Question about 1994 Pontiac Firebird

1 Answer

Theres a exhaust piece one the top left hand side of the motor thats rusted and leaks air what is it

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 288 Answers

It should be likely the air intake that has a paper air filter that allows enough air into your engine because the engine needs air so it can perform. I ask you to get rid of the paper air filters because they choke the living hell out of your engine so I suggest that you buy a K&N air filter that you do not have to clean for about 50,000 miles and this air filter gives your car greater performance by letting more air into your engine. You will see that you do not need to push on the gas pedal now when you changed that air filter to an K&N filter high performance.

Posted on May 24, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Exhaust leak


The only proper exhaust fixes, are to remove any
leaking,damaged or rusted out parts & replace

If the pipe that is on the motor looks like a tube header,
it may be able to be TIG Welded,but it will have to be
media blasted, as it will be contaminated & hard to weld

A salvage yard piece may help you out

Sep 30, 2012 | 1987 Nissan Pickup

1 Answer

Oil leaking at the left top of engine


Sounds like your valve cover(s), they are very easy to put new gaskets on if you know what you are looking for. If it is a 4 cyllinder, you will only have one on top, if you touch the top of your motor, your hand is on it. If you have a 6 cyllinder, there will be one on each side above your exhaust manifolds. Either way, if it isn't your valve covers, I would need a little bit more information to pin point the leak. Thanks.

Apr 06, 2010 | 1998 Toyota Camry

2 Answers

How to change an exhaust manifold leak 7.5L


Right-Hand
Removal
  1. Remove spark plug heat shield (12A406).
  1. Remove distributor to spark plug wires (12286) using Spark Plug Wire Remover T74P-6666-A.
    1. Disconnect muffler inlet pipe.
    1. If equipped with secondary air injection, disconnect the secondary air injection check valve tube (9B480).
    1. Remove attaching bolts and right exhaust manifold (9430).
    1. Inspect joint faces for signs fo exhaust leaks, cracks or any defect that would make exhaust manifold unfit for use







Left-Hand Removal






1. Remove oil level indicator tube (6754).
  1. Remove spark plug heat shield.
  1. Remove distributor to spark plug wires using Spark Plug Wire Remover T74P-6666-A.
  1. Disconnect EGR valve to exhaust manifold tube (9D477). If equipped with air injection, disconnect the secondary air injection check valve tube.
  1. Disconnect muffler inlet pipe.
  1. Remove attaching bolts and exhaust manifold (9431).
  1. Inspect joint faces for signs of exhaust leaks, cracks or any defect that would make the exhaust manifold unfit for use.
Installation
  1. Clean mating surfaces of right exhaust manifold or left exhaust manifold and cylinder head (6049). Clean mounting flange of right exhaust manifold or left exhaust manifold and inlet pipe(s). Clean mounting surface for air injection tube or right exhaust manifold. Apply light film of Premium Long-Life Grease XG-1-C or -K or equivalent meeting Ford specification ESA-M1C75-B to right exhaust manifold or left exhaust manifold.
  1. Position right exhaust manifold or left exhaust manifold on cylinder head. Install attaching bolts and washers, starting at fourth bolt hole from front of each right exhaust manifold or left exhaust manifold. Tighten bolts to 34-47 Nm (25-35 lb-ft), working from center right to both ends.
    1. Position inlet pipes to right exhaust manifold or left exhaust manifold. Install attaching nuts and tighten to 34-47 Nm (25-35 lb-ft).
    1. Position the secondary air injection check valve tube and the secondary air injection tube gasket (9C435) at rear of right-hand exhaust manifold. Install attaching bolts and tighten to 19-25 Nm (14-18 lb-ft).
    1. Attach the secondary air injection manifold tube (9B449) to left-hand exhaust manifold fitting (located under EGR tube). Tighten nut to 30-40 Nm (22-30 lb-ft).
    1. Attach the secondary air injection check valve tube to rear of right-hand cylinder head. Tighten bolts to 75-85 Nm (56-62 lb-ft).
      1. Connect EGR valve to exhaust manifold tube to left exhaust manifold, if removed. Tighten nut to 53-72 Nm (39-53 lb-ft).
      1. Install spark plug heat shield and distributor to spark plug wires.
      1. Install oil level indicator tube to left exhaust manifold, if removed. Tighten nut to 13-24 Nm (10-18 lb-ft).
      2. Start engine (6007) and check for exhaust leaks.







b913da4.gif
28b39c6.gif
Hope this helps you...WF †

Mar 10, 2010 | 1996 Ford F250 Crew Cab

1 Answer

2001 mazda 626 where is the thermostat so i can replace it i have the thermstat and the washer is it on the top or bottom of the car?


If you have a 4 cyl. it is located in the front of the motor, on the left hand side, right beneath the exhaust manifold..There is a Hose connected to it...Now if you have a V6, then it is located on the back of the motor, just follow that hose on the top right side of the radiator..you have to take the air filter, and the box out to get to it..

Jan 19, 2010 | 1996 Mazda 626

1 Answer

When it pumps up it leaks right back down that is when it actually pumps up but with soapy water in a spray bottle i can not find a leak one. but there is a leak in the main line t still it is very small...


I am going to assume you are referring to the front airsprings. The right hand side has a top cover plate that actually seals the bag to the strut. In some instances the a/c line that runs over the top of the plate leaks condensation onto the plate, over time rust forms and pits form under the plate, and that is where the leak is coming from.

Oct 16, 2009 | 2003 Lincoln Navigator

1 Answer

Bad oil leak around oil pan, does somebody have an engine diagram for the Dodge 3.0 in this Grand Caravan?


This is what I found on my 1998 with a 3.0 motor Most likely you have a rusted pan with a hole on the passenger side of pan, clean the oil pan real good and inspect it real good and check for small leaks,
Also the transmission pan is also known to rust through on the left side top and bottom, Salt and brime plays heck on all pans and brake lines

Sep 30, 2009 | 1996 Dodge Grand Caravan

1 Answer

Coolant leak from rear of engine in bellhouseing area


Sounds like you have a freeze plug that has rusted out. And it is located in side the bell housing behind the flywheel. You will need to remove the transmission and the flywheel to gain access to the freeze plugs. There are two of them at the rear of the engine above the center line of the crankshaft. One to the left and one to the right.

May 24, 2009 | 1994 Pontiac Firebird

1 Answer

AIR LEAK IN TOYOTA COROLLA FUEL TANK


you'r EVAP system is not purging the system . I suspect it is your charcoal canister located in the left side of the engine compartment located near the master cylinder its a piece of cake to change it just slides up after you diconect the lines .

Feb 02, 2009 | 1993 Toyota Corolla

2 Answers

1998 Grand Prix Interior Water Leak


yea on bottom rt of ur windshield is what is called the cowl black plastic piece arond the bottom of ur windshield underthat should be weather stripping that may have come off

Jun 09, 2008 | 1998 Pontiac Grand Prix

Not finding what you are looking for?
1994 Pontiac Firebird Logo

Related Topics:

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...