Question about Honda CR-V

1 Answer

How to replace broken stud of honda crv 2001 front wheel

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 31 Answers

Remove wheel, brake assembly & rotor. rotate to where the broken stud is in the opening where the brake assembly was. drive the broken stud out of the hub flange. then install the new stud by stacking washers on the new stud and tighten the lug till it pulls the new studs flange tight against the back side of the hub. remove lug and washers , reassemble .

Posted on May 25, 2011

  • justme1015 Aug 21, 2011

    clearly you've never did a stud replacement on a 01 cr-v, because it is not that easy

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i change a front wheel stud


your best bet would be to take it to the car doctor (mechanic)
or ask Hyundai as it may vary from car to car

Oct 08, 2014 | 2001 Hyundai Elantra

1 Answer

Broken wheel stud on the left front wheel-


Try spinning the hub around to different spots to see if you can wiggle it out.

Apr 08, 2010 | 1998 Honda Civic

1 Answer

Will alloy wheels from a HONDA CRV fit a SUZUKI GRAND VITARA. Both are 5 stud so just wondering if anyone can help


The rims from the Honda CRV won't fit the Grand Vitara.

The Honda has a 5 X 114.3mm spacing and the Grand Vitara has 5 X 139.7mm spacing. This means that even though they are both 5 lug rims, the Honda lugs are spaced closer together than the Vitara so they won't match up.

Nov 07, 2009 | 2001 Suzuki Grand Vitara

1 Answer

Removing a broken stud on front wheel


generally studs are press in thru the back of thr rotor. You need to remove the rotor and with a punch and hammer drive the broken piece out. Replacement studs are avaliable at any parts store.

Sep 20, 2009 | 2002 Honda Civic

1 Answer

Broken stud on left front wheel


Remove: wheel, brake caliper & rotor. Drive out the remaining stub with a hammer and punch. Insert a new stud and pull it into place by tightening the lug nut. Before running out of threads, remove the nut, insert a stack of washers or a large nut which slips over the threads without contacting them, tighten the lug nut to seat the stud.

Jul 12, 2009 | 2001 Pontiac Sunfire

2 Answers

Broken wheel stud front left 1992 honda accord


Only if there is an Acsess Hole Directly Behind the STUD'S PUNCH THE Broken SHORT one OUT But there May Not Be Enough ROOM FOR the NEW LONG STUD to go in between the HUB & Rotor Check this FIRST If you see GOOD CLEARANCE TO GET The new STUD in Then just Drive the old one out , and Use A LARGER than Stud Nut Or Washers to Pull New Stud Threw some Before Putting Wheel on. Then Put Wheel on And Tighten Wheel , Retorque after a Few Hundred Miles.

Mar 29, 2009 | 1992 Honda Accord

1 Answer

Front wheel stud on 2005 honda civic


U must remove the hub assembly to replace the stud.

Mar 24, 2009 | 2005 Honda Civic

1 Answer

Two Broken Wheel Studs on Front Driver's Side


It would be best to have the work carried out at a garage of your choice. A garage you have used before and trust to do a good job. Depending how long it takes to free the studs, will depend on the final price.

Nov 24, 2008 | 2000 Honda Accord

1 Answer

I have 2 broken wheel studs, front right wheel on a 2003 Accord?


counter clockwise as normal...studs are pressed into hub..need to remove remains and then press new studs in...good luck

Nov 19, 2008 | 2003 Honda Accord

1 Answer

Lug bolt on front drivers side wheel is broken & needs replaced. I'm doing the job.


Safely jack and support the vehicle,remove wheel and tire assembly,with a punch and ball peen hammer (and safety glasses) or just a hammer,carefully knock broken stud out of the hub,it will fall out the back.Now take new stud and spin the hub until you find a spot where it will insert into the hole from the backside.Start the stud through the hole from the backside of the hub.Now at this point,you are going to PULL the stud into the hub,but the threads must be protected from galling.I use Anti Seize compound and some flat washers.Liberally coat the threads of the new stud with anti seize compound to protect the threads,stack some flat washers on the stud,install the lug nut,and tighten by hand.The stud will pull into the hub some.Remove lug nut,and stack more washers on the stud,and repeat the tightening process.Repeat process until stud is fully seated.Now remove anti seize compound with brake cleaner or equivalent solvent.Reinstall wheel and tire,and call this job completed.Remember to rate this solution.Good luck.

Sep 01, 2008 | 2001 Honda Civic

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,338 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...