Question about 1988 Chrysler New Yorker

Open Question

My 1988 Chrysler New Yorker Fifth Avenue has trouble when accelerating, especially when coming out from a stop light or sign, or being idle for a couple seconds. If I press to much on the gas, it may die altogether. It does sputter a bit and it takes awhile for it to pick up speed, like it's trying to get as much gas as it can for the speed I want, and really trying hard to. I have replaced the fuel filter, plugs, wires, air filter, cleaned the carb., and I just don't know what to do! I feel like i'm a danger (and annoyance) to those behind me because I have to take it so slow and cautious so it doesn't die. It's also dangerous going up hills because it will either slow waaay down or die. Please let me know what I can do! I went to an auto shop and they said they couldn't do a scan if the check engine light is not on, which it's not.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1894 Answers

SOURCE: could this be wiring problem

the wires are getting shorted at some point.

please check the wiring

Posted on Jul 14, 2008

shocktroop40
  • 155 Answers

SOURCE: Replace a fuel pump on a 1993 Chrysler Fifth Avenue

It sounds like a fuel line broke, most likely because it rusted through. The fuel pump is running otherwise you wouldnt see any fuel spewing out from under the car. Get under the car and see where the line broke. In most cases, you can replace the broken section of line and it will be fine.
To answer your question though, to replace the fuel pump, you will need to remove the fuel tank from the car, as the pump is attached to the sending unit inside the tank. To remove the tank, you will need to disconnect the fuel filler neck, the fuel lines, and unplug the electrical connector, then get a jack under the tank and remove the straps holding the tank in the car. Lower the jack and you will be able to access the top of the tank where the sending unit is located. Romove the lock ring holding it in, and remove it from the tank.

Posted on Nov 21, 2009

Testimonial: "Got exactly the information I suspected was my problem."

jlisagearhea
  • 412 Answers

SOURCE: is the power steerring pulley for a 1990 Chrysler

The power steering pulley itself has to be pressed both on and off.I hope I could help.Get back to me with any questions.

Posted on Jan 13, 2010

wracefans24
  • 1985 Answers

SOURCE: chrysler new yorker fifth avenue 1990 wit the 3.3

pressed on you need a puller to remove it and to push it back on

Posted on Jan 20, 2010

  • 114 Answers

SOURCE: We bought a 1991 Chrysler New Yorker Fifth Avenue,

Check either the NADA or Kelly Blue Book web sites.
They will guide you through the info to enter.

Posted on Mar 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the procedure for removing the power steering pump


1982 Chrysler New Yorker Power Steering Belt Removal ...

? 0:35
www.youtube.com/watch?v=vZD17F_ao-o
Jan 18, 2015 - Uploaded by Kerman 559 Sanchez
1982 Chrysler New Yorker Power Steering Belt Removal ...1990 Chrysler New Yorker Fifth Avenue Start Up, Engine, and In Depth Tour ...

1990 chrysler new yorker 3.3 power steering pump change ...

www.fixya.com/cars/t15056742-1990_chrysler_new_yorker_3_3_power
Nov 18, 2012 - SOURCE: 1990 new yorker alternator replacement. You are right aboutremoving the motor mount. You have to support the engine with a jack.
images for 1990 Chrysler New Yorker remove power

Oct 20, 2015 | 1990 Chrysler New Yorker

1 Answer

My 1988 chrysler new yorker dies when its hot and when i try to start it again its like it isnt getting any fuel


try cleaning the throttle body if they get even a little dirty they will stall,be hard to start,idle iradically [idle dips at a stop then goes up]

Aug 26, 2010 | 1988 Chrysler New Yorker

1 Answer

1991 Chrysler New Yorker, FIFTH AVENUE. Power Antenna stuck.


sound's like the motor is bad if you have someone turn it on as you stand by to hear the motor kick on would be the best way to know. if it is a good motor it is off track if that's the case turn it on and try to get it with a pair of needle noise pliars and pull it out.

May 09, 2010 | 1991 Chrysler New Yorker

1 Answer

Chrysler new yorker fifth avenue 1990 wit the 3.3


pressed on you need a puller to remove it and to push it back on

Jan 13, 2010 | 1990 Chrysler New Yorker

1 Answer

Is the power steerring pulley for a 1990 Chrysler new yorker fifth avenue a bolt on or press on


The power steering pulley itself has to be pressed both on and off.I hope I could help.Get back to me with any questions.

Jan 13, 2010 | 1990 Chrysler New Yorker

1 Answer

I need a belt diagram for 1991 chrysler fifth avenue


belt diagram shuld be on the inside of the hood unless its been wrecked or replaced?

Nov 10, 2009 | 1991 Chrysler New Yorker

1 Answer

Belt diagrams for a chrysler new yorker


call a chrysler dealer and they can fax you a copy of the diagrams that you need

Jan 23, 2009 | 1988 Chrysler Fifth Avenue

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...