Question about 2000 Daewoo Nubira

2 Answers

The timing belt broke while I was driving. I replaced it and set the timing according to specs. it will crank but not turn over. What could cause this

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,301 Answers

If the starter is cranking but the motor isn't turning over you have something wrong, remove the timing cover and crank the motor over, see whats turning and what isn't, both the cam and crankshaft should be turning over,, if it is, and by meaning its not turning over you mean its not starting you could have it 180 degrees out, check the number one plug to see if its on the compression stroke, which would place the rotor at the number one position inside the distributer cap,, if its pointing away from it, you have the timing set wrong. and need to reline the timing belt to the correct place

Posted on May 24, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,874 Answers

BENT VALVES !!!
You need to remove the cylinder head out from the cylinder block, and replace bent valves & damaged valve guides if necessary.

Posted on May 24, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 eclipse serpetine belt broke put new ones on now car turns over but won't start.


2001 GT Eclipse Spyder..cranked this morning, both drive belts broke, harmonic balancer came apart..replaced balancer, belts, now it won't fire. I did find a piece of one of the drive belts intertwined in the timing belt. Thing is absolutely not getting any fire.

Sep 23, 2015 | Cars & Trucks

1 Answer

Tiburon timing belt broke, replaced, won't start


Did you make sure you set cam & crank timing ? If the belt is off one tooth it will cause this. Recheck belt timing first.

May 22, 2012 | Hyundai Motor 2000 Tiburon

1 Answer

How to install timing belt on 1993 toyota camry 4 cylinder


1993 Toyota 2.2 you have valve clearance,meaning if you broke the belt driving you just broke a belt and NO VALVE DAMAGE. On the cam gear line that dot on top with the mark at the top if the cylinder head it a little dipple.As for the crank just line up the dots.There is nothing confusing turn one at a time or both at a time.

Mar 09, 2012 | Cars & Trucks

1 Answer

I was driving my 1991 honda accord an timing belt broke iam woorried that it might have damaged engine what should i look for i was going to replace belt an try to get back running any advice thanks


Honda engines are what they call interference engines. This means when a timing belt breaks, the pistons hit the valves and bend them. You will need to remove the cylinder head and get the bent valves replaced if you want it to run correctly. Impossible to know how many valves are bent, depends on how fast the engine was turning when the belt broke.

Aug 19, 2011 | 1992 Honda Accord

1 Answer

Ive been trying to set the timing on a 95' volvo 850. first replaced water pump 2 days before. finances kept me from replaceing any addition componants at that time. now im paying for it. the belt broke....


It is possible to set the timing wrong....if the belt broke well running I believe this is an interference motor..meaning if the timing is off the cylinder can move up and smack a Valve being exhaust or intake. which means a valve can break or bend cause lack of seal thus no compression. When setting the timing you want to align your marks with Cylinder # 1 it needs to be on the compression stroke..you can do this by removing cyl 1 spark plug and rotating the crankshaft with your finger over the spark plug hole you will feel air press against your finger meaning all valves are closed and your in compression stroke. Then line up your marks and you should have it...I would consider purchasing a compression tester to make sure no damage to the cylinder head....good luck hope this helps

Apr 04, 2011 | 1995 Volvo 850

2 Answers

Timming belt broke on 92 accord,set cranke to tdc


you will need to open the engine up if you can not turn the cam fully. something has been bent or broken or else it will turn. by breaking your timing belt was it shredded? if so you do have internal damage

Feb 11, 2010 | 1992 Honda Accord

1 Answer

I was driving down the road home from work yesterday and my 91 accord just shut off. i tried restarting it but it wont start. sounds like it wants to but wont.. what could it be.


Could be one of a few problems by your description. Ignitor unit(inside distributor housing) has failed.which would have no spark. P.G.M.F.I main relay failed,lose of fuel. Or very possibly has a timin belt that has jumped time or broke,this either would sound(if broke)like engine is spinning extremely fast will cranking over,(can also have someone watch through oil cap hole and see if there is cam movement while cranking over)if jumped time engine will try and stumble start but not quite,possibly backfiring while trying to start.either or requires belt replacement minimum and very good possiility of bent valves.how many miles?

Oct 16, 2009 | 1991 Honda Accord

1 Answer

I have a 1992 Ford Mustang 2.3L. The timing belt broke when I was driving and the motor shut down fast. I have replaced the timing belt and set the timing. BUT NOW I have no spark. any ideas..


Check your crank sensor. Sometimes, it can be put back in backwards causing no signal from the crank, therefore no spark. Check to see if there is signal coming out of the sensor, this is the first step to FixYa.

Aug 31, 2009 | 1992 Ford Mustang

1 Answer

Zx2 2-0 zetec engine new timing belt and drive belt


are you sure you are not 180 out on crank..crank turns twice to 1 turn of cam/s..top dead center #1 cyl. w/ both valves shut-[compression stroke] is what you want to start. some require special alighnment tools to alighn upper to lower''...kev-mn.

Dec 10, 2008 | 1998 Ford Escort

1 Answer

Volvo s80 not cranking


Check and make sure the timing belt has not slipped. It's possible that the broken drive belt got under the timing belt and made it skip. If this happened, you are in for an expensive repair!

Dec 09, 2008 | 1999 Volvo S80

Not finding what you are looking for?
2000 Daewoo Nubira Logo

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...