Question about Chevrolet Chevy

Open Question

Need timing marks for 1999 chevy tracker dule overhead cam 2.0

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
johnny5846
  • 379 Answers

SOURCE: NEED TIMING GEAR ALIGNMENT PICTURE

99 sportage 2.0 timing gear set up

this link will provide the exact information and diagrams you are looking for . thanks

J5

Posted on Jan 19, 2009

Ad
joecoolvette
  • 5660 Answers

SOURCE: need timing marks for Daewoo engine in Chevy Aveo

The crankshaft gear has a triangle timing mark on it. On the outside of the gear near the teeth. This points straight down, and lines up with a notch, on the bottom of the rear timing cover.

The camshafts have a mark on the outside of the gear, near the teeth. The camshafts are turned, so that the marks are to the inside, (in-between the gears), and the marks point to each other.

Posted on Jul 21, 2009

c17hydro
  • 2984 Answers

SOURCE: 1999 kia sportage timing marks

dfd3ea1.gif Crankshaft match marks


Align marks on timing belt pulley and pump body.

Camshaft pulley alignment marks
9f1c7ef.gif

  1. Align marks on camshaft pulleys with alignment marks on seal plate.
  2. Install timing belt. NOTE: No looseness should exist on the tension side and at the camshaft pulleys.
  3. Loosen tensioner lock bolt.
  4. Turn crankshaft 2 revolutions in direction of rotation and check that timing marks are still in alignment.
  5. Tighten timing belt tension lock bolt to 27-38 ft lb (32-52 Nm).
  6. Apply a force of 22 lbs to timing belt between camshaft sprockets.
  7. Belt deflection should measure 0.30-0.33 in (7.5-8.5 mm)
  8. NOTE: Replace tensioner spring if timing belt deflection is excessive.
Timing Belt Installation


eb770f2.gif
  1. Install lower timing belt cover.
  2. Install upper timing belt cover.
  3. Install power steering drive belt and adjust belt tension.
  4. Install fan pulley.
  5. Install generator drive belt and adjust belt tension.
  6. Install A/C drive belt and adjust belt tension.
  7. Install splash guard.
  8. Install fan and fan shroud.
  9. Install 4 fan bolts. Tighten to 24 ft lb (33 Nm).
  10. Install fan shroud mounting bolts.
  11. Install fresh air duct.
  12. Connect hose to resonance chamber.
  13. Connect battery negative cable.

Posted on Jul 26, 2009

  • 1757 Answers

SOURCE: timing marks on twin overhead cams 2.4 and crank mark.

Click on the following direct, Free Link. It has several Diagrams including the Timing Belt + Marks for your 2004 Hyundai Sonata 2.4L DOHC In-Line 4-Cylinder Engine (located on the bottom half of the Page on the Link). There are additional Diagrams that will prove to be helpful while you are doing this...

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2004/make/hyundai/model/sonata/2004_hyundai_sonata_timing_belt_diagram_marks.htm

Posted on Apr 16, 2010

Testimonial: "tHANKS, tHIS WILL DO THE JOB."

daves944
  • 1050 Answers

SOURCE: im looking or timing marks for 2,5 v 6 double

There is a huge service procedure for this job. It won't fit on this website given the allowable display area. If you'd like, you can either post an email address or drop me a note at: daves944 at yahoo dot ca, and I will send you a pdf of the whole thing when I get a chance later today.

