Question about 2000 GMC Sierra

1 Answer

My 2000 gmc sierra , tow/haul wire cut, how difficult to repair. next to steering wheel

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GMC Master
  • 2,431 Answers

Wont be difficult at all, you can either use a wire solder or use wire connectors just strip the wire and insert wire crimp connectors but you have to match the wire that are cut to each other,

Posted on May 24, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tow haul switch will not actvate tow mode / no indicator light on dash display


on shifter knob the switch is at the end. two wire are connect to it and they are cut inside column steering
i hope it help

Aug 14, 2013 | 2000 GMC Sierra

2 Answers

99 gmc sierra tow/hual when driving comes on and goes off by its self when in drive/od and revs engine when it does


Check that the orange wire in the right side of your steering column is not cut or broken. It has 2 conductors in it. When they short together, it will turn the tow/haul function on or off each time. If they don't touch each other, the tow haul function won't activate.

Oct 01, 2011 | 1999 GMC Sierra

1 Answer

I have a 2000 gmc 1500 Z-71 my tow/haul stays engaged and i am unable to turn it off ...it also come on by itself...


This is only an idea-pull column shifter boot-you will notice a ORANGE wrapped wire which runs from the button on the shifter down toward the steering column. This is the Tow/haul wire. The way this is positioned on the steering column will cause the wire to be pinched when ever the steering wheel is adjusted. This pinching can cause a short or cause the tow/haul not to work at all. NOTE: Inside this orange wire wrap are two very fine fiber wires. Be careful and good luck

Sep 08, 2011 | 2000 GMC Sierra

1 Answer

Tow haul switch quit working


Pull shifter boot-ORANGE wire which runs from Tow/Haul button down column-when the steering column is adjusted this wire will get pinched. Take a look-it took me six months to figure this out-thanks to NO help from GM.

Jun 22, 2011 | 2000 GMC Sierra

1 Answer

Tow haul not working any ideas


99 and up did that take the steering wheel cover off that goes around colum after u take it off u look at bottom u will see wire are broke

Oct 08, 2009 | 2004 GMC Sierra 2500

3 Answers

Tow haul light on sierra 2002 wont come on


I'v heard that the tilt wheel causes the wire to break. Most likely the wire has been broken. Somewhat easy fix.

Jun 24, 2009 | 2000 GMC Sierra

4 Answers

Tow/haul does not work on 2000 chevy truck. whereis fuse?


I had a problem with my tow/haul button not working. I came to find out that the gear shift had cut the wire running to the button in two. You may want to check that.

May 05, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Tow/haul light wont turn off


I have found that on three silverado's there is a plastic clamp on the bottom side of steering column where the wires become broken and can short out. You have to remove the column covers to see this, it should be claser to the lowe dash trim panel area needs a shifter to repair unless you can fix that little wire!

Apr 05, 2009 | 2000 GMC Sierra

2 Answers

Transmission tow/haul mode


Hi, the problem is when you are tilting the steering wheel all the way up it's putting to much tenstion on the wires that come outof your shifter that run to the tow/haul button. i am 99% sure your wires are disconected. rewire them and add some extra wire so next time there will be more slack in your wires.

Jul 20, 2008 | 2001 Chevrolet Silverado 2500HD

1 Answer

99 gmc 1500 pick up 4x4


found wires broke at shifter where it hooks to steering colum pull rubber boot loose at shifter base this was on my 2000 gmc new sierra

Jun 22, 2008 | 2000 GMC New Sierra 1500

Not finding what you are looking for?
2000 GMC Sierra Logo

Related Topics:

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...