Question about 2006 Toyota Sienna

1 Answer

I have a Toyota Sienna with comun US trailer electrical conection.\r\nHow do I conect this 4 cbles to Europe 7 conector ? US conector have: brown>tail or parking light = 5+7 ( 58R, 58L ) left and right tail light. US conector green > right turn signal = 4 ( R )right turn signal. US conector yellow > left turn signal = 1 ( L ) left turn signal US conector white > ground = 3 ( 31 ) Ground Where to conect 2 ( 54G ) fog tail light ? Where to conect 6 ( 54 ) stoplight ? I have imported this van from USA to Sweden !

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Toyota Master
  • 8,531 Answers

Hi, sorry but these signals are not available from the 4 prong connector. You will have to run additional wires and perhaps a switch if the rear fog lights are needed and you don't have them on your van. I don't know what the rules are for trailers in Europe, but the 4 wires you have already aligned will provide signals, brake, and tail lights on the trailer. If the trailer has a center brake light on the back, that will not work unless you run a wire from your brake light switch in the car (above the brake pedal) to the #6 terminal on the connector. If you have fog lights in your van, you can run a wire from the fog light switch to the #2 terminal on the connector. Do all trailers in Europe have fog lights in the rear? If they do, and you don't have fog lights in your van, you will have to add a fog light switch to the van and run the wires back to the connector. Please let me know if you have more questions, and thanks for using FixYa.

Posted on May 25, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Conecting up a alternaror witch wire gos were

There is only one wire and one conector,all toyotas that Iknow are the same one conector and the heavy wire that feds the battery.

Jan 04, 2011 | Toyota Corolla Cars & Trucks

1 Answer

We changed the radio in a 1990 toyota corolla now the indicators dont work. we checked the fuse but it is still good how would u get it working again

Forgot to conect hazard switch or this is stuck, try cycle it a few times a litle hard if not check conector may not be pushed all way in. good luck

Dec 05, 2010 | 1990 Toyota Corolla

1 Answer

2003 escalade ext. conected my trailer (1992) to the 7 pin conecter and the brake and turn signals do not work. is this a wiring problem or diferance in configuration between a newer and older vehile.

How are they not working? This is a problem if the trailer has a different set up. Such as the brake and turn signal filament being the same. If that is the problem go to a camper supply store near you and buy and install the convertor box that is made to correct these problems.

Aug 20, 2010 | 2003 Cadillac Escalade Ext

1 Answer

What is the towing capacity of a toyota sienna?

2006 Sienna Standard towing specs:

2WD or 4WD: Max Tongue Weight: 200 lbs
Max trailer and cargo weight: 2,000 lbs;
(over 1,000 lbs requires trailer brakes)

Max trailer and cargo weight: 3,500 lbs WITH the factory tow package

Thanks for using FixYa!

Feb 16, 2010 | 2006 Toyota Sienna

1 Answer

How do toyota camry 1997 3,0 v6 for code po446

The code po446, is a problem in the valve of the canister, is posible the whires need cleans, or the conections between the valve and the ECU have problems, or finaly, the valve have lose the vacum or the electrical conection.
Good luck.

Dec 21, 2009 | 1998 Toyota Camry

1 Answer

Trailer kit installation

It should have. If not a reputable hitch like Reese or Hidden Hitch will come with nut plates. Hope this helps.

Feb 05, 2009 | 2006 Toyota Sienna

1 Answer

1999 chevy tahoe 5 wire trailer wires, what does each color do?

Yellow is the left turn signal, White is ground, Dark Green is the right turn signal, Brown is the running lights and brake light, the others are for the electric brake set up for the trailer.

Sep 14, 2008 | 1999 Chevrolet Tahoe

1 Answer

Signal lights fail to work. keeps blowing fuses.

Hi, the best way to solve this problem is installing a conector that comes allready made for your ventue ,it conects under the rear of your van an , you can buy it at auto zone ,checkers pep boys ,wallmart sells some of them too ,it goes at the original conections ,(no cutting or splicing)...I hope this help.....

Jul 15, 2008 | 2000 Chevrolet Venture

1 Answer

Electrical problem

could be one of the relays try to locate the ecm relay or fuel pump relay and swap it,

they also have a ground conector very close to the batteri most of time blak and green cables and they melt inside causing high resistance and poor conection

May 28, 2008 | 1998 Ford Contour

Not finding what you are looking for?
2006 Toyota Sienna Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides