Question about GMC K3500

Open Question

Gmc 5500 4x4 hub disassembly - K3500 GMC Cars & Trucks

Posted by on

1 Suggested Answer

  • 747 Answers

SOURCE: gmc 5500 4x4 hub disassembly

Get a service manual you won't want to make a mistake manuals are available at different parts houses as well as online or dealerships

Posted on Jul 30, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gmc 5500 4x4 hub disassembly


Get a service manual you won't want to make a mistake manuals are available at different parts houses as well as online or dealerships

Jul 30, 2012 | GMC Cars & Trucks

2 Answers

Replace front left wheel berring on 2002 GMC Yukon


do not replace only the bearing. replace hub assembly. remove rim/tire , remove caliper, mounting plate, rotor. . un bolt hub assembly, unplug abs. remove front axle nut if 4x4. you may need to rent the axle nut remove kit and hub puller. pull out hub. drive axle reward out of hub. install new part. do not torque hub over 90lbs. check with parts sell for spec

Jan 03, 2010 | 2002 GMC Yukon XL

1 Answer

How do I get rotors off front of 87 4Runner?


From memory, to remove the front disc rotors, the hub has to be disassembled completely from the vehicle. The rotors bolt to the hub from behind. Start by removing the calipers, then start disassembling the free wheel hubs, bearings etc.

Jul 19, 2009 | 1987 Toyota 4Runner

1 Answer

2001 GMC Jimmy - Wheel bearings


if u have to replace the whole hub asym it will come all togather.. or as a set of bearings that just sit in the hub.

Apr 03, 2009 | 2001 GMC Jimmy

2 Answers

98 gmc jimmy front hub


1. Put the vehicle in gear, apply the parking brake and break loose the driveaxle/hub nut with a socket and large breaker bar.
2. Loosen the wheel lug nuts, raise the vehicle and support is securely on lackstands. Remove the wheel. Remove the driveaxle/hub nut.
3. Unbolt the brake caliper and hang it out of the way with wire. Remove the brake disc.
4. On models with four wheel ABS, trace the electrical lead for the wheel speed sensor along the upper control arm, then forward along the frame rail and unplug the electrical connector.
5. Remove the hub assembly-to-steering knuckle bolts. Remove the brake disc shield and wheel speed sensor assembly and set aside.
6. Tap the hub assembly from side-to-side to break it loose from the steering knuckle. Pull the hub assembly off the end of the driveaxle. Wrap the end of the driveaxle with a rag to prevent damaging it. If the hub is stuck on the splines on the end of the driveaxle, use a puller to free it.
7. Installation is reverse of removal process. Be sure to lubricate the driveaxle splines with multi-purpose grease, and tighten all of the fasteners to the proper torque.

Jan 27, 2009 | 1998 GMC Jimmy

1 Answer

Install wheel hub assembly


take frt tire off,brake calyper and bracket,disc rotor,undo cv shaft bolt,unplug abs sensor under rubber splash guard ,undo 4bolts for hub bearing assembly from steer. knuckle.

Jan 04, 2009 | 1997 GMC Jimmy

1 Answer

1994 GMC Suburban front hub / bearing removal


Knock the wheel studs through the assy.

Jun 09, 2008 | 1994 GMC Suburban

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

194 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...