Question about 2001 Volkswagen Jetta TDI
Fault codes explanation:
P0725 = Engine speed input circuit; CAN-BUS no communication with Engine Control Module (ECM); Invalid data received from ECM; damaged ECM.
P1850 = Data-Bus Powertrain missing message from ECM.
P1875 = Transmission Automatic Hall Effect sensor power circuit short to battery
I recommend you to access the ECM memory using VAG or similar diagnostic tool. But if you need to check a few things before scanning, I would recommend the following checks in your case:
- check the battery cables (clean and tight contacts)
- check engine ground cable (clean and tight contacts)
- check ECM (Engine Control Module) connectors and ground, the ECM is in plenum chamber under the windshield.
Having checked this wiring (most likely culprit), and made sure that contacts are clean tight, and connectors are fit, if the problem persists, (unlikely), you would need to get the codes using a VW equipment, to get the proper codes.
PS: there are some bulletins refering to ECM software updates on your model, so you should also check these out, if the problem points to ECM replacement eventually.
Posted on May 25, 2011
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
May 06, 2015 | 2001 Volkswagen New Beetle
May 26, 2013 | Cars & Trucks
Mar 07, 2011 | 1991 Honda Civic
Aug 20, 2010 | 2001 Volkswagen Jetta TDI
Nov 04, 2009 | 2001 Volkswagen Beetle
Aug 02, 2009 | 1992 Chevrolet Caprice
Nov 30, 2008 | 2001 Volkswagen Beetle
Oct 10, 2008 | 2003 Volkswagen Beetle TDI
272 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: