 11, 2009 | 1993 Toyota Previa

1 Answer

Dies and wont restart. 1991 bmw 750il


You have a cam or crank sensor that has gone out.

May 01, 2009 | 1991 BMW 7 Series

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...