Question about Ford Taurus

1 Answer

How to put a serpentine belt back on a 2000 Ford Tarius a kitten got stuck up there and popped it off

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 142 Answers

Tragic!

You will need a wrench to release the tension pulley then route the belt. There should be a diagram under the hood of the vehicle with the routing. Additional damage could have been done to the belt. I would recommend replacing the belt to be safe.

Good luck!

Posted on May 25, 2011

  • 3 more comments 
  • florence_joh May 25, 2011

    Yes it was helpful but the problem is there is no diagram under the hood so I have no way to know if the way I'm routing it is right any ideas?

  • Johnny Tumlinson May 25, 2011

    There are a few different options. Does it have 1 drive belt or does it have 2? What is the 8th digit of the VIN number?

  • florence_joh May 25, 2011

    it has one belt the 8th didit is either a5 or an s

  • Johnny Tumlinson May 26, 2011

    http://www.gates.com/common/part_locator...

  • florence_joh May 26, 2011

    Thanks so much, but I finally took it to garage cost me $25 but no more aggrevation, thanks again have a great memorial day.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Serpentine belt keeps popping/slipping off


The power steering pump pulley must be flushed with the power steering pump shaft,Or else you will have noise or slips right off.12_11_2012_4_28_42_am.gif

Dec 11, 2012 | 1997 Ford Windstar

1 Answer

2000 ford winstar 3.8l engine how to put on a serpentine belt


You need to use a wrench or serpentine belt tool to turn the belt tensioner by connecting to the pulley bolt and turning it clockwise.

Oct 07, 2010 | 2000 Ford Windstar

2 Answers

2000 Ford Focus serpentine belt replacement


How To Install Replace Engine Serpentine Belt Ford Focus Zetec DOHC 1AAuto.com


Jan 19, 2010 | 2000 Ford Focus

1 Answer

Looking for diagram of serpentine belt


0996b43f80208ca1.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Serpentine accessory drive belt routing-3.0L (VIN U) engine


0996b43f80208ca2.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Serpentine accessory drive belt routing-3.0L (VIN S) engine


0996b43f80208ca1.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Serpentine accessory drive belt routing-Ford 3.0L (VIN U) engines


0996b43f80208ca2.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Serpentine accessory drive belt routing-Ford 3.0L (VIN S) engine


0996b43f80208c9f.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Serpentine accessory drive belt routing-Ford 3.4L SHO engine


0996b43f80208ca0.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Water pump drive belt routing-Ford 3.4L SHO engine
i wasnt sure what engine you had hope this helps good luck

Jan 15, 2010 | 2000 Ford Taurus

1 Answer

My serpentine belt popped off, so im trying to figure out how to put it back on


on top of radiator shroud there should white decal with the belt diagram
on it but before you do check the pullys make sure there are not any
loose bent or siezed ones that may have helped your belt pop off

Jan 11, 2010 | 2000 Dodge Caravan

1 Answer

Replace serpentine belt on 2000 ford focus


Here is a link to the diagram you will need to put the new belt on...

http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7002

Here is a link to a video which will show you how to replace the serpentine belt...

http://www.wonderhowto.com/how-to/video/how-to-inspect-and-replace-your-car-s-serpentine-belt-267229/

Oct 03, 2009 | 2000 Ford Focus

1 Answer

Pontiac 2000 Sunfire


look at the hood should have a diagram

Jun 29, 2008 | 2000 Pontiac Sunfire

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...