Question about 1984 Chevrolet Corvette

Open Question

My 84 corvette (4 shifts automatic transmission) does not shift or does it at very high rpm. I also have The same Problem In my 79 blazer.please help me!

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
junkman1249
  • 552 Answers

SOURCE: Engine RPM too high when transmission shifts. Bangs into gear.

check your fluid level when the car is warmed up

Posted on Dec 05, 2008

Ad
godspeed808
  • 125 Answers

SOURCE: 98 Civic Auto Trans Slippage

you need to replace clutch pack for that gear can be ordered seperately from parts store or dealer if you want to save money call peach street auto recycling at 1800-365-2341 for a warrantied used one! also might be time for change trans filter and fluid filter could be slightly clogged but I lean towards clutch pack I replace these alot on Hondas

Posted on Feb 04, 2009

  • 13 Answers

SOURCE: 1993 mazda mx6 transmission is not slipping, but will not shift into higher gears. Will run at high RPM's and not shift up. Any suggestions on what it might be.. Mechanical, electrical, fluid change,

sounds like a shift solenoid in the trans.

Posted on May 10, 2009

  • 11 Answers

SOURCE: my transmission wont shift properly rpm goes up too high

sounds like the clutches are slipping or you have a bad seal in tranny, which wont allow it to keep pressure. have you changed the fluid and filter?

Posted on Aug 16, 2009

  • 96 Answers

SOURCE: Automatic transmission won't shift into drive

ok it could be a handful of things
First i would check the transmission fluid. drive the car around until its at normal operating temp then when you park it (with the brake applied) start all the way in first and walk it back through the gears back to park then leave the car on and get out and check the fluid. if its low add some and thats all it might have been. It usually maintains a reddish color if its brown or smells burnt (trust me you will know it) something isn't so peachy in your tranny.

This could also be your kickdown cable needs adjusting

Some transmissions (such as GM's 4T60E) have a Vacuum Modulator which could cause this

Or your gears are burnt out. now a-days typically caused by people trying to drive their automatics like stick shifts.... or constantly running on low fluid

Posted on Nov 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

High transmission shift points 1-2 and 1-3


Chevy automatic transmission workings (Bob Hale) - Yarchive

yarchive.net/car/transmission.html
When a sufficiently high RPM is reached then the weights hit stops and do ... There are two shift valve assemblies, one for the 1-2 shift and the other for the 2-3 shift. .... Thehigh RPM factory governor appears to have about 1/3 less metal in the ...

Possible Transmission Issue - weird shift points/high RPMs ...

thespeedfreaks.net > Jeep Talk/Tech > Tech Questions
Oct 2, 2012 - Thread: Possible Transmission Issue - weird shift points/high RPMs ... throttle pressure, but seems to blow past the 1st gear shift point and revs up to 4500 RPM or so then shifts. .... The 1 - 3 shifts actually felt pretty natural.

[PDF]Simple Shift Installation and Tuning Guide for Ford Trans ...

https://www.powertraincontrolsolutions.com/.../download.php?...Simple...

Dec 29, 2015 | Cars & Trucks

1 Answer

Why does my 1999 Chevy Blazer shift really hard into second gear without the RPM's increasing like the tranny's slipping?


Shifting hard broken modulator valve on the trany itself normally there a vacuum line connected to it

Mar 13, 2015 | 1999 Chevrolet Blazer

1 Answer

Not shifting 2 to 3 automatic tranmisson


The first thing I have to ask you is When was the last time the transmission was serviced? Transmission fluid and filter change?
A thumbs up would be greatly appreciated if this answer is helpful to you. Have a GREAT DAY and GOD BLESS YOU.

Nov 22, 2014 | 2001 Jeep Grand Cherokee

1 Answer

Rmp gage is not automatically shifting into next gear its just increasing to 3 & 4K RPM what could cause this?


it sounds like it is in safe mode it will start in 2 nd when it dose
you need to have it scaned

Jun 03, 2013 | 1998 Chevrolet Blazer

1 Answer

Transmission won't shift into high gear.


are there any codes? Does it shift ok in 1st and 2nd? sounds like your over drive shift solenoid or your 3 and 4 shift solenoid is stuck and needs to be replaced

Jan 02, 2013 | 1997 Chevrolet Blazer

1 Answer

Hi,my chevrolet trial blazer 2004 rpm is not going above 3000 rpm while in park or neutral and my gear is not shifting smoothly.


Hi and welcome to FixYa!

Few things can cause this issue. It can be a disconnected vacuum hose somewhere so please have a good look at it. It can be a faulty TPS (throttle position sensor) too. If the TPS is faulty the throttle response tends to fail so you will need to have it replaced. Regarding the shifting, I strongly suggest that you replace the automatic transmission fluid. If the fluid is burnt, the shifting tends to be rough and may shift only on high rpm.

Once the fluid is replaced, a smooth ride and shifting will be noticeable. Please have the following be checked to resolve the issue.

Have a good one and thank you for using FixYa!

Mar 11, 2011 | 2004 Chevrolet TrailBlazer

1 Answer

Suddenly lost reverse and RPM's run high before shifting


Assuming that you have an automatic transmission, check the fluid level. If ok, then schedule a visit with your transmission service shop.

Oct 29, 2009 | 2001 Chevrolet Blazer

1 Answer

Transmission in 1996 mazda 626 slow to shift high rpm


if its reving high then shifting then your trannys going

Jun 27, 2009 | 1996 Mazda 626

2 Answers

My 84 blazer wont shift


Your 84 wiring harness is for the TCC ( transmission converter control) system.
On the left side of the carburetor (driver side) you should have 2 cables, one for the accelerator and the 2nd for the TV (throttle valve) control. You will need to adjust the cable for correct shift points. Under normal circumstances you will have 7 to 10 mm's extending beyond the cable adjuster block.
Should take care of the issue for you.
Let me know.
Regards,

Apr 05, 2009 | 1984 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

212 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6910 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...