Question about Mitsubishi Eclipse

1 Answer

The transmission on my 1998 Eclispes is going bad and i can find one in my local junkyard. What other car brand can i use

Posted by on

  • ralfo Aug 21, 2008

    my 98 mitsubishi have a graiding noise in the transsmission . a mechanic pull the transsmission out and check the release bearing and clutch and pressure plate. and everething look fine , so he putit back , and still making the sound. it is posible that the transsmission has bearings inside? pleas help. the tranny is a 5 speed.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Mitsubishi Master
  • 329 Answers

If you have an RS or GS, you can get a tranny from a 4cyl dodge avenger or nt eagle talon. you can use a few others with slight modififications, the dodge neon transmissions work if you switch out bell housing but gear ratios are different on the SOHC.
there are some other chrysler cars too but i forget exactly which ones. the NT PT cruiser tranny works but i can't remember if its a direct swap or if it needs to be modded.

Posted on Aug 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Owners manuel for 1998 e 250 van


Try your local junkyard first, then the local Ford dealer.

Jul 11, 2014 | 1998 Ford Econoline

3 Answers

I dented and cracked my transmission oil pan on my 96 maxima, where can i find a new pan?


Check your local auto salvge yard. if they don't have one, they're all hooked up to networks with other yards, and can find you one somewhere. also try the internet, or, of course there's the dealer, if your rich! good luck.

Jan 03, 2011 | 1996 Nissan Maxima

1 Answer

Where to get window open/closing switches


Cheapest place would be at one of your local junkyards however you can also go to a local auto parts store or even the dealership.

Jul 18, 2010 | 1998 Oldsmobile LSS

1 Answer

MY FORD F-250 TRUCK TRANSMISSIOM WON'T GO FOWARD ONLY BACKWARDS


Sounds like you need to replace your transmission. Some options are 1) Take it to a tranny shop to be rebuilt. 2) Go to your junkyards and purchase one or 3) Purchase a brand new one

Jul 18, 2010 | 1999 Ford F250 Regular Cab

1 Answer

I need transmission sensor for 98 ford contour


Try the junkyard or craigslist. with that you don't know if the sensor is good so i would recommend going to the dealer. which sensor is it

Apr 26, 2010 | 1998 Ford Contour

2 Answers

I'm trying to find a part for my 1998 Mitsubishi Galant Center Console. This plastic section, (looks like shiny modeled wood)is broken. This is the cosmetic part in the center-lower console that is around...


A great resouce for galant owners is http://www.thegalantcenter.net/forum.php

As far as your part, check with your local junkyards or Carparts.com (on line listing of parts from numerous junkyards). You'll pay double the junk yard price at the Mits dealers. If you use the mits dealer they will loook up the part and order it for you.

Feb 28, 2010 | Mitsubishi Galant Cars & Trucks

1 Answer

Transmission my transmission went out about 3 months ago and i need a new transmission and i dont have a lot of money and only have $300.00 dollars to spend on a transmission


get to a junkyard n make a deal cause other problems the age of car will occur n u need to be thrifty--u cud git a 2nd opinion on ur old tranny-ie ajust/low fluid

Jan 19, 2010 | 1998 Mercury Sable

2 Answers

1998 honda accord does not start, no crank


CALL YOUR LOCAL DEALER!! there is a interlock update on the car... try that first.. but the the sensor in the shift might be bad.. you can unplug it to check if that's the problem it's under the center councel ... if your looking down at the shifter it's on the left side you can actual reach your had undter the plastic on the driver side and unplug it (by the carpet) just take out the one or two screws on the side by the carpet and i think it's a single wire up along the left side of the shifter...

Aug 21, 2009 | 1998 Honda Accord

1 Answer

1996 Jetta Auto Trans Slippage


The automatic transmission in these cars are known for early failure. They are very complex and often cost more to rebuild than it would be to buy a new one. I know that many transmission shops wont even touch this car. Your best bet would be to search your local junkyards and find a transmission from a car that was wrecked (you know it was working when wrecked) or a transmission from a junkyard that will guarantee it's functionality. A new transmission will cost about $2,000 -$3,000 installed, depending on where you go. If the car is in good shape, it may be worth saving. In great condition it's worth about $3,000. Keep that in mind. If it's not in great shape, it might be a good idea to find a different car. Good luck.

Jul 06, 2009 | 1996 Volkswagen Jetta

2 Answers

I have a 1997 taurus transmission badly slipping I need a manual to look at where can I get one for free


There isn't much you can do about that problem. You might try
changing the fluid and filter in the tranny but it is likely you will need the trans rebuilt. Good luck. Neil W.

Dec 24, 2008 | 1992 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...