Posted on Sep 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cam gear installation


very old post
96s in usa (not canada) are all G16b , 16v engines
so
here it full page, and full fsm page linkes, all free.
all 16v have cam cog false marks 2 false
key false and TDC false.
the "I" marks are dead wrong, and few books warn of this fact


http://www.fixkick.com/t-belt/16-fast-belt-install.html

all ways to do it right and correct the wrong(all ways)

Feb 18, 2014 | 1996 Geo Tracker 2 Door

1 Answer

Timing on a 95 geo tracker


old post.
G16a (8valve head) or G16b (16valve head)??which one
the 2 option engines are not the same.
first the cam must be timed, or spark is hopeless , due to its being end if the chain if events.
so, is cam belt fresh, 60kmiles or less.
its timed at #4 firing.
http://www.fixkick.com/t-belt/tbelt-index.html
see main menu, click your engine.,

spark is next, and guess what, again 3 engines. but 2 for you.
http://www.fixkick.com/IGN_timing/index.html

see , its all there, and even the factory pages are linked that tool
cam marks #4 firing.
distributor marks are #1 firing,
on all 3 engine, early 90s classes.
the cam cog wheel on your year, will have false markes
and is covered here, totally. (avoid "I" marks)

Jan 28, 2014 | 1995 Geo Tracker

1 Answer

How to find the timing marks on a 1993 geo tracker


on what, spark or cam???
this engine 1 of 2, has cam belt timed
and a distributor timed... know that as a fact;. please.

http://www.fixkick.com/t-belt/16-fast-belt-install.html

that is cam. on 16v only
the pages there cover both engine,, G16a and B.
TBI 8valve and MPI 16v engine.

Jan 24, 2014 | 1997 Geo Tracker 2 Door

1 Answer

Need help with setting timing chain marks to line up 1999 chevy tracker 2.0


Experts cannot provide answers without vehicle & engine details.

Please repost this question for the Experts, advising:

1) Make of vehicle
2) Model of vehicle
3) Year of manufacture
4) Engine type and capacity

Thanks,

Nov 01, 2011 | Cars & Trucks

1 Answer

Timing belt diagrahm for 2005 chevy aveo. i need to know how to line up the timing marks for a duel overhead cam.


each cam has a mark on it match the marks and you should be ok but to be on the safe side turn the engine by had 1 complete revolution to ensure that its not on an intake stroke when you install the new timing parts.

Sep 17, 2011 | Chevrolet Aveo Cars & Trucks

1 Answer

I have found the crankshaft marks but I cannot find marks to align the to over head cams on my car, the dohc are run from 1 wheel. I am trying to re-align the timing belt as i think they have gone off.


if it's a dual overhead cam then each head has two cams and two pully's, a single overhead cam engine has one cam and one pulley on each head. if the belt has more than 60,000 miles on it you should replace it. you need to find out if the engine is an interference engine or not to determine the level of damage caused if the belt has jumped or slipped. your overhead cam timing marks are usually on the cam faces and the backing plate behind the cam or sometimes there's two marks on the cam that you align with the surface of the head behind them. the first thing you need is a diagram of the belt routing and mark positions because timing marks are very important especially on an interference engine. starting or cranking an interference engine with the timing marks misaligned can bend all your valves or even punch holes in your pistons! so proper alignment is crucial, good luck.

Jan 02, 2011 | Mazda 323 Cars & Trucks

1 Answer

Where are the spark plugs located on a 2003 chevy tracker


Depends on if you have the dual or single overhead camshaft?
With single cam, the spark plugs are all on one side of the head, near the top. With dual, the spark plugs are right down the middle of the head, deeply recessed.

Sep 04, 2010 | 2003 Chevrolet Tracker

1 Answer

Timing marks on 1999 chevy cavilier 2.2.I'm


The Cam Gear has a hole it it. That what GM uses for a mark.. Gotta love them young engineers at GM for improving an age old way of just putting a diamond mark on tooth instead. LOL

Apr 24, 2010 | 1999 Chevrolet Cavalier

1 Answer

Cab brake light dont come on need wireing scem for cab. chevy up


think brake switcjh it is a dule part switch.. if bulb good then switch next culprit

Sep 04, 2009 | 1999 Chevrolet Silverado 1500

2 Answers

Tensioner on 2000 chevy tracker 2 litre


the plungr may be bad try a new one

Jul 19, 2009 | 2000 Suzuki Vitara

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

269 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...