Question about Mitsubishi Pickup

Open Question

Mitsibushi l200 drive light flashing,it apears to be stuck in 2nd or 3rd gear.Fault code showing p0740

Posted by on

6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 4102 Answers

SOURCE: selespeed gearbox fault

Hi, it might be worth getting your gear selector checked as these have a nylon/plastic ball at the bottom now if this has worn down then when you try selecting a gear it will cause the problem your having.(its under neath the gearstick before it links to the two selector rods so check this.)

Also worth checking alot of cars where the two rods come from the selector and then their is two rods going to the gear box one of these is fixed and cant be adjusted but the other rod can be adjusted and its often the case that this adjustment can take up the play and solve your problem.
The problem with this is that it can be adjusted forwards and backwards it slides when you undo the bolt that goes through it so make sure you can mark exactly where the selector is where you can adjust it so that you can set it back their if it makes it worse or no differance.
If yours can be adjusted then make sure you mark where it is now then just move it a small bit at a time one way and then give it a try if no differance then move it a bit more if it gets worse then put it back where it was originally then try going the other way see if it makes any differance if not then it wont be adjustment problem.
If neither of these are problem then the chances are the gears have stripped and this would give you the problem your having as the faster you go the harder it is for the teeth to locate on the correct gear in the box.

As for stripping the box it isnt really worth doing as the parts would be expensive and would cost as much as a second hand gear box.
The best option would be a reconditioned gear box as you know that it has be rebuilt with any new parts needed and you should also get some warranty on it which is always a bonus.

Are you sure the clutch is ok test this by having the car running and at a standstill with the hand brake on put car into 2nd gear and with the handbrake on gently let the clutch up slowly and see if it feels like its slipping if the clutch is ok then the car will stall this is what will happen if the clutch is ok.

Let me know how you get on or if you have any problems or questions and ill assist you the best i can ok.

Posted on May 27, 2008

  • 2035 Answers

SOURCE: hyundai santa fe 2001

Car error codes::

