Question about 1991 Ford Thunderbird

1 Answer

I have no brake lights ,flashers or blinkers,but my fuses are all good

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

It is your flasher relay switch. I had the same issue, and that piece is under the dash on the drivers side. The flasher relay switch is a little black box and I got it from my ford dealer for about 60 dollars. :)

Posted on Nov 24, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Flashers blinkers brake lights not working


I would say to 1st check for any blown fuses.

Chance are, there's only one that powers all the listed non-functioning lights.

Hope this helps.

Feb 24, 2015 | 1998 GMC Safari

1 Answer

No brake lights, blinkers, flashers . Fuses good bulbs good


make sure the 4 way flasher switch fully releases. May be a bad turn signal switch. Brake lights go though this switch.

Jun 16, 2011 | 1996 Lincoln Town Car

2 Answers

I have a 1992 Buick La Sabre Custom. My brake lights are not working but taillights, turn signals and hazard lights do work. Switch ok. fuse ok. ????????


if your fuse is good. and you have power at the brake light switch and when you hit the brakes you have power coming out the otherside of brake light switch/which would be the white wire/ check that the white wire is sending power up the turn signal switch. if theres power there and your turnsignals work? im afraid that your turnsignal switch is bad rare but it has been known to happen.

Jan 27, 2011 | 1992 Buick LeSabre

1 Answer

Breaklights do not work nor do hazards all fuses ok,switch is also good..blinkers work fine.. stumpt


The hazard flasher is a separate flasher by itself for the directional has its own. The brake lights work off the brake light switch mounted by the brake pedal

May 08, 2010 | 2001 Chevrolet Blazer

3 Answers

The blinkers and flashers are not working on my 2001 Grand Cherokee. Can you tell me where to locate the relay or switch to replace? Its not the fuse, we checked that first. thank you


when you get in your car and use the car turn signals and it does not work from the inside or out side and your hazard light dont work to then you need to replace the fuse located inside the front hood in a black box or inside the car located under the stering wheel next to the gas and brake pedle on the side. Remove it and check the fuses and flasher relay. The flasher relay in a black square looking fuse that has 3,4, or 5 prongs. That is your problem of why the hazord lights and blinkers are not working, you can go to a part store to find the flasher relay for 9 to 15 dollars max. Napa has more of a selection. PS.... when you find the flasher and its burn out it is no good ; make sure the volts match!!!! If you buy a flasher and it burns out instinly after replaced then wireing is short and go with less volts you hace to ballance things of your car was worked on before, things where changed. Check you lights in front and back brights and dim, brakes and reverse lights. replace bulbs if needed could correct the problem if flasher still doesnt let blinkers or hazord work. If bulbs where replaced and still no blinkers or hazord lights then you need a new or used (another) switch nob. You can go to a local junk yard and take off what you need off the same car you have and pay for it then replace it on your car. Or you can go to amazon ebay or such to find. If you are a WOMEN or OLDLADY or some one not good at removing parts then this is not your job. Find someone who can help, or pay something that could be so easyily done. I hope this solves your question.

Mar 31, 2010 | 2001 Jeep Cherokee

1 Answer

My rear tail light blinker wont come on


CHECK AND SEE IF THE BRAKE LIGHTS WORK,IF SO CHECK FUSES.IF THE FUSES ARE GOOD YOU MAY NEED A FLASHER.IF THEY WORK WITH THE HAZZARD LIGHTS ON BUT NOT WITH THE TURN SIGNAL,YOU NEED A FLASHER.

Oct 16, 2009 | 2001 Ford F150 Styleside SuperCrew

1 Answer

Where is the flasher relay unit


1ST double check that all the bulbs for the pass. side turn signals are working. if even one is out it can make the blinker not "blink". so compare the pass. side lights to the driv. side to make sure u did not miss something. NEXT,if thats not the problem, then u can locate the flasher by 1ST looking in the fuse box(probably inside the glove box or under the drivers side dash) theres a good chance it might not be there(years ago every car had the flasher in the fuse box) SO TURN ON THE DRIVERS SIDE BLINKER (key on) and LISTEN OR FEEL UNDER THE DASH FOR THE FLASHERS NOISE--LOOK NEAR THE STEERING COLUMN,BRAKE PEDAL, EVEN BEHIND THE ASH TRAY!! hope this helps you!

Sep 07, 2009 | 1994 Buick Century

1 Answer

TURN SIGNAL, BRAKE & HAZARD LIGHTS


No Turn Signal Operation (blinker)The turn signal lights in your car are a basic electrical system that controls the front and rear blinker lights to alert the intended direction of the vehicle. We have listed some of the most common problems and repair troubleshooting tips below:
Troubleshooting Procedure
To start troubleshooting this problem:
  • Turn the key to the on position (do not start engine)
  • Inspect the system fuse located in the fuse panel and replace if needed. If you cannot find the location of the blinker fuse consult your owner's manual or an online repair manual
  • When a blinker flasher fails it can cause blinker lights to say on, not blink, or not go on at all. To test the blinker system flasher, remove the flasher unit and insert a jumper wire between the two terminals. If blinker stays on in both directions without blinking, replace the flasher. If you cannot find the location of the blinker flasher consult your owners manual or an online repair manual.
  • 1b7f814.jpg

Jul 09, 2009 | 1999 GMC Denali

1 Answer

Brake light and flasher


check and test the socket ( pig tail ) that the lite plus int for power when the flasher is on. If there is power to it try a different bulb, if there is no power then you will need to trace the wiring circuit back towards the fuse box testing for power at all junctions. Good luck, and remember to rate all solutions you get. Thanx

Oct 28, 2008 | 1998 Chevrolet K1500

Not finding what you are looking for?
1991 Ford Thunderbird Logo

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...