Question about Mercury Capri

1 Answer

All lights work including high beam, but NO low beam. 1994 Capri.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 75 Answers

Hi, ther are two elements in each headlight bulb , one for high beam and one for low beam and your low beams are burnt out ,you will have to replace the bulbs to have low beams too , which you can get at the auto parts store, they are not very expensive or difficult to do .

Posted on May 24, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My low beams dont come on when i turn my lights on but the high beams work


either one?
could be dimmer switch or just both burned out, try jumping high beam wire to low beam plug see if lights work

May 13, 2011 | 1994 Ford Mustang

1 Answer

High beams work but not both low lights do not work?


assuming you have checked the low beam fuses and assuming the fog lights do not work then you either have an defective combo switch or an open between the switch and the headlamp low beam circuit

Sep 15, 2010 | 1994 Honda Civic

1 Answer

Low beams stopped working but all other lights work


Need to have an electrical shop determine what is wrong.

It could be a fuse for the low beam headlamps that has blown,
or a relay has been overheated.

Check that the bulbs for the low beam aren't blown out, possibly
simultaneously.

Jul 08, 2010 | 2004 GMC Envoy

1 Answer

Low beams stopped working high beams work fine


Either both bulbs are bad(I've seen it before) or your
dimmer/headlight switch is bad. If you can without pulling the bulb, pull plug from the light. If it's a 4 lamp system pull the low beam. Do this on the left side as the right feeds from the left. With a 12v test light, check for power. (with lo beam on) if you have
power, change the lamp, if you don't it's most likly
the dimmer switch at the steering collum.
Hope this helps Good luck

Jan 21, 2010 | 1987 GMC VanDura

2 Answers

The high beams on my 1994 Jeep Cherokee work, but the low beams don't. The fuses seem to be okay. Any ideas what could cause this?


u should start by checking the bulbs, sometimes it is hard to tell your low beam bulbs are bad until they are both out, if they are both good try wiggling the headlight dimmer switch between high and low beam functions to see if the switch is just worn out. if neither of these presents the problem then u may have an electrical issue that should be diagnosed by a technician

Dec 04, 2009 | 1994 Jeep Cherokee

1 Answer

Low beam not working


Did you check the bulbs? Could be as simple as burned out bulbs

May 30, 2009 | 1994 Hyundai Excel

1 Answer

No low beam, high beam and parking lights work


Bad headlight switch that needs replacing

May 23, 2009 | 1994 Hyundai Excel

1 Answer

1994 ford f-150 with day time running lights headlightnot working


Daytime Running Lamps
The daytime running lamp (DRL) system is designed to turn the high beam headlamps on, with a reduced light output, and without illuminating the high beam indicator lamp in the instrument panel. You have a DRL Module.
The multifunction switch is the stalk on your column.

This is 96 F150 circuit. Don't have 94.

51f651c.gif
Symptom Chart, Headlamps HEADLAMPS Condition Possible Source Action
  • Headlamps Inoperative
  • Circuitry open/shorted.
  • Damaged headlamp switch.
  • Blown fuse.
  • GO to Pinpoint Test A .
  • Headlamps On Continuously
  • Circuitry open/shorted.
  • Damaged headlamp switch.
  • GO to Pinpoint Test B .
  • High Beams or Low Beams Inoperative
  • Circuitry open/shorted.
  • Damaged multi-function switch.
  • GO to Pinpoint Test C .
  • One High Beam or One Low Beam Headlamp Inoperative
  • Circuitry open/shorted.
  • Damaged connector.
  • Headlamp bulb damaged.
  • GO to Pinpoint Test D .
  • Flash-to-Pass Inoperative
  • Blown fuse.
  • Circuitry open/shorted.
  • Damaged multi-function switch.
  • GO to Pinpoint Test E .



73d6d64.gif

Feb 25, 2009 | 1994 Ford F150 Styleside Supercab

1 Answer

Volvo 940 headlights


dim lights are generally bad ground / rusty -loose ground points or wires

Jul 18, 2017 | 1994 Volvo 940

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

fordexpert

Level 3 Expert

5501 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...