Diagnostic Trouble Code Storage Condition Remedy
P0100 Mass Air Flow Sensor Voltage High C-8
P0100 Mass Air Flow Sensor Voltage Low C-8
P0110 Intake Air Temperature Voltage High C-10
P0110 Intake Air Temperature Voltage Low C-10
P0115 Coolant Temperature Voltage High C-9
P0115 Coolant Temperature Voltage Low C-9
P0120 Throttle Position Sensor (TPS) Voltage High C-7
P0120 Throttle Position Sensor (TPS) Voltage Low C-7
P0130 O2 Sensor 1 Circuit Voltage High C-30
P0130 O2 Sensor 1 Circuit Voltage Low C-30
P0130 O2 Sensor 1 Open Circuit C-30
P0150 O2 Sensor 2 Circuit Voltage High C-31
P0150 O2 Sensor 2 Circuit Voltage Low C-31
P0150 O2 Sensor 2 Open Circuit C-31
P0201 Injector Valve 1 Voltage High C-20
P0201 Injector Valve 1 Voltage Low C-20
P0201 Injector Valve 1 Open Circuit C-20
P0202 Injector Valve 2 Voltage High C-21
P0202 Injector Valve 2 Voltage Low C-21
P0202 Injector Valve 2 Open Circuit C-21
P0203 Injector Valve 3 Voltage High C-22
P0203 Injector Valve 3 Voltage Low C-22
P0203 Injector Valve 3 Open Circuit C-22
P0204 Injector Valve 4 Voltage High C-23
P0204 Injector Valve 4 Voltage Low C-23
P0204 Injector Valve 4 Open Circuit C-23
P0205 Injector Valve 5 Voltage High C-24
P0205 Injector Valve 5 Voltage Low C-24
P0205 Injector Valve 5 Open Circuit C-24
P0206 Injector Valve 6 Voltage High C-25
P0206 Injector Valve 6 Voltage Low C-25
P0206 Injector Valve 6 Open Circuit C-25
P0230 Fuel Pump Relay Voltage High C-6
P0230 Fuel Pump Relay Voltage Low C-6
P0230 Fuel Pump Relay Open Circuit C-6
P0325 Knock Signal Circuit 1 C-26
P0330 Knock Signal Circuit 2 C-26
P0335 No Engine RPM Signal C-32
P0335 Incorrect RPM Signal C-32
P0340 Hall Sensor Voltage High C-15
P0340 Hall Sensor Voltage Low C-15
P0403 EGR Valve Voltage High C-28
P0403 EGR Valve Voltage Low C-28
P0403 EGR Valve Open Circuit C-28
P0410 Secondary Air Pump Voltage High C-27
P0410 Secondary Air Pump Voltage Low C-27
P0443 Fuel Tank Ventilation Valve Voltage High C-29
P0443 Fuel Tank Ventilation Valve Voltage Low C-29
P0443 Fuel Tank Ventilation Open Circuit C-29
P0500 Vehicle Speed Signal C-42
P0505 Idle Air Control Voltage High C-33
P0505 Idle Air Control Voltage Low C-33
P0550 Power Steering Voltage High C-14
P0550 Power Steering Voltage Low C-14
P0560 Battery Voltage High C-4
P0560 Battery Voltage Low C-4
P0602 Control Module Programming Error C-2
P1110 Intake Manifold Valve 1 Voltage High C-34
P1110 Intake Manifold Valve 1 Voltage Low C-34
P1111 Intake Manifold Valve 2 Voltage High C-35
P1111 Intake Manifold Valve 2 Voltage Low C-35
P1230 Power Supply Relay Secondary Circuit C-3
P1405 EGR Valve Feedb. Voltage High C-28
P1405 EGR Valve Feedb. Voltage Low C-28
P1405 EGR Valve Feedb. Incorrect Signal C-28
P1501 Immobiliser No or Wrong Coding C-5
P1502 Immobiliser No Signal C-5
P1503 Immobiliser Wrong Signal C-5
P1530 A/C Relay Voltage High C-41
P1530 A/C Relay Voltage Low C-41
P1600 Reprogram or Replace Electronic Control Unit (ECU) C-2
P1602 Knock Control Module; Replace ECU C-2
P1690 Check Light Voltage High C-43
P1690 Check Light Voltage Low C-43
P1690 Check Light Open Circuit C-43
P1740 Torque Control Voltage Low C-40
P1740 Continuous Torque Control C-40

These are the error codes:

Posted on Jul 08, 2008

  • 1 Answer

SOURCE: automatic transmission sounds like it stuck in 3rd gear

You need to check the transmission fluid level, if it is low the tranny will not shift. If, however, the fluid is to the proper level then you will need a new transmission.
Try putting new fluid in and look for a leak in the pan gasket, then all you may need is a transmission service. When the service is done the mechanic will look for pieces of metal in the old fluid, if found this is very bad and you will need a new tranny.
You might consider a new or used car, you can definately find a good deal out there!

Posted on Nov 16, 2008

  • 7 Answers

SOURCE: i have a 2000 dodge caravan 3.0L fault codes came

same thing happened in my dodge, come to find out it was the transmission module in the computer, computer needs changing out. I got the true reading from auto zone, transmission shop couldnt get right reading for a year and a half, try auto zone first, they can pinpoint your problem and its free, good luck

Posted on Mar 03, 2009

  • 4 Answers

SOURCE: 2002 kia optima slipping into 3rd and 2nd gear while driving

UPDATE! ! ! Fixed this problem! YES ! ! ! The speed sensors was all that needed replacing. NOT ANY SOLENOIDS ! !. Two of them cost $160 and it solved the problem! Do not buy from the dealers. An after market version is available for $50 each. I was forced to buy dealers.

Posted on Apr 04, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Car shakes in reverse and engine light is blinking, gears will not change gets stuck in 2nd or 3rd gear

When the check engine light flashes it means DONT RUN IT or you will damage the engine. There are codes that your mechanic pulled from the computer, WHAT ARE THOSE CODES?

Apr 29, 2013 | 2002 Hyundai Accent

1 Answer

Vw jetta automatic gets stuck between 2nd and 3rd gear, revs but does not accelerate

Time for a complete rebuild of trans

Any slipping & you continue to drive it,
you ruin it,your done

Nov 23, 2012 | Cars & Trucks

1 Answer

Hey i have a 97 jeep grand chereokee i wen't to the nearest autozone the code came p0740.As im driving the RPM is going to high a low speeds on the highway feel like it down shifting between 3 RPM N...




