Question about 2004 Dodge Durango

1 Answer

I have a 2004 Dodge Durango With Out a Tow Package. I need to install a Break Controller on in. I have already put the Y connector for the 4 pin harness on, and then installed the 7 pin kit to that. It left me with the wires for a Break controller at the rear of the vehicle. Is there a plug under the dash that hooks up the controller, and where are the wires located at the rear of the suv to attach them?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dodge Master
  • 12,104 Answers

As to under dash will need to look up for a plug and play adapter [if their is one ] and as to the rear plug and play adapter usually tap off connections behind rear light lens or behind the trunk panel

Posted on Jul 31, 2017

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: No power to tail light on trailer- 2004 Dodge durango factory tow

If this is a factory light harness for the trailer hookup on your Caravan. Look under the hood for a fuse box. Many 2000+ vehicles have this with separate fuses just for the trailer lights.

Posted on Jun 10, 2009

wracefans24
  • 1985 Answers

SOURCE: 99 dodge durango pcm and connectors heat up causing the vehicle..

it would be best if you took it to a dealer and left a mechanic take it home over night,that way he can have the Chrysler drb hooked up when the problem presents its self.

Posted on Jan 21, 2010

  • 50 Answers

SOURCE: Im trying to install a brake controller in my 1997

It may be there but just taped up out of the way I have seen them close to the cetre underdash going towards the radio area

Posted on Aug 18, 2010

  • 22 Answers

SOURCE: Looking to put a hitch on my ram 1500(2001). Is

the wiring harness is the econimical way to go about it; it serves the same function as if you had a tow package. But if you want the Dealer Tow package look, there are multible harnesses that you can just plug into the existing plug under your vehicle

Posted on Dec 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My trailer that has electric brakes installed and a 7 prong plug connector. My Tundra has a tow package with a 7 prong plug.


One of the vehicles would also need to be fitted with a electric brake controller. If the Tundra already has one fitted then the answer would have a 99% chance of yes.

May 21, 2015 | Cars & Trucks

1 Answer

2004 dodge ram, factory tow package. new trailer harness and lights, brake and turn signal work, no running lights. checked all fuses, they look ok. haven't tested w/ another vehicle yet to see if it is...


take a test light and check for power at the pins, also try cleaning the pins on the conector. if you plug it in and the running lights still work on your truck its probably a broken wire.

Sep 27, 2013 | 2004 Dodge Durango

1 Answer

I have a 2000 Dodge Durango and I keep blowing the fuse for instrument lights and tailights


hello same pronlem with my 98 durango but right turn signal!

what it was is the 4 pin connector for the tow package had the insulationripped off them i guess whe backing out of a steep driveway it sxrapped! so the headlights, turn signals, and brake circuits where grounding out! quick fix!

just cut and capped that mess!

good luck

Mar 02, 2013 | 2000 Dodge Durango

1 Answer

I have a tow package on my 04 durango but can't find the harness


Someone may have installed the hitch aftermarket but opted not to install the wiring harness. You might need to get a new harness.

May 20, 2010 | 2004 Dodge Durango

1 Answer

Hello, I have a 2000 GMC Jimmy that came with a rear hitch for towing. I need to install a brake controller and plug connector. I bought the 6-pole connector kit but I don't know what to buy other than the...


Hello Brenda, the tow package wire is tucked into the rear of your Jimmy near the hitch. The controller, unfortunately also needs to be installed in the cabin of your vehicle. I recommend that you call a few local repair shops, tell them what you have and what you need and shop for the best price. Regards, Joe

Feb 15, 2010 | 2000 GMC Jimmy

1 Answer

I do not have power on the aux. terminal in the trailer plug on a 2008 dodge ram. Any ideas?


You have got 7 pin trailer connector that was included in the optional trailer tow package. This trailer tow package also includes an electric trailer brake wiring provision that terminates at a connector located on top of the large body harness connection under the instrument panel to the left of the break pedal, as well as an electric trailer brake pigtail harness and an instruction card that are stored in the glove box when the vehicle is shipped from the factory. You will need to add an electric brake controller of your choice that will plug-in to the harness and that will also give you power on your auxiliary circuit.

Oct 04, 2009 | 2008 Dodge Ram Pickup 2500

1 Answer

Need wirering diagram to hook up trailer lights and elecric break


Also try http://www.etrailer.com/faq-wiring.aspx. They have a great website with lots of info. With the tow package, there should be a plug under the dash... far left above the emerg. brake petal. The harness that plugs into it should have came with the truck, or you can order one to fit it. Did thew truck come with a 7 pin plug on the back? If not you can order one from the above mentioned site. They also have the wiring colors.

Aug 12, 2009 | 2004 Dodge Ram 1500

1 Answer

Brake contoller showing 4 volts on the connector pin all the time


If the controller uses a SCR to switch the power on to the trailer brakes there can be some low voltage leakage across it. If you measure the amperage I would guess it's milliamps.

May 22, 2017 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

I want to install a break controller on my 1995 dodge dakota.


If your vehicle came with a "Trailer Tow Package" there will be a four wire connector located under the dash, usually tucked under the carpet near the pedal support bracket. If that is present it will have the circuits you need.
Chrysler tried to make it easy to hook those up. And you may even find the connector and pigtail in the vehicle. (they shipped it in the glovebox, however it may have been relocated by now)
If it doesn't then you will have to hard wire it. But look first.

Mar 24, 2009 | 1995 Dodge Dakota

2 Answers

ABS hydraulic control unit


Go to Module Master. I had the same problem sent mine in and came back. took less then 5 minutes to R/R. www.modulemaster.com

Prior to 2004, Durangos with 4 wheel ABS use the Kelsey Hayes Dodge controller attached to the hydraulic unit. Durangos with just rear wheel ABS use the Kelsey Hayes 125 located separately from the hydraulic unit.
2004 and later Durangos use the Bosch 5.4 controller.

Kelsey Hayes Dodge 1) Disconnect the negative battery cable.
2) Push the harness connector locks to release the locks, then remove the connectors from the CAB.
3) Disconnect the pump motor connector.
4) Remove screws attaching CAB to the HCU.
5) Remove the CAB.

Kelsey Hayes 125 1) Push the CAB harness connector lock to release the lock and remove the connector from the controller.
2) Remove the RWAL valve harness connector from the controller.
3) Remove the controller mounting screws and remove the controller from the mounting bracket.

Bosch 5.4 1) Pull out the side locking tab on the Bosch controller as shown.
2) Remove the connector.
3) Remove the 6 screws and separate the controller from the hydraulic unit.

durango.jpg 2008 Dodge Durango
kh_dodge_location.gif Kelsey Hayes Dodge Location
kh310_location.gif 1997 and earlier Durangos using the Kelsey Hayes 310
kh125_location.gif
Kelsey Hayes 125 controller for Dodge trucks with rear wheel ABS only

Jul 12, 2008 | 2000 Dodge Durango

Not finding what you are looking for?
2004 Dodge Durango Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...