Question about Ford Laser

1 Answer

Remove and install water pump on 1988 ford ke laser

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 104 Answers

You have to remove your belt ...fan ...and fan shroud then remove outer bolts off water pump housing take off replace with new water pump and GASKET, seal gasket with permatex before placing gasket in place then rebolt new water pump on and your golden.....make sure no dirt or debris gets in ...im glad i can help ...

Posted on May 25, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cant find heater hose cand find the one from water pump


I believe the reason that you are not able to find the hose coming from the water pump is because you haven't removed your intake manifold yet. The hose comes out directly behind the pump and runs under the intake to the back of the engine. Do you need to repair it? If repair is needed make sure you have a torque wrench and a sequence order for removing and installing the manifold bolts. I hope I could be of some help to you.

Dec 09, 2010 | 1988 Ford F 150

1 Answer

Where is the water pump on a Ford KJ Laser?


The water pump on the 92 Laser is easily replaced. You just need to untension the the belt driving the bump. Once you have done that all you need to do is undo the bolts and take the pump into your local auto parts dealer. Now that you have the pump install it and retension the belt.

U actually have to remove alternator belt and powersteering/a/c belts, then remove timing belt cover, remove timing belt adjuster, and slide timing belt off top pulley, making sure you mark it before removing it, so as to put it back in same position. Next, unbolt 2 bolts at bottom of water pump (this is a bit fiddly, but doable, then, undo water pump, replace with new water pump, being sure to use gasket cement, aswell as new gasket, which should be supplied with pump, then put it all back together, in reverse order of removal. Fill cooling system, check for leaks, and voila, u have done it :)

Check this at ehow.com

Nov 09, 2010 | Ford Laser Cars & Trucks

1 Answer

How to rremove a timing belt/chain on a 1988 ford f-150. 4.9l engine


remove fan and pulley remove harmonic balancer remove water pump take timing chain cover off should be either 7/16 or 1/2 socket remove top timing chain not gear yet line up dots bottom gear dot at 12 oclock top gear at 6 oclock then remove gears and replace

Sep 18, 2010 | 1988 Ford F 150

1 Answer

How to change cv joint boot ford laser 1988


remoce the out board cv joint from the steering knuckle.Remove the clamps from the boot, slide off the cv housing installation is opposite removal, you will need a special tool, to insatall the new clamps.

Apr 24, 2010 | 2006 Ford Laser

1 Answer

How do i remove the cooling fan on my 88 ranger 2.9? it has the clutch fan


There are four bolts that hold it on at the water pump using a wrench loosen them, then remove the belts,before removing fan blade.once out you can separate it from clutch with another four bolts. reverse install.

Jan 17, 2010 | 1988 Ford Ranger

1 Answer

1988 f150 pump stablizer gone bad


remove water pump timming cover and replace pump driver front of cam think that is what your saying went bad? not a had job

Aug 06, 2009 | 1988 Ford F 150

1 Answer

Water pump installation


take it off and put the new one on the same way. get new gaskets

Feb 24, 2009 | 1988 Ford F 150

1 Answer

How to change the water pump on a ford escort 1.3gle 1986 model


  1. Let me know if you cannot see diagrams(happens sometimes) or if you have any questions
Just to make sure. I assume that you are seeing coolant leakage from around the water pump assembly.

  1. Disconnect the negative battery cable.
  2. Place fender covers on the aprons.
  3. Drain the cooling system.
  4. Remove the accessory drive belts.
  5. Remove the timing belt cover.
  6. Use a wrench on the crankshaft pulley to rotate the engine so No. 1 piston is on TDC of the compression stroke.
Turn the engine only in the direction of normal rotation. Backward rotation will cause the timing belt to slip or lose teeth.
  1. Loosen the belt tensioner attaching bolts, then secure the tensioner over as far as possible.
  2. Pull the belt from the camshaft, tensioner, and water pump sprocket. Do not remove it from, or allow it to change its position on, the crankshaft sprocket.
WARNINGDo not rotate the engine with the timing belt removed or serious engine damage could occur. The 1.3L and 1.6L engines are of the "interference type," meaning it is possible for the valves to contact the pistons if their reciprocation is not carefully timed and controlled. An engine allowed to spin freely without the timing belt could bend valves and scuff pistons almost instantly.
  1. Remove the camshaft sprocket.
  2. Remove the rear timing cover stud.
  3. Remove the heater return tube hose connection at the water pump inlet tube.
  4. Remove the water pump inlet tube fasteners and the inlet tube and gasket.
  5. Unfasten the water pump to the cylinder block bolts and remove the water pump and its gasket.
0900c1528008b2ee.jpgFig. 1: If equipped, remove the cover from the water pump 0900c1528008b2ef.jpgFig. 2: Unfasten and remove the heater return tube hose connection at the water pump inlet tube nuts from the studs 0900c1528008b2f0.jpgFig. 3: Location of the water pump mounting bolts-1.9L engine 0900c1528008b2f1.jpgFig. 4: After unfastening the water pump retaining bolts, remove the water pump from the engine compartment 0900c1528008b2f2.jpgFig. 5: If you are reusing the old water pump, remove the gasket ... 0900c1528008b2f3.jpgFig. 6: ... and carefully clean both of the water pump mating surfaces using a gasket scraperTo install:
  1. Make sure the mating surfaces on the pump and the block are clean.
  2. Using a new gasket and sealer, install the water pump. Tighten the bolts to 30-40 ft. lbs. (40-55 Nm) on 1981-87 models, or to 15-22 ft. lbs. (20-30 Nm) on 1988-90 models. Make sure the pump impeller is able to turn freely.
  3. Install the water pump inlet tube and the inlet tube gasket and fasteners.
  4. Install the rear timing cover stud. Install the heater return tube hose connection at the water pump inlet tube.
  5. Install the camshaft sprocket.
  6. Install the belt from the camshaft, timing belt tensioner, and water pump sprocket.
0900c1528008b2f4.jpgFig. 7: Radiator hose-to- engine mounted water pump inlet tube-gasoline engines 0900c1528008b2f5.jpgFig. 8: Exploded view of common water pump inlet tube and related fasteners-non-A/C type 0900c1528008b2f6.jpgFig. 9: Exploded view of water pump and related components-1988-90 1.9L engineDo not rotate the engine with the timing belt removed.
  1. Tighten the belt tensioner attaching bolts, then secure the tensioner over as far as possible.
  2. Install the timing belt cover.
  3. Install the accessory drive belts.
  4. Refill the cooling system and reconnect the negative battery cable.

Nov 15, 2008 | 1983 Ford Escort Gt

1 Answer

Weheel bearings 1988 KE Laser


They are easy to replace but should be done at work shop unless you have the tools to remove and install the bearing outer cone,a press is not required They are easy to damage when refitting.If you wish to know more and attempt it yourself you will need a half inch socket set Metric and imperial,a punch,hammer,grease,pliers for the split pin,clean rags,screwdriver to loosen brake shoes off if brake drum doesnt come straight off and a bit of patience.Once youve done it to one side the other will be easier and quicker.Let me know and Ill walk you through it as you do it .

Oct 17, 2008 | 2006 Ford Laser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

203 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...