Question about Mazda 626

1 Answer

Were do u find a site that gives u abreak down on a mazda 626 cylnder head removal <1989>.....were do u start and wat is nessasry do take of and wat isnt...

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mazda Master
  • 2,002 Answers

If you want a web site I would suggest checking out alldatadiy.com. It costs about $30 a year and is very specific to your car. It will ask you some questions about your car when you register and will provide the info for that exact model. For example, if your car came with 2 different engines it will only give you the info on yours,not both.
You could also pick up a Haynes manual for your car. It will provide the info you need for this job, among other jobs. It can also provide some helpful hints and tips as well. You may be able to access them on-line, I never tried but it would probably be safer with a book on your fender instead of a laptop.
Chilton is another good source of info, good reputation in book form. You may be able to get it from them on-line too.
Hope this helps.

Posted on May 24, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Got a mazda 626 1989 model. blown head gasket. body and uphoulstry in perfect condition except for a crack on the passenger door by window. really good car seems a shame to just wreck it. any ideas how to...


You could sell it. I've just restored an 89 mazda and might be intereted in yours. If you're wanting to sell it send a price to my email monroewebb@hotmail.com

Aug 07, 2011 | 1989 Mazda 626

1 Answer

Spark plug wire diagram position from distributor to engine on mazda 626 4 cylendar


For the 1996 Mazda 626 2.0L DOHC In-Line 4-Cylinder:

Firing Order:

1 - 3 - 4 - 2

Cylinders:
.........(back).........
|..1....2....3....4...|
........(front)

Distributor:
__________
/////////////////| <---2
_______________
//////////////////////////| <------1
___________
///////////////////| <----C
_______________
//////////////////////////| <-------3
__________
/////////////////| <----4

Let me know if this helped and thanks for using Fixya!

Aug 18, 2010 | 1996 Mazda 626

1 Answer

Overheating mazda 626 1989 model how do i know if


CHECK COOLANT LEVEL.IF COOLANT LEVEL OKAY A FAULTY.THERMOSTAT COULD BE THE POSSIBLE CAUSE.

May 04, 2010 | 1989 Mazda 626

1 Answer

Wiring diagram location for water gage sensor 1989 mazda 626 2.2L


one of the sensors is going to be located in the thermostat housing one is goint to be in the block or head.

Aug 29, 2009 | 1990 Mazda 626

1 Answer

White smoke on start up on 1998 mazda 626


Hi
Lots of things to check
?Leaking head gasket
Does it use brake fluid
Start engine only fo a few seconds, shut down, remove all spark plugs to see which ones are fouled

Aug 10, 2009 | 1999 Mazda 626

2 Answers

Mazda 626 2.2L Turbo 1989 - Alternator - Fuel Pump


Hi am just up the road on the SSC, it is easier to remove the alternator from underneath the vehicle & if you look under the carpet under the rear seat there is a plate which gives you access to the fuel pump cover in the tank. The pump can be accessed from there. If you want the workshop Manuals I have just uploaded them.
You can download the GD 626 Workshop manual & the Turbo supplement by going to the 626.net site.
Cheers

Jan 15, 2009 | 1988 Mazda 626 Turbo

1 Answer

Mazda 626 2.2L replaced head gasket,have compression of 120psi across all cyl, have fuel,spark turns over but no start checked timmming,marks #1 cyl up crank at TDC aligned on mark?


I can think of two possible causes:
1 - Assuming you are getting spark at the plugs, the distributor may be reinstalled 180 deg off.
2 - Unlikely but - Assuming you are getting fuel into the cylinders, the fuel injector connectors were reinstalled improperly and are firing out of sequence. If you are not getting fuel into the cylinders, it's something else.

Dec 11, 2008 | 1989 Mazda 626

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8729 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...