Question about Daewoo Lanos

1 Answer

Electric Windows have stopped working. Fuse hasnt blown for them. Is there an easy way to have them work or test motors?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 88 Answers

There's a couple of things you can check right off the bat if you're sure the fuse hasn't blown.

  • The first thing I would check is the window lock switch. Most cars have a window lock switch near the driver's master controls for all the windows. This switch can accidentally get turned on, locking all the windows from operating.
  • It that's not it, have all the windows stopped working or is it just one window? If it's all of the windows that have stopped working, chances are, not all of the motors have failed at the same time. That would mean that it's most likely the driver's master window switch that has failed.

Posted on May 25, 2011

Testimonial: "I tried the window lock 1st thinking this may have being put on but wasnt this. To start it was just the passengers window that stop then the drivers we never tried the rear passenger windows untill the drivers stopped working and noticed these werent working either. So indications are pointing to the master switch which has failed like you said"

  • brady_78 May 26, 2011

    I tried the window lock 1st thinking this may have being put on but wasnt this. To start it was just the passengers window that stop then the drivers we never tried the rear passenger windows untill the drivers stopped working and noticed these werent working either. So indications are pointing to the master switch which has failed like you said

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I Check for a bad fuse when my window stops working on my 2003gmcsierra1500


To check fuses, use a digital meter. Touch the suspect fuses with the leads to learn if there is power flowing through. I have not worked on your exact vehicle but most fuses now have a small access port so you can test the fuse without removing it. There may also be a relay under the hood that controls the power windows It should be clearly marked so you can find it. Some auto parts stores can test those for you without cost, They want your business.

Oct 02, 2014 | GMC Cars & Trucks

1 Answer

Why won't the passenger side window roll up?


its electric windows right.
1: blown fuse.
2: controls bad. to motor
3: bad motor
4: jammed window guide, overloading motor

do you want to guess, or test.
if test, then any voltmeter sold finds this easy, even a 10 buck meter at walfart.

Jul 25, 2014 | 2002 Isuzu Axiom

1 Answer

Can't roll done rear electric windows


If both windows stopped working at the same time then you should check your fuse box to make sure you don't have a blown fuse.

Jan 04, 2013 | 1989 Oldsmobile Eighty Eight Royale

1 Answer

Why are my electric widows not working?


have you checked the fuse box? you may have blown the fuse that controlls the electric windows? or it could be a bad relay switch? what are the symptoms? it could also be bad window regulator or motor?

Jun 20, 2012 | 2005 Peugeot 807 2.0

3 Answers

Electric windows in mercedes vito stopped working


Fuse has blown out. Check the fuse box under the steering wheel. The plastic cover has the diagram on the back, to see which fuse is for the electric windows.

Nov 20, 2010 | 2010 Mercedes-Benz Sprinter

1 Answer

The electric window in my ford fairmont stopped working...


Ford vehiclesuse electric motors to turn the window regulator in models equippedwith power windows. These motors can wear out, the fuses can blow, orother electrical problems could occur that can prevent the window frommoving properly. you may try to diagnose the power window problem. Use this steps:

1. Check the fuses for burned out filaments by pulling the appropriate fuseand viewing it. Most Fords will have transparent fuses, and the filament can bechecked with a bright light or in sunlight. Many Fords come with a fuse pullerlocated in the interior fuse block cover. This small puller is a simple pair ofclips that grab the edges of a blade-style fuse. There may be a secondary fuseblock under the hood on the driver's side wheel well. It has larger blade fusesfor protecting the computerand subsystems from damage. Replace any blown fuses and check the window'soperation.
2.Test the window operation in relation to the other windows in the vehicle. If only one window is inoperablebut the others work, the problem could be a switch or a failing or bad electricmotor. Switch replacement is fairly easy in most Fords as they simply pop outof the door panel openings with slight pressure from a screwdriver. Unplug theswitch assembly, replace it with a new unit and press it back into the doorpanel. Test the window for operation.
3.Check the window glass for excessive play or signs of a "slippedtrack." The glass is secured by the window regulator that can failmechanically and cause the glass to become stuck. Repair this by removing thedoor panel (turn the armrest bolts and door handle screws counterclockwise,then disengage the pop rivets) and removing the motor by unplugging it alongwith the mount bolts. Replace the entire window regulator if the hinges andinternals cannot be repaired. Replace the motor by pressing it into the windowregulator gears, then securing the mount bolts and reconnecting it to theharness. Replace the door panel and switches, then test the window.

4. Check for operation of the window with the engine on and off, and with thekey in different positions.

Nov 09, 2010 | Ford Fairmont Cars & Trucks

1 Answer

Electric windows dont work. they are intermittent at best both are up now and I am afraid to use them for fear once down ill never get them back up. When I use the switch now nothing happens


there is a fuse panel under the dash on driverside unlatch and pull down. test the fuses with a test light to find the blown fuse there. then look under the hood in power control box. lift the lid and look inside lid for the relay. there again u need a light tester to check all fuses that are blown. if none are found then the relay is bad. also u may have windows that are binding if so it will put strain on window motors and cause this problem again.

Apr 20, 2010 | 2000 Dodge Caravan

1 Answer

Electric windows and tempeture on dash are not working


IF ALL WINDOWS ARE NOT WORKING IT LOOKS LIKE.THE POWER WINDOW CIRCUIT BREAKER IS BLOWN.CHECK THE HEATER AND AC IGNITION FUSE.MAKE SURE POWER IS AT THE SWITCH.IF ALL IS GOOD.CHECK BLOWER MOTOR FUSE AND RELAY.IF THEY ARE GOOD.HOT WIRE BLOWER MOTOR IF IT WORK YOU HAVE A BAD BLOWER MOTOR SWITCH AND RESISTOR.IF BLOWER MOTOR DONT WORK.REPLACE BLOWER MOTOR.

Aug 26, 2009 | 2007 Ford Focus (3 Door) Hatchback

1 Answer

My rear left window will not work in my 2001 civic lx where can I locate the fuses to solve this issue?


a defective or blown fuse would cause all the windows to stop working, so that is not te problem, most likely the electric motor that moves the window is defective inside the door.

Mar 22, 2009 | 2001 Honda Civic

1 Answer

Power windows not working what can I do. Thanks


As an owner of Jeep Cherokees both older and newer than your model, the following is only a guess.
For the older units, the fuel block is located under the left side of the instrument panel. Mid 90s units had the fuse block located in the right side kick panel, behind a cover. Late 90s had the fuse block located in the right end of the instrument panel under a cover.
A blown fuse is easy to identify through the clear plastic body. Also, the fuses can be checked with a test light. If replacement is necessary, BE SURE TO REPLACE WITH THE SAME AMPERAGE (i.e. use the same color as the blown fuse for a replacement).
Repairing an electric window often requires specialized tools. However, you can check the fuse(s) as you suggested (there may be one for all windows or separate fuses for each door motor), the actuating switches for broken/loose wires, and you can remove the door panel(s) to check the motor wires to see if they are loose or damaged.
Check to see if the affected window fails to respond to only the switch on the driver's door or the switch on the affected door itself. This may help narrow down the search
Just some general ideas which may be helpful.
Dale

Nov 27, 2008 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...