Question about 1999 Ford Escort

1 Answer

How to Ford Escort ZX2 Cl L4 2.0 replace crank sensor

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 27 Answers

The Crank Sensor is on the block, below the Exhaust manifold. You will need a T-20 Torx bit to take loose the bolt that holds it in. The wiring for it goes down the block on the front side and is off the same harness that the coolant sensors are on.

Posted on Jun 01, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 Ford Escort ZX2 won't start. It's not getting any spark. Have replaced coil, plug wires, and spark plugs.


run the fault codes and check for cam/crank position sensors, broken timing belt and immobiliser operation.

Jan 25, 2015 | 2002 Ford Escort

1 Answer

1999 ford escort zx2 cranks but won't start


As with any no-start issue, you will need to figure out if you have a problem with fuel pressure to the injectors, or spark to the plugs.
I would also check the computer for trouble codes.
Let me know what you find out.

Jul 30, 2012 | 1999 Ford Escort

1 Answer

Where is the crank sensor located in a 2000 ford escort zx2


The Crank Sensor is on the block, below the Exhaust manifold. You will need a T-20 Torx bit to take loose the bolt that holds it in. The wiring for it goes down the block on the front side and is off the same harness that the coolant sensors are on.

May 26, 2011 | 2000 Ford Escort

1 Answer

Where is the crank sensor located on a 2001 ford escort zx2 model?


The Crank Sensor is on the block, below the Exhaust manifold. You will need a T-20 Torx bit to take loose the bolt that holds it in. The wiring for it goes down the block on the front side and is off the same harness that the coolant sensors are on.

May 26, 2011 | 2001 Ford Escort ZX2

2 Answers

Location of cam and crank position sensors


The cam sensor is located at the front right front side of the cylinter head, while you are facing the engine.---------- The crank position sensor located below the pcv valve that is located on block not the valve cover, its below the exhaust manifold. You will have to remove the catalytic converter to see the exact view of both the sensors. The camshaft sensor is on the head. The crankshaft sensor is in the block, just below the exhaust manifold. ------------ Thanks.Helpmech.

Nov 12, 2010 | 2001 Ford Escort ZX2

1 Answer

I need a fuel system diagram for a 1998 ford escort zx2, we are trying to replace the crank sensor


The crank sensor is located on the block at the front of the engine bay. You may have to remove the catalyst to get to it. It is held in place by a torx screw and has a two wire connector.

Sep 06, 2010 | 1998 Ford Escort

2 Answers

Changed timing belt on my 99 ford escort zx2 car no


if you have a no spark scenario i would check your crank sensor located at the top left side of the harmonic balance pulley.the crankshaft (about 11'oclock) a 2 wire plug with a sensor on it check to see if it is damaged or unsecured. this sensor can cause no spark if not working correctly. This sensor is based of frequency not voltage testing is difficult, just make sure that there isnt too muck air gap. and that it is secured.Lastly may want to check timing possible that the belt has jumped some teeth and she has fallen out of timing. maybe a bad tensioner The coil will adapt i think up to 10 degree, ****** or advance. Good luck

Apr 18, 2010 | 1999 Ford Escort

1 Answer

Need 2001 ford escort zx2 DOHC engine information, belt diagrams


The tensioner is between the a/c compressor and crank pulley, below the power steering pump. Use a 13 mm wrench to 'tighten' the bolt in the center of the pulley and it'll move to release tension off the belt.

Jan 25, 2010 | 2001 Ford Escort ZX2

1 Answer

2002 ford escort zx2 camshaft sensor fit a 99 zx2?


Yes, All the years of the ZX2 utilize the same engine. 1998-2003 are all the same except for ECU programing and the MAF wiring. You should not have a problem.

Apr 07, 2009 | 2002 Ford ZX2

Not finding what you are looking for?
1999 Ford Escort Logo

Related Topics:

254 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...