Question about 2009 Dodge Charger

1 Answer

Want to know to remove door handle cover on 09 dodge charger

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 92 Answers

CHECK UNDERNEATH OF THE HANDLE IF NO HAVE NO SCREW TAKE THE INSIDE DOOR PANEL TO GET TO THE HANDLE AND GO FROM THERE ON. IT MAY HAVE SOME SCREW HOLDING IT OR CLIPS

Posted on May 24, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I bought a 09 police dodge charger and the back doors won't open from the inside what parts do i need to get them to open


from what I've seen on the many ex-police units I'v had,everything is there,they just unhook the wires for the window switch,and locks and unhook the rod for the door handle.Never had a Dodge but ford,jeep and Gm all did it that way.

Apr 02, 2014 | 2009 Dodge Charger

1 Answer

What parts do i need to install to get the rear doors to open again from the inside of my 09 police dodge charger that i just purchase


from what I've seen on the many ex-police units I'v had,everything is there,they just unhook the wires for the window switch,and locks and unhook the rod for the door handle.Never had a Dodge but ford,jeep and Gm all did it that way.

Apr 02, 2014 | 2009 Dodge Charger

1 Answer

I can't open the gas tank panel on a Dodge Charger


There is a fuel filler door release switch on the driver's side door in the map pocket. The fuel filler door will pop open when the switch is pressed. It is closed manually.

If this system is malfunctioning, a manual release is located in the trunk. Remove the access cover which is located on the left-side inner trim panel and pull the release cable. The fuel filler door will pop open.

Source: Owner's Manual pages 418-421

Dodge Charger Owners Manual

Jun 15, 2012 | 2011 Dodge Charger

2 Answers

Removing rear door panel


On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls.

Jun 24, 2010 | 2003 Dodge Neon

1 Answer

About how much will it cost to fix the outside car door handle


parts & labor about 125.00 depends on what your labor charges are

Feb 09, 2010 | 2006 Dodge Charger

1 Answer

How do I removal a side mirror on my dodge magnum?


If you're lucky, on the inside of the door, will be a triangular panel right behind the mirror that you can pop off. If you're not as lucky and it's one piece or the panel is blocked by the door panel, you'll need to remove the door panel to change it.

On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can remove the bolts holding the mirror onto the door

Nov 15, 2009 | 2005 Dodge Magnum

1 Answer

I'm not sure how to remove the exterior door trim (door bumper guard) from a 2003 dodge caravan?


On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect any other wiring that may be attached to the door. Then you need to pull back the weather seal and then you can disconnect the screws and clips that secure the outside trim to the door.

Nov 03, 2009 | 2003 Dodge Caravan

1 Answer

How do I remove the passenger side power mirror on 98 caravan?


If you're lucky, on the inside of the door, will be a triangular panel right behind the mirror that you can pop off. If you're not as lucky and it's one piece or the panel is blocked by the door panel, you'll need to remove the door panel to change it.

On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can remove the bolts holding the mirror onto the door

Oct 28, 2009 | 1998 Dodge Grand Caravan

1 Answer

Replace door handle and lock 08 dodge charger


check that all screws have been removed from door. Hidden screws often found behind reflectors in door. Use prying tool and gently pull bottom of door panel away from doorm on/in door handle and near mirrow within door jam. Lay on the ground and look between the door and panle. You can usually see the plastic clips holding the door in place. Once bottom is loose you should be able to lift the door up and off of the door. Watch for power window and lock wires when removing. If manual windows, slide a rag behind window crank and move back and forth to remoce clip which holds crank on.

Jan 02, 2009 | 2008 Dodge Charger

Not finding what you are looking for?
2009 Dodge Charger Logo

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...