Further diagnostic with a good scan tool will help, could be all you need is a new solenoid or some electrical repairs. Hope this helps.

Jul 06, 2011 | 1997 Jeep Grand Cherokee

1 Answer

Starts out in 3rd gear

Trans shifts into gear harshly, car feels sluggish off the line, No 1st, 4th or TCC lockup available, Manual 2nd, 3rd and Reverse are only available gears, CEL is on: Transmision is either in limp-home mode or has lost electrical power. If there are lots of error codes in the PCM, check the underhood fuse that powers the transmission, and if it pops again, look for a short in that circuit like an O2 sensor harness touching exhaust. Otherwise, check PCM codes for a particular fault in the transmission causing the PCM to put it in limp-home mode.
What is "limp-home mode" ? This is a fault mode in which the transmission either loses electrical power or the PCM deactivates all of the electronics. The transmission will default to max line pressure. The driver will have Reverse and 3rd, with manual 2nd available by putting the gearshift in 2 or 1 (doesn't matter). 1st, 4th, and TCC lockup will not be available. It will not hurt the car to drive it like this for short periods, but use manual 2nd to get the car moving, and be aware that the trans will generate more heat than normal while operating in limp-home mode due to increased torque converter slippage during 2nd gear starts and no lockup in 3rd gear.
Before guessing at transmission problems, check the fluid level (car warmed up, engine running in Park on level ground) and have the PCM scanned for trouble codes FIRST. This guide is meant for problems that do not show up as PCM codes (like shift A&B solenoid failures, for example).
Thank you for using fixya and good luck

Apr 19, 2010 | 1994 Oldsmobile 88

1 Answer

93 Chevy, gear shift **** between 2nd and 3rd

Remove the fluid - get a good flash light - get a very long screw driver - put the screw driver into the drain hole and force the transmission out of gear. Then remove the Transmission and replace or repair. Cheaper to replace. You bent the forks on the shift mechanism.

Apr 02, 2010 | 1993 Chevrolet C/K 2500

2 Answers

1996 gmc jimmy won`t shift from 1st to 2nd

IF the abs dash light is on and if the speedometer is sluggish or not working at all, it is probably a bad speed sensor on the transmission. and easy fix under $40 for the part. Mine was stuck in second gear for a while then worked then it stuck in first gear and i had the CHECK ENGINE light on.

Dec 03, 2009 | 1996 GMC Jimmy

4 Answers

2001 Hyundai Santa Fe - Engine Code P1602, stuck in gear

Im having the same problem with my 02 Santa Fe. How do i go about fixing this problem? And is it costly? Please help

May 20, 2009 | 2001 Hyundai Santa Fe

1 Answer

Transmission with codes P0218 P0732 P0733 P0740 P0846 P1790

I agree, this is a lot of codes. I would tend to think this would be electrical, perhaps computer are a loose connection? These trannys I have rebuilt so far usually have a couple of codes related to the problem but not this many - all over the place.

Apr 16, 2009 | Chrysler Town and Country Cars & Trucks

1 Answer

05 mitsubishi l200 warrior changing up from 1st gear to 2nd allways snags but does not crunch

I have just got a mitsibushi L200 with no hand book .
Is there anyone who knows how to get it into two wheel drive,
I have tried but get the flashing 4 wheel drive simble still on the display and the sterring is heavy like its still in four wheeldrive.

Oct 06, 2008 | Mitsubishi Pickup Cars & Trucks

1 Answer

Trans stuck in 3rd gear, key won't come out of ignition.Check eng light is on.

The most likely cause of this condition may be a loss of voltage to the transmission on circuit 1020. This loss of power may be caused by an open in the ignition switch. This condition my also be the result of an incorrect installation of an aftermarket electronic device such as a remote starter or alarm system.

There is a tsb on this problem:
TSB# 01-07-30-002D

Jul 30, 2008 | 2002 Oldsmobile Bravada

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8201 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides