Question about 2008 Chevrolet Tahoe
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
2008 Ford F-150 SuperCrew Cab (without moon roof or rails): How to replace the map light bulbs. First, you'll need a "trim pad remover." It is a tool with a screwdriver handle and the metal part has a 'smooth' forked tongue (see Snap-on Stock#: A177A for picture). Go to the center counsel and "gingerly" work around he counsel and pull down at the same time. The counsil is held in by six snap in tongs. It should remove pretty easily. once down, you'll see where the bulbs are. Unscrew and replace. Now, just line up the tongs and gently bump or hit the pressure points (where the tongs are) and it should snap into place. It should take no more than five minutes, tops.
Posted on Nov 17, 2008
first you have to lift the hood then remove the headlight pins and then stick you're hand down on the left side push the clip in and gently pull the housing out then push the white clip andturn the housing counter clock wise and pull out
Posted on Jan 11, 2009
Have you checked your fuses? If it is not a fuse then take a flathead and gently pry the cover off, remove light and take with you to parts store for replacement comparison, replace light same way other came out and replace cover. Check your owners manual for specific fuse locations.
Posted on May 17, 2009
Pop the hood and locate the rubber piece that is behind the headlight. Remove the plastic screw that holds it in place and you can easily just bend down the rubber piece to gain access to the bulbs. The driver side is a little tighter to get into because it sits next to the windshield washer fluid container.The passenger is a lot easier but you do have to remove the air box which is very easy.
Posted on Nov 07, 2009
You will have to pry off the lens CAREFULLY using a small screwdriver. There are two (or more) little plastic protrusions on each long side of the lens which fit into the casement. Look for very small slots along the side of the lens to insert the blade of the screwdriver. You can ease the casement away from the lens enough to get it to pop out. Re-inserting it is the same, but probably easier.
Gently, give it a try.
Hope this helps you.
Posted on Nov 21, 2009
Tips for a great answer:
Jan 02, 2017 | Cars & Trucks
Feb 27, 2014 | Chevrolet Tahoe Cars & Trucks
Oct 27, 2013 | 2003 Chevrolet Tahoe
May 19, 2011 | 2008 Chevrolet Tahoe
Oct 13, 2010 | 2007 Chevrolet Tahoe
Jan 18, 2010 | 2008 Chevrolet Malibu
Oct 10, 2009 | 1999 Chevrolet Tahoe
Aug 25, 2009 | 2008 BMW 3 Series
272 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: