Question about 2000 Jeep Grand Cherokee

1 Answer

2000 jeep gc wont stay running

When i start the jeep it runs for about 5 seconds then turns itself off. its been an ongoing problem

Posted by on

  • 1 more comment 
  • Anonymous Mar 15, 2014

    jeep will start but runs for 5 seconds all gauges stop working all so

  • Anonymous Mar 15, 2014

    04 Jeep GC, turn key, gauges swing but will not start, reset battery cable, starts up with no problems until it happens again.

  • Anonymous Mar 24, 2014

    does not stay running and says no buss

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 335 Answers

Lock all the doors unlock the doors with the key because the security system thinks its being stolen and it shuts off the injectors
Try another key the chip in yours may be defective.

www.aceautomotive1.com

Posted on Aug 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

No battery problem either


My guess is that after it ran out of gas, the key was in the forward position for a while and you unknowingly interrupted the antitheft system. Try to reset it.

RELEARN PROCEDURE:
Turn the key on, with the engine OFF.
Try to start the engine, then release the key to ON, Engine will not start.
Watch the security telltale, after about 10 mins, it will turn OFF.
Turn OFF the ignition, and wait 5 seconds.
Repeat steps 1 through 4 two more times for a total of 3 cycles/30 minutes. You must turn the ignition OFF for 30 seconds before attempting to start the vehicle after the 3 cycles. Then start the engine .


Do It Yourself GM Security bypass
26307316-p5gn0s2jo44dkhw0s1rtkrnt-4-0.jpg

Oct 10, 2016 | 2000 Chevrolet Cavalier

2 Answers

My car wont start after i changed the fuel filter wat is the problem 2000 jeep grand cherokee Laredo


keyon .off 5 times then start.
or crank for 5 seconds.
this will prime it
some cars dont prime with key on trick. only cranked.

Apr 20, 2015 | 2000 Jeep Grand Cherokee Laredo

1 Answer

Jeep 2000 Gc will run 15 to 20 minutes and cut off, will restart after 5 to 10 min. what could be causing this


tune it up this decade, yet?

but is dead for 10min, so why not do the tests dead.
seems logical , no?
check for spark at all cylinders
if good,
check for flooding
if not flooding use test fuel, start now?

Sep 07, 2014 | Jeep Grand Cherokee Cars & Trucks

1 Answer

2005 Jeep GC starts and Dies


What gets you another chance at starting it? Do you have to wait

Feb 10, 2013 | 2005 Jeep Grand Cherokee

1 Answer

Turns over won't start


If pump is getting power and does not run, then it would be safe to assume there is something wrong with it or it does not have a good ground. Especially now, with outsourcing to other countries, quality control is abysmal...don't believe anything is good till it is working.

Jul 09, 2009 | 1998 Jeep Grand Cherokee

1 Answer

2002 Jeep GC Laredo: Starts up then stalls within seconds


Does the vehicle crank for extended period of time upon first starting? If so the fuel pump needs replacing.

Apr 15, 2009 | 2002 Jeep Grand Cherokee

2 Answers

Wont hold idle will start with foot depressing gas pedal will run with foot on gas but stalls when foot removed


Check and clean Idle air control valve. Make sure its responding to signal as well. Also make sure ther are no vacuum hoses disconnected. This may not be a "cure" but it's a good place to start.

Apr 14, 2009 | 2001 Jeep Grand Cherokee

1 Answer

Won't stay running


sounds like you have a bad ECU unit. have it checked.

Dec 28, 2008 | 2002 Jeep Grand Cherokee

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

525 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...